0.2.1

Добавил автоматическую настройку туннелей awmneziawg и wg

README.md

@@ -9,7 +9,7 @@ sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/domain-routing-openwr
 
 Оставляет туннели, зоны, forwarding. А также stubby и dnscrypt. Они не помешают. Конфиг sing-box будет перезаписан в podkop.
 
-# Установка
+# Установка Podkop
 Пакет работает на всех архитектурах.
 Будет точно работать только на OpenWrt 23.05.
 
@@ -20,6 +20,10 @@ sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/domain-routing-openwr
 sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/podkop/refs/heads/main/install.sh)
 ```
 
+Скрипт также предложит выбрать, какой туннель будет использоваться. Для выбранного туннеля будут установлены нужные пакеты, а для Wireguard и AmneziaWG также будет предложена автоматическая настройка - прямо в консоли скрипт запросит данные конфига. Для AmneziaWG можно также выбрать вариант с использованием конфига обычного Wireguard и автоматической обфускацией до AmneziaWG.
+
+Для AmneziaWG скрипт проверяет наличие пакетов под вашу платформу в [стороннем репозитории](https://github.com/Slava-Shchipunov/awg-openwrt/releases), так как в официальном репозитории OpenWRT они отсутствуют, и автоматически их устанавливает.
+
 ## Вручную
 Сделать `opkg update`, чтоб установились зависимости.
 Скачать пакеты `podkop_*.ipk` и `luci-app-podkop_*.ipk` из релиза. `opkg install` сначала первый, потом второй.
@@ -63,7 +67,10 @@ opkg update && opkg install sing-box
 
 # Известные баги
 - [x] Не работает proxy при режимах main vpn, second proxy
-- [ ] Не всегда отрабатывает ucitrack (применение настроек из luci). Не удаётся повторить
+- [x] Не всегда отрабатывает ucitrack (применение настроек из luci). Не удаётся повторить
+- [x] All traffic for IP ломает инет на клиенте. Proxy mode
+- [ ] Не отрабатывает рестарт, при awg и не применяются изменения при awg
+- [ ] awg работает не стабильно
 
 # ToDo
 Сделано
@@ -73,49 +80,49 @@ opkg update && opkg install sing-box
 - [x] Дополнительная вкладка для ещё одного туннеля. Домены, подсети.
 - [x] Улучшение скрипта автоматической установки. Спрашивать про туннели.
 - [x] Зависимость от dnsmasq-full
-
-Приоритет 1
-- [x] В nft разделить правило tproxy на маркировку и tproxy
-- [ ] Нужен дебаг. Restart ucitrack в отдельный скрипт postinst, не отрабатывает.
 - [x] Весь трафик для устойства пускать в туннель\прокси
 - [x] Исключение для IP, не ходить в туннель\прокси совсем 0x0
 - [x] Врубать галочкой yacd в sing-box
 - [x] Свои списки. Просто список доменов с переносом строки 
 - [x] Свои списки ipv4
-- [ ] Ntp (порт 123) делать маркировку 0x0. По галке
-- [ ] Вернуть две цепочки nft
+- [x] В nft разделить правило tproxy на маркировку и tproxy
+- [x] Вернуть две цепочки nft
+- [x] Ntp (порт 123) делать маркировку 0x0. По галке
+- [x] Открытый прокси порт на роутере для браузеров
+
+Приоритет 1
+- [x] Переделать на PROCD и выкинуть ucitrack.
+- [x] Нужен дебаг. Restart ucitrack в отдельный скрипт postinst, не отрабатывает.
+- [ ] Закомментировать дефолтные значения у list. interface поставить в пустое.
+- [ ] Скрипт установки: проверка установлен ли уже podkop. Если да, то просто предлагать обновится без установки тунелей и прокси.
 
 Приоритет 2
+- [ ] Списки доменов и подсетей с роутера
 - [ ] Кнопка обновления списка доменов и подсетей
 - [ ] IPv6
 - [ ] Придумать автонастройку DNS через stubby итд. Как лучше это реализовать.
