diff --git a/README.md b/README.md index 9e2366e..221a4fa 100644 --- a/README.md +++ b/README.md @@ -20,6 +20,10 @@ sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/domain-routing-openwr sh <(wget -O - https://raw.githubusercontent.com/itdoginfo/podkop/refs/heads/main/install.sh) ``` +Скрипт также предложит выбрать, какой туннель будет использоваться. Для выбранного туннеля будут установлены нужные пакеты, а для Wireguard и AmneziaWG также будет предложена автоматическая настройка - прямо в консоли скрипт запросит данные конфига. Для AmneziaWG можно также выбрать вариант с использованием конфига обычного Wireguard и автоматической обфускацией до AmneziaWG. + +Для AmneziaWG скрипт проверяет наличие пакетов под вашу платформу в [стороннем репозитории](https://github.com/Slava-Shchipunov/awg-openwrt/releases), так как в официальном репозитории OpenWRT они отсутствуют, и автоматически их устанавливает. + ## Вручную Сделать `opkg update`, чтоб установились зависимости. Скачать пакеты `podkop_*.ipk` и `luci-app-podkop_*.ipk` из релиза. `opkg install` сначала первый, потом второй. @@ -94,8 +98,8 @@ opkg update && opkg install sing-box - [ ] IPv6 - [ ] Придумать автонастройку DNS через stubby итд. Как лучше это реализовать. - [ ] Удаление подсетей CF из domain sets раз в N часов -- [ ] Автонастройка wireguard по примеру getdomains -- [ ] Автонастройка awg по примеру getdomains +- [x] Автонастройка wireguard по примеру getdomains +- [x] Автонастройка awg по примеру getdomains Wiki - [ ] Тема diff --git a/install.sh b/install.sh index 22fce74..adc93d8 100755 --- a/install.sh +++ b/install.sh @@ -24,60 +24,308 @@ else [ -f /etc/config/dhcp-opkg ] && cp /etc/config/dhcp /etc/config/dhcp-old && mv /etc/config/dhcp-opkg /etc/config/dhcp fi -echo "What type of VPN or proxy will be used?" -echo "1) VLESS, Shadowsocks (A sing-box will be installed)" -echo "2) Wireguard" -echo "3) AmneziaWG" -echo "4) OpenVPN" -echo "5) OpenConnect" -echo "6) Skip this step" +IS_SHOULD_RESTART_NETWORK=false -while true; do - read -r -p '' TUNNEL - case $TUNNEL in +handler_network_restart() { + IS_SHOULD_RESTART_NETWORK=true +} - 1) - opkg install sing-box - break - ;; +install_awg_packages() { + # Получение pkgarch с наибольшим приоритетом + PKGARCH=$(opkg print-architecture | awk 'BEGIN {max=0} {if ($3 > max) {max = $3; arch = $2}} END {print arch}') - 2) - opkg install wireguard-tools luci-proto-wireguard luci-app-wireguard - printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n" - break - ;; + TARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 1) + SUBTARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 2) + VERSION=$(ubus call system board | jsonfilter -e '@.release.version') + PKGPOSTFIX="_v${VERSION}_${PKGARCH}_${TARGET}_${SUBTARGET}.ipk" + BASE_URL="https://github.com/Slava-Shchipunov/awg-openwrt/releases/download/" - 3) - echo "As long as it's not automated" - printf "\e[1;32mUse script from here https://github.com/Slava-Shchipunov/awg-openwrt\e[0m\n" - break - ;; + AWG_DIR="/tmp/amneziawg" + mkdir -p "$AWG_DIR" + + if opkg list-installed | grep -q kmod-amneziawg; then + echo "kmod-amneziawg already installed" + else + KMOD_AMNEZIAWG_FILENAME="kmod-amneziawg${PKGPOSTFIX}" + DOWNLOAD_URL="${BASE_URL}v${VERSION}/${KMOD_AMNEZIAWG_FILENAME}" + wget -O "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL" - 4) - opkg install opkg install openvpn-openssl luci-app-openvpn - printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openvpn-na-openwrt/\e[0m\n" - break - ;; + if [ $? -eq 0 ]; then + echo "kmod-amneziawg file downloaded successfully" + else + echo "Error downloading kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again" + exit 1 + fi + + opkg install "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" - 5) - opkg install opkg install openconnect luci-proto-openconnect - printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openconnect-na-openwrt/\e[0m\n" - break - ;; + if [ $? -eq 0 ]; then + echo "kmod-amneziawg file downloaded successfully" + else + echo "Error installing kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again" + exit 1 + fi + fi - 6) - echo "Skip. Use this if you're installing an upgrade." - break - ;; + if