Merge pull request #1 from Slava-Shchipunov/main

Добавил автоматическую настройку туннелей awmneziawg и wg
2025-12-24 16:38:24 +03:00 · 2024-11-05 11:43:13 +03:00
parent f48670018f ee8bef67ee
commit d9c1f2a95c
2 changed files with 298 additions and 46 deletions
--- a/README.md
+++ b/README.md
@@ -20,6 +20,10 @@ sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/domain-routing-openwr
 sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/podkop/refs/heads/main/install.sh)
 ```

+Скрипт также предложит выбрать, какой туннель будет использоваться. Для выбранного туннеля будут установлены нужные пакеты, а для Wireguard и AmneziaWG также будет предложена автоматическая настройка - прямо в консоли скрипт запросит данные конфига. Для AmneziaWG можно также выбрать вариант с использованием конфига обычного Wireguard и автоматической обфускацией до AmneziaWG.
+
+Для AmneziaWG скрипт проверяет наличие пакетов под вашу платформу в [стороннем репозитории](https://github.com/Slava-Shchipunov/awg-openwrt/releases), так как в официальном репозитории OpenWRT они отсутствуют, и автоматически их устанавливает.
+
 ## Вручную
 Сделать `opkg update`, чтоб установились зависимости.
 Скачать пакеты `podkop_*.ipk` и `luci-app-podkop_*.ipk` из релиза. `opkg install` сначала первый, потом второй.
@@ -94,8 +98,8 @@ opkg update && opkg install sing-box
 - [ ] IPv6
 - [ ] Придумать автонастройку DNS через stubby итд. Как лучше это реализовать.
 - [ ] Удаление подсетей CF из domain sets раз в N часов
- [ ] Автонастройка wireguard по примеру getdomains
- [ ] Автонастройка awg по примеру getdomains
+- [x] Автонастройка wireguard по примеру getdomains
+- [x] Автонастройка awg по примеру getdomains

 Wiki
 - [ ] Тема
--- a/install.sh
+++ b/install.sh
@@ -24,60 +24,308 @@ else
    [ -f /etc/config/dhcp-opkg ] && cp /etc/config/dhcp /etc/config/dhcp-old && mv /etc/config/dhcp-opkg /etc/config/dhcp
 fi

-echo "What type of VPN or proxy will be used?"
-echo "1) VLESS, Shadowsocks (A sing-box will be installed)"
-echo "2) Wireguard"
-echo "3) AmneziaWG"
-echo "4) OpenVPN"
-echo "5) OpenConnect"
-echo "6) Skip this step"
+IS_SHOULD_RESTART_NETWORK=false

-while true; do
-    read -r -p '' TUNNEL
-    case $TUNNEL in
+handler_network_restart() {
+    IS_SHOULD_RESTART_NETWORK=true
+}

-    1)
-        opkg install sing-box
-        break
-        ;;
+install_awg_packages() {
+    # Получение pkgarch с наибольшим приоритетом
+    PKGARCH=$(opkg print-architecture | awk 'BEGIN {max=0} {if ($3 > max) {max = $3; arch = $2}} END {print arch}')

-    2)
-        opkg install wireguard-tools luci-proto-wireguard luci-app-wireguard
-        printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n"
-        break
-        ;;
+    TARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 1)
+    SUBTARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 2)
+    VERSION=$(ubus call system board | jsonfilter -e '@.release.version')
+    PKGPOSTFIX="_v${VERSION}_${PKGARCH}_${TARGET}_${SUBTARGET}.ipk"
+    BASE_URL="https://github.com/Slava-Shchipunov/awg-openwrt/releases/download/"

-    3)
-        echo "As long as it's not automated"
-        printf "\e[1;32mUse script from here https://github.com/Slava-Shchipunov/awg-openwrt\e[0m\n"
-        break
-        ;;
+    AWG_DIR="/tmp/amneziawg"
+    mkdir -p "$AWG_DIR"
+    
+    if opkg list-installed | grep -q kmod-amneziawg; then
+        echo "kmod-amneziawg already installed"
+    else
+        KMOD_AMNEZIAWG_FILENAME="kmod-amneziawg${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${KMOD_AMNEZIAWG_FILENAME}"
+        wget -O "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"

-    4)
-        opkg install opkg install openvpn-openssl luci-app-openvpn
-        printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openvpn-na-openwrt/\e[0m\n"
-        break
-        ;;
+        if [ $? -eq 0 ]; then
+            echo "kmod-amneziawg file downloaded successfully"
+        else
+            echo "Error downloading kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+            exit 1
+        fi
+        
+        opkg install "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME"

-    5)
-        opkg install opkg install openconnect luci-proto-openconnect
-        printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openconnect-na-openwrt/\e[0m\n"
-        break
-        ;;
+        if [ $? -eq 0 ]; then
+            echo "kmod-amneziawg file downloaded successfully"
+        else
+            echo "Error installing kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+            exit 1
+        fi
+    fi

-    6)
-        echo "Skip. Use this if you're installing an upgrade."