 - [ ] Удаление подсетей CF из domain sets раз в N часов
-- [ ] Автонастройка wireguard по примеру getdomains
-- [ ] Автонастройка awg по примеру getdomains
+- [x] Автонастройка wireguard по примеру getdomains
+- [x] Автонастройка awg по примеру getdomains
 
 Wiki
-- [ ] Тема
-- [ ] Изначальное наполнение
-- [ ] Nginx+acme.sh ansible playbook
-- [ ] Сборка и деплой через github actions
-- [ ] Общий мониторинг VM
-- [ ] Мониторинг tls
+- [x] Тема
+- [x] Изначальное наполнение
 
 Низкий приоритет
-- [x] Открытый прокси порт на роутере для браузеров
 - [ ] Переменная, раз во сколько часов обновлять списки
 - [ ] Галочка, которая режет доступ к doh серверам
 
 Рефактор
+- [ ] Handle для sing-box
+- [ ] Handle для dnsmasq
 - [ ] Формирование json для sing-box на уровне jq, а не шаблонов
 - [ ] Unit тесты (BATS)
 - [ ] Интеграционые тесты бекенда (OpenWrt rootfs + BATS)
 - [ ] RU перевод
-- [ ] Handle для sing-box
-- [ ] Handle для dnsmasq
 
 Хз как сделать
-- [ ] Добавить label от конфига vless\ss\etc в luci. Хз как
+- [ ] Добавить label от конфига vless\ss\etc в luci.
 
 # Разработка
 Есть два варианта:

install.sh

@@ -2,9 +2,11 @@
 
 REPO="https://api.github.com/repos/itdoginfo/podkop/releases/latest"
 
+IS_SHOULD_RESTART_NETWORK=false
 DOWNLOAD_DIR="/tmp/podkop"
 mkdir -p "$DOWNLOAD_DIR"
 
+main() {
 wget -qO- "$REPO" | grep -o 'https://[^"]*\.ipk' | while read -r url; do
     filename=$(basename "$url")
     echo "Download $filename..."
@@ -24,60 +26,331 @@ else
     [ -f /etc/config/dhcp-opkg ] && cp /etc/config/dhcp /etc/config/dhcp-old && mv /etc/config/dhcp-opkg /etc/config/dhcp
 fi
 
-echo "What type of VPN or proxy will be used?"
-echo "1) VLESS, Shadowsocks (A sing-box will be installed)"
-echo "2) Wireguard"
-echo "3) AmneziaWG"
-echo "4) OpenVPN"
-echo "5) OpenConnect"
-echo "6) Skip this step"
+if [ -f "/etc/init.d/podkop" ]; then
+    printf "\033[32;1mPodkop is already installed. Just upgrade it? (y/n)\033[0m\n"
+    printf "\033[32;1my - Only upgrade podkop\033[0m\n"
+    printf "\033[32;1mn - Upgrade and install proxy or tunnels\033[0m\n"
 
-while true; do
-    read -r -p '' TUNNEL
-    case $TUNNEL in
+    while true; do
+        read -r -p '' UPDATE
+        case $UPDATE in
 
-    1)
-        opkg install sing-box
-        break
-        ;;
+        y)
+            echo "Upgraded podkop..."
+            break
+            ;;
 
-    2)
-        opkg install wireguard-tools luci-proto-wireguard luci-app-wireguard
-        printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n"
-        break
-        ;;
-
-    3)
-        echo "As long as it's not automated"
-        printf "\e[1;32mUse script from here https://github.com/Slava-Shchipunov/awg-openwrt\e[0m\n"
-        break
-        ;;
-
-    4)
-        opkg install opkg install openvpn-openssl luci-app-openvpn
-        printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openvpn-na-openwrt/\e[0m\n"
-        break
-        ;;
-
-    5)
-        opkg install opkg install openconnect luci-proto-openconnect
-        printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openconnect-na-openwrt/\e[0m\n"
-        break
-        ;;
-
-    6)
-        echo "Skip"
-        break
-        ;;
-
-    *)
-        echo "Choose from the following options"
-        ;;
+        n)
+            add_tunnel
+            break
+            ;;
     esac
-done
+    done
+else
+    echo "Installed podkop..."
