Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-06 11:36:53 +03:00
Code Issues Packages Projects Releases Wiki Activity

.

Browse Source
This commit is contained in:
CaCO3
2023-02-21 21:55:19 +01:00
parent 8eacff05e5
commit f1edaafb34
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
docs/initial-setup.md
View File

@@ -7,10 +7,10 @@ After setting up the device (firmware, SD card, WLAN) the device will connect to
With the buttons on the top you can navigate through 5 steps which guide you through the necessary setup:
1. Create the [Reference Image](Reference-Image.md). It is the base for the position referencing and the identification of the digits and counters.
1. Define two unique [References](Alignment.md). It is used to align the individual camera images and identify the absolut positions.
1. Define the [Digital ROIs](ROI-Configuration.md) to be recognized. (Only required in case your meter has analoge pointers).
1. Define the [Analog ROIs](ROI-Configuration.md) to be identified</li>
1. [General Settings](Configuration.md). Most settings can be used with default value at the beginning.
1. Define two unique [Reference Marks](Alignment.md). They is used to align the individual camera images and identify the absolut positions.
1. Define [ROIs](ROI-Configuration.md) for the Digits. They will be used to digitize the digit part of your meter. If your meter has no digits, this step can be skipped.
1. Define [ROIs](ROI-Configuration.md) for the Analog Counters. (Only required in case your meter has analoge counters)</li>
1. [General Settings](Configuration.md). Further configuration of your device.
All settings can be accessed also later in the normal operation mode.