opkg list-installed | grep -q amneziawg-tools; then + echo "amneziawg-tools already installed" + else + AMNEZIAWG_TOOLS_FILENAME="amneziawg-tools${PKGPOSTFIX}" + DOWNLOAD_URL="${BASE_URL}v${VERSION}/${AMNEZIAWG_TOOLS_FILENAME}" + wget -O "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" "$DOWNLOAD_URL" - *) - echo "Choose from the following options" - ;; - esac -done + if [ $? -eq 0 ]; then + echo "amneziawg-tools file downloaded successfully" + else + echo "Error downloading amneziawg-tools. Please, install amneziawg-tools manually and run the script again" + exit 1 + fi + + opkg install "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" + + if [ $? -eq 0 ]; then + echo "amneziawg-tools file downloaded successfully" + else + echo "Error installing amneziawg-tools. Please, install amneziawg-tools manually and run the script again" + exit 1 + fi + fi + + if opkg list-installed | grep -q luci-app-amneziawg; then + echo "luci-app-amneziawg already installed" + else + LUCI_APP_AMNEZIAWG_FILENAME="luci-app-amneziawg${PKGPOSTFIX}" + DOWNLOAD_URL="${BASE_URL}v${VERSION}/${LUCI_APP_AMNEZIAWG_FILENAME}" + wget -O "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL" + + if [ $? -eq 0 ]; then + echo "luci-app-amneziawg file downloaded successfully" + else + echo "Error downloading luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again" + exit 1 + fi + + opkg install "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" + + if [ $? -eq 0 ]; then + echo "luci-app-amneziawg file downloaded successfully" + else + echo "Error installing luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again" + exit 1 + fi + fi + + rm -rf "$AWG_DIR" +} + +wg_awg_setup() { + PROTOCOL_NAME=$1 + printf "\033[32;1mConfigure ${PROTOCOL_NAME}\033[0m\n" + if [ "$PROTOCOL_NAME" = 'Wireguard' ]; then + INTERFACE_NAME="wg0" + CONFIG_NAME="wireguard_wg0" + PROTO="wireguard" + ZONE_NAME="wg" + fi + + if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then + INTERFACE_NAME="awg0" + CONFIG_NAME="amneziawg_awg0" + PROTO="amneziawg" + ZONE_NAME="awg" + + echo "Do you want to use AmneziaWG config or basic Wireguard config + automatic obfuscation?" + echo "1) AmneziaWG" + echo "2) Wireguard + automatic obfuscation" + read CONFIG_TYPE + fi + + read -r -p "Enter the private key (from [Interface]):"$'\n' WG_PRIVATE_KEY_INT + + while true; do + read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' WG_IP + if echo "$WG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then + break + else + echo "This IP is not valid. Please repeat" + fi + done + + read -r -p "Enter the public key (from [Peer]):"$'\n' WG_PUBLIC_KEY_INT + read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' WG_PRESHARED_KEY_INT + read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' WG_ENDPOINT_INT + + read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' WG_ENDPOINT_PORT_INT + WG_ENDPOINT_PORT_INT=${WG_ENDPOINT_PORT_INT:-51820} + if [ "$WG_ENDPOINT_PORT_INT" = '51820' ]; then + echo $WG_ENDPOINT_PORT_INT + fi + + if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then + if [ "$CONFIG_TYPE" = '1' ]; then + read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC + read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN + read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX + read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1 + read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2 + read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1 + read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2 + read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3 + read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4 + elif [ "$CONFIG_TYPE" = '2' ]; then + #Default values to wg automatic obfuscation + AWG_JC=4 + AWG_JMIN=40 + AWG_JMAX=70 + AWG_S1=0 + AWG_S2=0 + AWG_H1=1 + AWG_H2=2 + AWG_H3=3 + AWG_H4=4 + fi + fi + + uci set network.${INTERFACE_NAME}=interface + uci set network.${INTERFACE_NAME}.proto=$PROTO + uci set network.${INTERFACE_NAME}.private_key=$WG_PRIVATE_KEY_INT + uci set network.${INTERFACE_NAME}.listen_port='51821' + uci set network.${INTERFACE_NAME}.addresses=$WG_IP + + if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then + uci set network.