+    add_tunnel
+fi
 
-echo "Installed podkop..."
 opkg install $DOWNLOAD_DIR/podkop*.ipk
 opkg install $DOWNLOAD_DIR/luci-app-podkop*.ipk
 
-rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk
+rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk
+
+if [ "$IS_SHOULD_RESTART_NETWORK" ]; then
+    printf "\033[32;1mRestart network\033[0m\n"
+    /etc/init.d/network restart
+fi
+}
+
+add_tunnel() {
+    echo "What type of VPN or proxy will be used? We also can automatically configure Wireguard and Amnezia WireGuard."
+    echo "1) VLESS, Shadowsocks (A sing-box will be installed)"
+    echo "2) Wireguard"
+    echo "3) AmneziaWG"
+    echo "4) OpenVPN"
+    echo "5) OpenConnect"
+    echo "6) Skip this step"
+
+    while true; do
+        read -r -p '' TUNNEL
+        case $TUNNEL in
+
+        1)
+            opkg install sing-box
+            break
+            ;;
+
+        2)
+            opkg install wireguard-tools luci-proto-wireguard luci-app-wireguard
+
+            printf "\033[32;1mDo you want to configure the wireguard interface? (y/n): \033[0m\n"
+            read IS_SHOULD_CONFIGURE_WG_INTERFACE
+
+            if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then
+                wg_awg_setup Wireguard
+            else
+            printf "\e[1;32mUse these instructions to manual configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n"
+            fi
+
+            break
+            ;;
+
+        3)
+            install_awg_packages
+
+            printf "\033[32;1mThere are no instructions for manual configure yet. Do you want to configure the amneziawg interface? (y/n): \033[0m\n"
+            read IS_SHOULD_CONFIGURE_WG_INTERFACE
+
+            if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then
+                wg_awg_setup AmneziaWG
+            fi
+
+            break
+            ;;
+
+        4)
+            opkg install opkg install openvpn-openssl luci-app-openvpn
+            printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openvpn-na-openwrt/\e[0m\n"
+            break
+            ;;
+
+        5)
+            opkg install opkg install openconnect luci-proto-openconnect
+            printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openconnect-na-openwrt/\e[0m\n"
+            break
+            ;;
+
+        6)
+            echo "Skip. Use this if you're installing an upgrade."
+            break
+            ;;
+
+        *)
+            echo "Choose from the following options"
+            ;;
+        esac
+    done
+}
+
+handler_network_restart() {
+    IS_SHOULD_RESTART_NETWORK=true
+}
+
+install_awg_packages() {
+    # Получение pkgarch с наибольшим приоритетом
+    PKGARCH=$(opkg print-architecture | awk 'BEGIN {max=0} {if ($3 > max) {max = $3; arch = $2}} END {print arch}')
+
+    TARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 1)
+    SUBTARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 2)
+    VERSION=$(ubus call system board | jsonfilter -e '@.release.version')
+    PKGPOSTFIX="_v${VERSION}_${PKGARCH}_${TARGET}_${SUBTARGET}.ipk"
+    BASE_URL="https://github.com/Slava-Shchipunov/awg-openwrt/releases/download/"
+
+    AWG_DIR="/tmp/amneziawg"
+    mkdir -p "$AWG_DIR"
+    
+    if opkg list-installed | grep -q kmod-amneziawg; then
+        echo "kmod-amneziawg already installed"
+    else
+        KMOD_AMNEZIAWG_FILENAME="kmod-amneziawg${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${KMOD_AMNEZIAWG_FILENAME}"
+        wget -O "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "kmod-amneziawg file downloaded successfully"
+        else
+            echo "Error downloading kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+            exit 1
+        fi
+        
+        opkg install "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "kmod-amneziawg file downloaded successfully"
