Bump version to v72.20260114

dwc: Rewrite code and restore US.AWS-01 (kaltura.com)
comfunc: Fix recreating crontab log cleaning task on restart
2026-01-27 21:00:37 +03:00 · 2026-01-14 22:02:51 +03:00 · 2026-01-14 22:01:23 +03:00 · 2026-01-13 21:41:33 +03:00 · 2026-01-13 21:33:24 +03:00 · 2026-01-13 17:02:29 +03:00
47 changed files with 1495 additions and 765 deletions
--- a/.github/ISSUE_TEMPLATE/bug_report_en.yml
+++ b/.github/ISSUE_TEMPLATE/bug_report_en.yml
@@ -0,0 +1,80 @@
+---
+name: 🐛 Bug Report
+description: Report a reproducible bug
+title: "[BUG] "
+labels: ["bug"]
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for reporting a bug! Please fill out the form below.
+        
+        Before sending, please:
+        - Check [existing issues](https://github.com/remittor/zapret-openwrt/issues)
+        - Read [documentation](https://github.com/remittor/zapret-openwrt/wiki/)
+
+  - type: textarea
+    id: description
+    attributes:
+      label: 📝 Bug description
+      description: A clear and concise description of what is not working
+      placeholder: A clear and concise description of the bug
+    validations:
+      required: true
+
+  - type: textarea
+    id: reproduction
+    attributes:
+      label: Steps to reproduce
+      description: Steps to reproduce the problem. If you're following a manual, please include a link to it.
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected
+    attributes:
+      label: ✅ Expected behavior
+      description: A clear and concise description of what was to happen
+      placeholder: Describe the expected behavior
+    validations:
+      required: true
+
+  - type: textarea
+    id: environment
+    attributes:
+      label: 🖥️ System Information
+      description: |
+        Information about your system (fill in all that used)
+      value: |
+        - **OpenWrt version**: 
+        - **Zapret version**: 
+        - **Router model**: 
+      render: markdown
+    validations:
+      required: true
+
+  - type: textarea
+    id: strategy
+    attributes:
+      label: ✅ The NFQWS strategy used
+      description: All parameters of the NFQWS strategy, or its name
+      placeholder: If the problem is caused by the NFQWS strategy
+
+  - type: textarea
+    id: config
+    attributes:
+      label: ⚙️ System Configurations
+      description: |
+        Relevant parts of the configuration (remove sensitive information!)
+      placeholder: |
+        For example:
+        - Contents of /etc/config/zapret
+        - Firewall configuration (Flow offloading, etc.)
+        - Additional configurations required for wireless/network/dhcp, etc.
+      render: shell
--- a/.github/ISSUE_TEMPLATE/bug_report_ru.yml
+++ b/.github/ISSUE_TEMPLATE/bug_report_ru.yml
@@ -0,0 +1,80 @@
+---
+name: 🐛 Сообщение об ошибке
+description: Сообщить об ошибке
+title: "[BUG] "
+labels: ["bug"]
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Спасибо за создание отчета об ошибке!
+        
+        Перед отправкой, пожалуйста:
+        - Проверьте [существующие issues](https://github.com/remittor/zapret-openwrt/issues)
+        - Просмотрите [документацию](https://github.com/remittor/zapret-openwrt/wiki/)
+
+  - type: textarea
+    id: description
+    attributes:
+      label: 📝 Описание проблемы
+      description: Четкое и краткое описание того, что не работает
+      placeholder: Опишите проблему
+    validations:
+      required: true
+
+  - type: textarea
+    id: reproduction
+    attributes:
+      label: Шаги для воспроизведения
+      description: Шаги для воспроизведения проблемы. Если вы настраваете что-то по какому либо мануалу, приложите ссылку на него.
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected
+    attributes:
+      label: ✅ Ожидаемое поведение
+      description: Четкое и краткое описание того, что должно было произойти
+      placeholder: Опишите ожидаемое поведение
+    validations:
+      required: true
+
+  - type: textarea
+    id: environment
+    attributes:
+      label: 🖥️ Информация о системе
+      description: |
+        Информация о вашей системе (заполните всё применяемое)
+      value: |
+        - **OpenWrt версия**: 
+        - **Zapret версия**: 
+        - **Роутер модель**: 
+      render: markdown
+    validations:
+      required: true
+
+  - type: textarea
+    id: strategy
+    attributes:
+      label: ✅ Используемая стратегия NFQWS
+      description: Все параметры стратегии NFQWS, либо её название
+      placeholder: Если проблема вызвана стратегией NFQWS
+
+  - type: textarea
+    id: config
+    attributes:
+      label: ⚙️ Конфигурация
+      description: |
+        Релевантные части конфигурации (удалите чувствительную информацию!)
+      placeholder: |
+        Например:
+        - Содержимое /etc/config/zapret
+        - Конфигурация файервола (опция Flow offloading и т.п.)
+        - Дополнительные конфиги, которые потребуются wireless/network/dhcp и т.д.