${INTERFACE_NAME}.awg_jc=$AWG_JC + uci set network.${INTERFACE_NAME}.awg_jmin=$AWG_JMIN + uci set network.${INTERFACE_NAME}.awg_jmax=$AWG_JMAX + uci set network.${INTERFACE_NAME}.awg_s1=$AWG_S1 + uci set network.${INTERFACE_NAME}.awg_s2=$AWG_S2 + uci set network.${INTERFACE_NAME}.awg_h1=$AWG_H1 + uci set network.${INTERFACE_NAME}.awg_h2=$AWG_H2 + uci set network.${INTERFACE_NAME}.awg_h3=$AWG_H3 + uci set network.${INTERFACE_NAME}.awg_h4=$AWG_H4 + fi + + if ! uci show network | grep -q ${CONFIG_NAME}; then + uci add network ${CONFIG_NAME} + fi + + uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME + uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client" + uci set network.@${CONFIG_NAME}[0].public_key=$WG_PUBLIC_KEY_INT + uci set network.@${CONFIG_NAME}[0].preshared_key=$WG_PRESHARED_KEY_INT + uci set network.@${CONFIG_NAME}[0].route_allowed_ips='0' + uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25' + uci set network.@${CONFIG_NAME}[0].endpoint_host=$WG_ENDPOINT_INT + uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0' + uci set network.@${CONFIG_NAME}[0].endpoint_port=$WG_ENDPOINT_PORT_INT + uci commit network + + if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then + printf "\033[32;1mZone Create\033[0m\n" + uci add firewall zone + uci set firewall.@zone[-1].name=$ZONE_NAME + uci set firewall.@zone[-1].network=$INTERFACE_NAME + uci set firewall.@zone[-1].forward='REJECT' + uci set firewall.@zone[-1].output='ACCEPT' + uci set firewall.@zone[-1].input='REJECT' + uci set firewall.@zone[-1].masq='1' + uci set firewall.@zone[-1].mtu_fix='1' + uci set firewall.@zone[-1].family='ipv4' + uci commit firewall + fi + + if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then + printf "\033[32;1mConfigured forwarding\033[0m\n" + uci add firewall forwarding + uci set firewall.@forwarding[-1]=forwarding + uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan" + uci set firewall.@forwarding[-1].dest=${ZONE_NAME} + uci set firewall.@forwarding[-1].src='lan' + uci set firewall.@forwarding[-1].family='ipv4' + uci commit firewall + fi + + handler_network_restart +} + +add_tunnel() { + echo "What type of VPN or proxy will be used? We also can automatically configure Wireguard and Amnezia WireGuard." + echo "1) VLESS, Shadowsocks (A sing-box will be installed)" + echo "2) Wireguard" + echo "3) AmneziaWG" + echo "4) OpenVPN" + echo "5) OpenConnect" + echo "6) Skip this step" + + while true; do + read -r -p '' TUNNEL + case $TUNNEL in + + 1) + opkg install sing-box + break + ;; + + 2) + opkg install wireguard-tools luci-proto-wireguard luci-app-wireguard + + printf "\033[32;1mDo you want to configure the wireguard interface? (y/n): \033[0m\n" + read IS_SHOULD_CONFIGURE_WG_INTERFACE + + if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then + wg_awg_setup Wireguard + else + printf "\e[1;32mUse these instructions to manual configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n" + fi + + break + ;; + + 3) + install_awg_packages + + printf "\033[32;1mThere are no instructions for manual configure yet. Do you want to configure the amneziawg interface? (y/n): \033[0m\n" + read IS_SHOULD_CONFIGURE_WG_INTERFACE + + if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then + wg_awg_setup AmneziaWG + fi + + break + ;; + + 4) + opkg install opkg install openvpn-openssl luci-app-openvpn + printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openvpn-na-openwrt/\e[0m\n" + break + ;; + + 5) + opkg install opkg install openconnect luci-proto-openconnect + printf "\e[1;32mUse these instructions to configure https://itdog.info/nastrojka-klienta-openconnect-na-openwrt/\e[0m\n" + break + ;; + + 6) + echo "Skip. Use this if you're installing an upgrade." + break + ;; + + *) + echo "Choose from the following options" + ;; + esac + done +} + +add_tunnel echo "Installed podkop..." opkg install $DOWNLOAD_DIR/podkop*.ipk opkg install $DOWNLOAD_DIR/luci-app-podkop*.ipk -rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk \ No newline at end of file +rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk + +if [ "$IS_SHOULD_RESTART_NETWORK" ]; then + printf "\033[32;1mRestart network\033[0m\n" + /etc/init.d/network restart +fi