-        break
-        ;;
+    if opkg list-installed | grep -q amneziawg-tools; then
+        echo "amneziawg-tools already installed"
+    else
+        AMNEZIAWG_TOOLS_FILENAME="amneziawg-tools${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${AMNEZIAWG_TOOLS_FILENAME}"
+        wget -O "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" "$DOWNLOAD_URL"

-    *)
-        echo "Choose from the following options"
-        ;;
-    esac
-done
+        if [ $? -eq 0 ]; then
+            echo "amneziawg-tools file downloaded successfully"
+        else
+            echo "Error downloading amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+            exit 1
+        fi
+
+        opkg install "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "amneziawg-tools file downloaded successfully"
+        else
+            echo "Error installing amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+            exit 1
+        fi
+    fi
+    
+    if opkg list-installed | grep -q luci-app-amneziawg; then
+        echo "luci-app-amneziawg already installed"
+    else
+        LUCI_APP_AMNEZIAWG_FILENAME="luci-app-amneziawg${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${LUCI_APP_AMNEZIAWG_FILENAME}"
+        wget -O "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "luci-app-amneziawg file downloaded successfully"
+        else
+            echo "Error downloading luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+            exit 1
+        fi
+
+        opkg install "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "luci-app-amneziawg file downloaded successfully"
+        else
+            echo "Error installing luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+            exit 1
+        fi
+    fi
+
+    rm -rf "$AWG_DIR"
+}
+
+wg_awg_setup() {
+    PROTOCOL_NAME=$1
+    printf "\033[32;1mConfigure ${PROTOCOL_NAME}\033[0m\n"
+    if [ "$PROTOCOL_NAME" = 'Wireguard' ]; then
+        INTERFACE_NAME="wg0"
+        CONFIG_NAME="wireguard_wg0"
+        PROTO="wireguard"
+        ZONE_NAME="wg"
+    fi
+
+    if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then
+        INTERFACE_NAME="awg0"
+        CONFIG_NAME="amneziawg_awg0"
+        PROTO="amneziawg"
+        ZONE_NAME="awg"
+        
+        echo "Do you want to use AmneziaWG config or basic Wireguard config + automatic obfuscation?"
+        echo "1) AmneziaWG"
+        echo "2) Wireguard + automatic obfuscation"
+        read CONFIG_TYPE
+    fi
+
+    read -r -p "Enter the private key (from [Interface]):"$'\n' WG_PRIVATE_KEY_INT
+
+    while true; do
+        read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' WG_IP
+        if echo "$WG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then
+            break
+        else
+            echo "This IP is not valid. Please repeat"
+        fi
+    done
+
+    read -r -p "Enter the public key (from [Peer]):"$'\n' WG_PUBLIC_KEY_INT
+    read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' WG_PRESHARED_KEY_INT
+    read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' WG_ENDPOINT_INT
+
+    read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' WG_ENDPOINT_PORT_INT
+    WG_ENDPOINT_PORT_INT=${WG_ENDPOINT_PORT_INT:-51820}
+    if [ "$WG_ENDPOINT_PORT_INT" = '51820' ]; then
+        echo $WG_ENDPOINT_PORT_INT
+    fi
+
+    if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then
+        if [ "$CONFIG_TYPE" = '1' ]; then
+            read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC
+            read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN
+            read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX
+            read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1
+            read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2
+            read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1
+            read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2
+            read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3
+            read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4
+        elif [ "$CONFIG_TYPE" = '2' ]; then
+            #Default values to wg automatic obfuscation
+            AWG_JC=4
+            AWG_JMIN=40
+            AWG_JMAX=70
+            AWG_S1=0
+            AWG_S2=0
+            AWG_H1=1
+            AWG_H2=2
+            AWG_H3=3
+            AWG_H4=4
+        fi
+    fi
+    
+    uci set network.${INTERFACE_NAME}=interface
+    uci set network.${INTERFACE_NAME}.proto=$PROTO
+    uci set network.${INTERFACE_NAME}.private_key=$WG_PRIVATE_KEY_INT
+    uci set network.${INTERFACE_NAME}.listen_port='51821'
+    uci set network.${INTERFACE_NAME}.addresses=$WG_IP
+
+    if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then
+        uci set network.${INTERFACE_NAME}.awg_jc=$AWG_JC