+        else
+            echo "Error installing kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+            exit 1
+        fi
+    fi
+
+    if opkg list-installed | grep -q amneziawg-tools; then
+        echo "amneziawg-tools already installed"
+    else
+        AMNEZIAWG_TOOLS_FILENAME="amneziawg-tools${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${AMNEZIAWG_TOOLS_FILENAME}"
+        wget -O "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "amneziawg-tools file downloaded successfully"
+        else
+            echo "Error downloading amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+            exit 1
+        fi
+
+        opkg install "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "amneziawg-tools file downloaded successfully"
+        else
+            echo "Error installing amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+            exit 1
+        fi
+    fi
+    
+    if opkg list-installed | grep -q luci-app-amneziawg; then
+        echo "luci-app-amneziawg already installed"
+    else
+        LUCI_APP_AMNEZIAWG_FILENAME="luci-app-amneziawg${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${LUCI_APP_AMNEZIAWG_FILENAME}"
+        wget -O "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "luci-app-amneziawg file downloaded successfully"
+        else
+            echo "Error downloading luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+            exit 1
+        fi
+
+        opkg install "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "luci-app-amneziawg file downloaded successfully"
+        else
+            echo "Error installing luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+            exit 1
+        fi
+    fi
+
+    rm -rf "$AWG_DIR"
+}
+
+wg_awg_setup() {
+    PROTOCOL_NAME=$1
+    printf "\033[32;1mConfigure ${PROTOCOL_NAME}\033[0m\n"
+    if [ "$PROTOCOL_NAME" = 'Wireguard' ]; then
+        INTERFACE_NAME="wg0"
+        CONFIG_NAME="wireguard_wg0"
+        PROTO="wireguard"
+        ZONE_NAME="wg"
+    fi
+
+    if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then
+        INTERFACE_NAME="awg0"
+        CONFIG_NAME="amneziawg_awg0"
+        PROTO="amneziawg"
+        ZONE_NAME="awg"
+        
+        echo "Do you want to use AmneziaWG config or basic Wireguard config + automatic obfuscation?"
+        echo "1) AmneziaWG"
+        echo "2) Wireguard + automatic obfuscation"
+        read CONFIG_TYPE
+    fi
+
+    read -r -p "Enter the private key (from [Interface]):"$'\n' WG_PRIVATE_KEY_INT
+
+    while true; do
+        read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' WG_IP
+        if echo "$WG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then
+            break
+        else
+            echo "This IP is not valid. Please repeat"
+        fi
+    done
+
+    read -r -p "Enter the public key (from [Peer]):"$'\n' WG_PUBLIC_KEY_INT
+    read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' WG_PRESHARED_KEY_INT
+    read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' WG_ENDPOINT_INT
+
+    read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' WG_ENDPOINT_PORT_INT
+    WG_ENDPOINT_PORT_INT=${WG_ENDPOINT_PORT_INT:-51820}
+    if [ "$WG_ENDPOINT_PORT_INT" = '51820' ]; then
+        echo $WG_ENDPOINT_PORT_INT
+    fi
+
+    if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then
+        if [ "$CONFIG_TYPE" = '1' ]; then
+            read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC
+            read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN
+            read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX
+            read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1
+            read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2
+            read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1
+            read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2
+            read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3
+            read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4
+        elif [ "$CONFIG_TYPE" = '2' ]; then
+            #Default values to wg automatic obfuscation
+            AWG_JC=4
+            AWG_JMIN=40
+            AWG_JMAX=70
+            AWG_S1=0
+            AWG_S2=0
+            AWG_H1=1
+            AWG_H2=2
+            AWG_H3=3
+            AWG_H4=4
+        fi
+    fi
+    
+    uci set network.${INTERFACE_NAME}=interface
+    uci set network.${INTERFACE_NAME}.proto=$PROTO
+    uci set network.${INTERFACE_NAME}.private_key=$WG_PRIVATE_KEY_INT
+    uci set network.${INTERFACE_NAME}.listen_port='51821'
+    uci set network.${INTERFACE_NAME}.addresses=$WG_IP
+
+    if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then
+        uci set network.${INTERFACE_NAME}.awg_jc=$AWG_JC
+        uci set network.${INTERFACE_NAME}.awg_jmin=$AWG_JMIN
+        uci set network.${INTERFACE_NAME}.awg_jmax=$AWG_JMAX
+        uci set network.${INTERFACE_NAME}.awg_s1=$AWG_S1
+        uci set network.${INTERFACE_NAME}.awg_s2=$AWG_S2
+        uci set network.${INTERFACE_NAME}.awg_h1=$AWG_H1
+        uci set network.${INTERFACE_NAME}.awg_h2=$AWG_H2
+        uci set network.${INTERFACE_NAME}.awg_h3=$AWG_H3
+        uci set network.${INTERFACE_NAME}.awg_h4=$AWG_H4
+    fi
+
+    if ! uci show network | grep -q ${CONFIG_NAME}; then
+        uci add network ${CONFIG_NAME}
+    fi
+
+    uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME
+    uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client"
+    uci set network.@${CONFIG_NAME}[0].public_key=$WG_PUBLIC_KEY_INT
+    uci set network.@${CONFIG_NAME}[0].preshared_key=$WG_PRESHARED_KEY_INT
+    uci set network.@${CONFIG_NAME}[0].route_allowed_ips='0'
+    uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25'
+    uci set network.@${CONFIG_NAME}[0].endpoint_host=$WG_ENDPOINT_INT
+    uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0'
+    uci set network.@${CONFIG_NAME}[0].endpoint_port=$WG_ENDPOINT_PORT_INT
+    uci commit network
+
+    if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then
+        printf "\033[32;1mZone Create\033[0m\n"
+        uci add firewall zone
+        uci set firewall.@zone[-1].name=$ZONE_NAME
+        uci set firewall.@zone[-1].network=$INTERFACE_NAME
+        uci set firewall.@zone[-1].forward='REJECT'
+        uci set firewall.@zone[-1].output='ACCEPT'
+        uci set firewall.@zone[-1].input='REJECT'
+        uci set firewall.@zone[-1].masq='1'
+        uci set firewall.@zone[-1].mtu_fix='1'
+        uci set firewall.@zone[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then
+        printf "\033[32;1mConfigured forwarding\033[0m\n"
+        uci add firewall forwarding
+        uci set firewall.@forwarding[-1]=forwarding
+        uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan"
+        uci set firewall.@forwarding[-1].dest=${ZONE_NAME}
+        uci set firewall.@forwarding[-1].src='lan'
+        uci set firewall.@forwarding[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    handler_network_restart
+}
+
+main

luci-app-podkop/Makefile

@@ -4,7 +4,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=luci-app-podkop
-PKG_VERSION:=0.1.8
+PKG_VERSION:=0.2.1
 PKG_RELEASE:=1
 
 LUCI_TITLE:=LuCI podkop app

luci-app-podkop/htdocs/luci-static/resources/view/podkop/podkop.js

@@ -135,7 +135,7 @@ return view.extend({
         o.depends('exclude_from_ip_enabled', '1');
         o.rmempty = false;
 
-        o = s.taboption('main', form.Flag, 'yacd', _('Yacd enable'), _('http://openwrt.lan:9090:/ui'));
+        o = s.taboption('main', form.Flag, 'yacd', _('Yacd enable'), _('http://openwrt.lan:9090/ui'));