+        uci set network.${INTERFACE_NAME}.awg_jmin=$AWG_JMIN
+        uci set network.${INTERFACE_NAME}.awg_jmax=$AWG_JMAX
+        uci set network.${INTERFACE_NAME}.awg_s1=$AWG_S1
+        uci set network.${INTERFACE_NAME}.awg_s2=$AWG_S2
+        uci set network.${INTERFACE_NAME}.awg_h1=$AWG_H1
+        uci set network.${INTERFACE_NAME}.awg_h2=$AWG_H2
+        uci set network.${INTERFACE_NAME}.awg_h3=$AWG_H3
+        uci set network.${INTERFACE_NAME}.awg_h4=$AWG_H4
+    fi
+
+    if ! uci show network | grep -q ${CONFIG_NAME}; then
+        uci add network ${CONFIG_NAME}
+    fi
+
+    uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME
+    uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client"
+    uci set network.@${CONFIG_NAME}[0].public_key=$WG_PUBLIC_KEY_INT
+    uci set network.@${CONFIG_NAME}[0].preshared_key=$WG_PRESHARED_KEY_INT
+    uci set network.@${CONFIG_NAME}[0].route_allowed_ips='0'
+    uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25'
+    uci set network.@${CONFIG_NAME}[0].endpoint_host=$WG_ENDPOINT_INT
+    uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0'
+    uci set network.@${CONFIG_NAME}[0].endpoint_port=$WG_ENDPOINT_PORT_INT
+    uci commit network
+
+    if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then
+        printf "\033[32;1mZone Create\033[0m\n"
+        uci add firewall zone
+        uci set firewall.@zone[-1].name=$ZONE_NAME
+        uci set firewall.@zone[-1].network=$INTERFACE_NAME
+        uci set firewall.@zone[-1].forward='REJECT'
+        uci set firewall.@zone[-1].output='ACCEPT'
+        uci set firewall.@zone[-1].input='REJECT'
+        uci set firewall.@zone[-1].masq='1'
+        uci set firewall.@zone[-1].mtu_fix='1'
+        uci set firewall.@zone[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then
+        printf "\033[32;1mConfigured forwarding\033[0m\n"
+        uci add firewall forwarding
+        uci set firewall.@forwarding[-1]=forwarding
+        uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan"
+        uci set firewall.@forwarding[-1].dest=${ZONE_NAME}
+        uci set firewall.@forwarding[-1].src='lan'
+        uci set firewall.@forwarding[-1].family='ipv4'
+        uci commit firewall
+    fi
+
+    handler_network_restart
+}
+
+add_tunnel() {
+    echo "What type of VPN or proxy will be used? We also can automatically configure Wireguard and Amnezia WireGuard."
+    echo "1) VLESS, Shadowsocks (A sing-box will be installed)"
+    echo "2) Wireguard"
+    echo "3) AmneziaWG"
+    echo "4) OpenVPN"
+    echo "5) OpenConnect"
+    echo "6) Skip this step"
+
+    while true; do
+        read -r -p '' TUNNEL
+        case $TUNNEL in
+
+        1)
+            opkg install sing-box
+            break
+            ;;
+
+        2)
+            opkg install wireguard-tools luci-proto-wireguard luci-app-wireguard
+
+            printf "\033[32;1mDo you want to configure the wireguard interface? (y/n): \033[0m\n"
+            read IS_SHOULD_CONFIGURE_WG_INTERFACE
+
+            if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then
+                wg_awg_setup Wireguard
+            else
+            printf "\e[1;32mUse these instructions to manual configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n"
+            fi
+
+            break
+            ;;
+
+        3)
+            install_awg_packages
+
+            printf "\033[32;1mThere are no instructions for manual configure yet. Do you want to configure the amneziawg interface? (y/n): \033[0m\n"
+            read IS_SHOULD_CONFIGURE_WG_INTERFACE
+
+            if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then
+                wg_awg_setup AmneziaWG
+            fi
+
+            break
+            ;;
+
+        4)
+            opkg install opkg install openvpn-openssl luci-app-openvpn
+            printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openvpn-na-openwrt/\e[0m\n"
+            break
+            ;;
+
+        5)
+            opkg install opkg install openconnect luci-proto-openconnect
+            printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openconnect-na-openwrt/\e[0m\n"
+            break
+            ;;
+
+        6)
+            echo "Skip. Use this if you're installing an upgrade."
+            break
+            ;;
+
+        *)
+            echo "Choose from the following options"
+            ;;
+        esac
+    done
+}
+
+add_tunnel

 echo "Installed podkop..."
 opkg install $DOWNLOAD_DIR/podkop*.ipk
 opkg install $DOWNLOAD_DIR/luci-app-podkop*.ipk

-rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk
+rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk
+
+if [ "$IS_SHOULD_RESTART_NETWORK" ]; then
+    printf "\033[32;1mRestart network\033[0m\n"
+    /etc/init.d/network restart
+fi