         o.default = '0';
         o.depends('mode', 'proxy');
         o.rmempty = false;
@@ -143,6 +143,11 @@ return view.extend({
         o = s.taboption('main', form.Flag, 'socks5', _('Mixed enable'), _('Browser port: 2080'));
         o.default = '0';
         o.depends('mode', 'proxy');
+        o.rmempty = false;
+    
+        o = s.taboption('main', form.Flag, 'exclude_ntp', _('Exclude NTP'), _('For issues with open connections sing-box'));
+        o.default = '0';
+        o.depends('mode', 'proxy');
         o.rmempty = false;  
 
         // Second section

podkop/Makefile

@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=podkop
-PKG_VERSION:=0.1.8
+PKG_VERSION:=0.2.1
 PKG_RELEASE:=1
 
 PKG_MAINTAINER:=ITDog <podkop@itdog.info>
@@ -28,20 +28,6 @@ endef
 define Build/Compile
 endef
 
-define Package/podkop/postinst
-#!/bin/sh
-
-if ! uci show ucitrack | grep -q 'podkop'; then
-    uci add ucitrack podkop
-    uci set ucitrack.@podkop[-1].init=podkop
-    uci commit ucitrack
-
-	/etc/init.d/ucitrack restart
-fi
-
-exit 0
-endef
-
 define Package/podkop/prerm
 #!/bin/sh
 

podkop/files/etc/config/podkop

@@ -1,27 +1,28 @@
 config main 'main'
 	option mode 'proxy'
-	option interface 'wg0'
+	option interface ''
 	option proxy_string ''
 	option domain_list_enabled '1'
 	option domain_list 'ru_inside'
 	option subnets_list_enabled '0'
-	list subnets 'twitter'
+	#list subnets 'twitter'
 	option custom_domains_list_enabled '0'
-	list custom_domains ''
+	#list custom_domains ''
 	option custom_download_domains_list_enabled '0'
-	list custom_download_domains ''
+	#list custom_download_domains ''
 	option custom_subnets_list_enabled '0'
-	list custom_subnets ''
+	#list custom_subnets ''
 	option custom_download_subnets_list_enabled '0'
-	list custom_download_subnets ''
+	#list custom_download_subnets ''
 	option all_traffic_from_ip_enabled '0'
-	list all_traffic_ip ''
+	#list all_traffic_ip ''
 	option delist_domains_enabled '0'
-	list delist_domains ''
+	#list delist_domains ''
 	option exclude_from_ip_enabled '0'
-	list exclude_traffic_ip ''
+	#list exclude_traffic_ip ''
 	option yacd '0'
 	option socks5 '0'
+	option exclude_ntp '0'
 
 config second 'second'
 	option second_enable '0'
@@ -29,8 +30,8 @@ config second 'second'
 	option interface 'wg1'
 	option proxy_string ''
 	option domain_list_enabled '0'
-	list domains 'youtube'
+	#list domains 'youtube'
 	option custom_domains_list_enabled '0'
-	list custom_domains 'ifconfig.io'
+	#list custom_domains 'ifconfig.io'
 	option custom_subnets_list_enabled '0'
-	list custom_subnets ''
+	#list custom_subnets ''

podkop/files/etc/init.d/podkop

@@ -1,6 +1,7 @@
 #!/bin/sh /etc/rc.common
 
 START=99
+USE_PROCD=1
 
 script=$(readlink "$initscript")
 NAME="$(basename ${script:-$initscript})"
@@ -8,13 +9,12 @@ config_load "$NAME"
 
 EXTRA_COMMANDS="list_update add_route_interface version"
 EXTRA_HELP="        list_update     Updating domain and subnet lists
-        version          Show version
         add_route_interface  Adding route for interface
         sing_box_config_vless For test vless string"
 
 cron_job="0 4 * * * /etc/init.d/podkop list_update"
 
-start() {
+start_service() {
     log "Start podkop"
 
     dnsmasqfull
@@ -187,9 +187,15 @@ start() {
         }]' /etc/sing-box/config.json >/tmp/sing-box-config-tmp.json && mv /tmp/sing-box-config-tmp.json /etc/sing-box/config.json
         /etc/init.d/sing-box restart
     fi
+
+    config_get_bool exclude_ntp "main" "exclude_ntp" "0"
+    if [ "$exclude_ntp" -eq 1 ]; then
+        log "NTP traffic exclude for proxy"
+        nft insert rule inet PodkopTable mangle udp dport 123 return
+    fi
 }
 
-stop() {
+stop_service() {
     log "Stopping the podkop"
     rm -f /tmp/dnsmasq.d/podkop*
     remove_cron_job
@@ -227,18 +233,18 @@ stop() {
     fi
 }
 
-restart() {
+restart_service() {
     stop
     start
 }
 
-reload() {
+reload_service() {
     stop
     start
 }
 
-version() {
-    echo VERSION_FROM_MAKEFILE
+service_triggers() {
+    procd_add_config_trigger "config.change" "$NAME" "$initscript" reload 'on_config_change'
 }
 
 log() {
@@ -390,7 +396,7 @@ add_set() {
 
     nft add table inet PodkopTable
     log "Create set $set_name"
-    nft add chain inet PodkopTable mangle { type filter hook prerouting priority mangle \; policy accept \;}
+    nft add chain inet PodkopTable mangle { type filter hook prerouting priority -150 \; policy accept \;}
     nft add set inet PodkopTable "$set_name" { type ipv4_addr\; flags interval\; auto-merge\; }
     config_get mode "$connect" "mode"
     case "$mode" in
@@ -405,8 +411,7 @@ add_set() {
         ;;
 
     "proxy")
-        #nft add chain inet PodkopTable mangle { type filter hook prerouting priority mangle \; }
-        #nft add chain inet PodkopTable proxy { type filter hook prerouting priority mangle \; }
+        nft add chain inet PodkopTable proxy { type filter hook prerouting priority -100 \; }
         if nft list table inet PodkopTable | grep -q "ip daddr @"$set_name" meta l4proto"; then
             log "Nft rule tproxy exists"
         else
@@ -414,13 +419,17 @@ add_set() {
             if [ "$connect" = "main" ]; then
                 nft add rule inet PodkopTable mangle ip daddr @"$set_name" meta l4proto tcp meta mark set 0x105 counter
                 nft add rule inet PodkopTable mangle ip daddr @"$set_name" meta l4proto udp meta mark set 0x105 counter
-                nft add rule inet PodkopTable mangle iifname "br-lan" meta mark 0x105 meta l4proto tcp tproxy ip to :1602 counter
-                nft add rule inet PodkopTable mangle iifname "br-lan" meta mark 0x105 meta l4proto udp tproxy ip to :1602 counter
+                if ! ( nft list table inet PodkopTable | grep -q "meta mark 0x00000105 meta l4proto tcp tproxy" ); then
+                    nft add rule inet PodkopTable proxy iifname "br-lan" meta mark 0x105 meta l4proto tcp tproxy ip to :1602 counter
+                    nft add rule inet PodkopTable proxy iifname "br-lan" meta mark 0x105 meta l4proto udp tproxy ip to :1602 counter
+                fi
             elif [ "$connect" = "second" ]; then
                 nft add rule inet PodkopTable mangle ip daddr @"$set_name" meta l4proto tcp meta mark set 0x106 counter
                 nft add rule inet PodkopTable mangle ip daddr @"$set_name" meta l4proto udp meta mark set 0x106 counter
-                nft add rule inet PodkopTable mangle iifname "br-lan" meta mark 0x106 meta l4proto tcp tproxy ip to :1603 counter
-                nft add rule inet PodkopTable mangle iifname "br-lan" meta mark 0x106 meta l4proto udp tproxy ip to :1603 counter
+                if ! ( nft list table inet PodkopTable | grep -q "meta mark 0x00000106 meta l4proto tcp tproxy" ); then
+                    nft add rule inet PodkopTable proxy iifname "br-lan" meta mark 0x106 meta l4proto tcp tproxy ip to :1603 counter
+                    nft add rule inet PodkopTable proxy iifname "br-lan" meta mark 0x106 meta l4proto udp tproxy ip to :1603 counter
+                fi
             fi
         fi
         ;;
@@ -435,9 +444,20 @@ add_set() {
 add_route_interface() {
     local interface="$1"
     local table="$2"
-    local retry_count=0
+    local retry_count_interface=0
+    local retry_count_route=0
     local max_retries=20
 
+    while ! ip link show "$interface" >/dev/null 2>&1; do
+        if (( attempt == max_retries )); then
+            log "Interface "$interface" undetected after $retry_count_interface attempts. Exit"
+            exit 1
+        fi
+        log "Attempt $retry_count_interface: Interface "$interface" not found, retrying in 3 seconds..."
+        retry_count_interface=$(( retry_count_interface + 1 ))
+        sleep 3
+    done
+
     if ! ip link show "$interface" >/dev/null 2>&1; then
         log "Interface "$interface" does not exist, not possible to create a route"
         exit 1
@@ -449,11 +469,11 @@ add_route_interface() {
     fi
 
     log "Added route for "$interface""
-    while [ $retry_count -lt $max_retries ]; do
+    while [ $retry_count_route -lt $max_retries ]; do
         if ip route add table $table default dev "$interface" 2>&1 | grep -q "Network is down"; then
-            log "Error: Network is down. Let's try again in 3 seconds"
+            log "Attempt $retry_count_route: Interface "$interface" is down, retrying in 3 seconds..."
             sleep 3
-            retry_count=$((retry_count + 1))
+            retry_count_route=$((retry_count_route + 1))
         else
             log "Route for "$interface" added"
             return 0
@@ -645,14 +665,36 @@ list_custom_subnets_create() {
 list_all_traffic_from_ip() {
     local ip="$1"
     if ! nft list chain inet PodkopTable mangle | grep -q "ip saddr $ip"; then
-        nft insert rule inet PodkopTable mangle ip saddr $ip meta mark set 0x105 counter
+        config_get mode "main" "mode" "0"
+        if [ "$mode" = "vpn" ]; then
+            nft insert rule inet PodkopTable mangle ip saddr $ip meta mark set 0x105 counter
+        elif [ "$mode" = "proxy" ]; then
+            nft add set inet PodkopTable localv4 { type ipv4_addr\; flags interval\; }
+            nft add element inet PodkopTable localv4 { \
+                0.0.0.0/8, \
+                10.0.0.0/8, \
+                127.0.0.0/8, \
+                169.254.0.0/16, \
+                172.16.0.0/12, \
+                192.0.0.0/24, \
+                192.0.2.0/24, \
+                192.88.99.0/24, \
+                192.168.0.0/16, \
+                198.18.0.0/15, \
+                198.51.100.0/24, \
+                203.0.113.0/24, \
+                224.0.0.0/4, \
+                240.0.0.0-255.255.255.255 }
+            nft insert rule inet PodkopTable mangle ip saddr $ip meta l4proto { tcp, udp } meta mark set 0x105 counter
+            nft insert rule inet PodkopTable mangle ip saddr $ip ip daddr @localv4 return
+        fi
     fi
 }
 
 list_exclude_traffic_from_ip() {
     local ip="$1"
     if ! nft list chain inet PodkopTable mangle | grep -q "ip saddr $ip"; then
-        nft insert rule inet PodkopTable mangle ip saddr $ip meta mark set 0x0 counter
+        nft insert rule inet PodkopTable mangle ip saddr $ip return
     fi
 }
 
@@ -911,4 +953,4 @@ sing_box_config_check() {
         log "Sing-box configuration is invalid"
         exit 1
     fi
-}
+}