+      render: shell
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@@ -0,0 +1,9 @@
+blank_issues_enabled: false
+contact_links:
+  - name: 💬 Installation instructions / Инструкция по установке 
+    url: https://github.com/remittor/zapret-openwrt/wiki/Installing-zapret%E2%80%90openwrt-package
+    about: Installation instructions / Инструкция по установке
+
+  - name: 📚 Original documetation / Оригинальная документация к zapret'у
+    url: https://github.com/bol-van/zapret/blob/master/docs/readme.md
+    about: README zapret
--- a/.github/ISSUE_TEMPLATE/feature_request_en.yml
+++ b/.github/ISSUE_TEMPLATE/feature_request_en.yml
@@ -0,0 +1,66 @@
+---
+name: ✨ Feature Request
+description: Suggest a new feature or improvement
+title: "[FEATURE] "
+labels: ["enhancement", "needs-discussion"]
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Before sending, please:
+        - Check [existing requests](https://github.com/remittor/zapret-openwrt/issues?q=is%3Aissue+label%3Aenhancement)
+        - Make sure the function doesn't exist in [documentation](https://github.com/remittor/zapret-openwrt/wiki/)
+
+  - type: textarea
+    id: summary
+    attributes:
+      label: Brief description
+      description: Brief description of the proposed function
+      placeholder: In one sentence, describe what you want to add...
+    validations:
+      required: true
+
+  - type: textarea
+    id: problem
+    attributes:
+      label: The problem it solves
+      description: |
+        Description of the problem or inconvenience this feature will solve
+      placeholder: |
+        There is no possibility now [...]
+    validations:
+      required: true
+
+  - type: textarea
+    id: solution
+    attributes:
+      label: 💡 Proposed solution
+      description: A clear and concise description of what you want to achieve
+      placeholder: |
+        I want Zapret to be able to [...]
+        I suggest adding a feature that [...]
+        Could be improved [...]
+    validations:
+      required: true
+
+  - type: textarea
+    id: alternatives
+    attributes:
+      label: Workaround
+      description: |
+        Describe any alternative solutions or features you considered.
+        Are there any workarounds you currently use?
+      placeholder: |
+        I'm currently solving this problem by [...]
+        An alternative would be [...]
+        I tried using [...], but it doesn't work because [...]
+
+  - type: textarea
+    id: implementation
+    attributes:
+      label: Implementation ideas (optional)
+      description: |
+        If you have any ideas on how this could be implemented, please share them. Please keep LuCI's limitations in mind.
+      placeholder: |
+        This can be achieved using [...]
--- a/.github/ISSUE_TEMPLATE/feature_request_ru.yml
+++ b/.github/ISSUE_TEMPLATE/feature_request_ru.yml
@@ -0,0 +1,68 @@
+---
+name: ✨ Запрос новой функции
+description: Предложите новую функцию или улучшение для Zapret
+title: "[FEATURE] "
+labels: ["enhancement", "needs-discussion"]
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Спасибо за предложение новой функции!
+        
+        Перед отправкой, пожалуйста:
+        - Проверьте [существующие запросы](https://github.com/remittor/zapret-openwrt/issues?q=is%3Aissue+label%3Aenhancement)
+        - Убедитесь, что функции не существует в [документации](https://github.com/remittor/zapret-openwrt/wiki/)
+
+  - type: textarea
+    id: summary
+    attributes:
+      label: Краткое описание
+      description: Краткое описание предлагаемой функции
+      placeholder: В одном предложении опишите, что вы хотите добавить...
+    validations:
+      required: true
+
+  - type: textarea
+    id: problem
+    attributes:
+      label: Проблема, которую решает
+      description: |
+        Описание проблемы или неудобства, которое решит эта функция
+      placeholder: |
+        Сейчас нет возможности [...]
+    validations:
+      required: true
+
+  - type: textarea
+    id: solution
+    attributes:
+      label: 💡 Предлагаемое решение
+      description: Четкое и краткое описание того, что вы хотите реализовать
+      placeholder: |
+        Я хочу, чтобы Zapret мог [...]
+        Предлагаю добавить функцию, которая [...]
+        Можно было бы улучшить [...] путем [...]
+    validations:
+      required: true
+
+  - type: textarea
+    id: alternatives
+    attributes:
+      label: Workaround
+      description: |
+        Опишите альтернативные решения или функции, которые вы рассматривали
+        Есть ли обходные пути, которые вы используете сейчас?
+      placeholder: |
+        Сейчас я решаю это проблему путем [...]
+        Альтернативой могло бы быть [...]
+        Пробовал использовать [...], но это не подходит потому что [...]
+
+  - type: textarea
+    id: implementation
+    attributes:
+      label: Идеи реализации (опционально)
+      description: |
+        Если у вас есть идеи о том, как это можно реализовать, поделитесь ими. Помните про ограничения LuCI.
+      placeholder: |
+        Это можно реализовать с помощью [...]
--- a/.github/ISSUE_TEMPLATE/help_wanted_en.yml
+++ b/.github/ISSUE_TEMPLATE/help_wanted_en.yml
@@ -0,0 +1,78 @@
+---
+name: 🆘 Help wanted
+description: Ask for help or propose to help
+title: "[HELP] "
+labels: ["help wanted"]
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Before sending, please:
+        - Check [existing issues](https://github.com/remittor/zapret-openwrt/issues)
+        - Read [documentation](https://github.com/remittor/zapret-openwrt/wiki/)
+
+  - type: textarea
+    id: description
+    attributes:
+      label: 📝 Problem description
+      description: What do you need help with?
+      placeholder: A clear and concise description of the problem
+    validations:
+      required: true
+
+  - type: textarea
+    id: reproduction
+    attributes:
+      label: Steps to reproduce
+      description: Steps to reproduce the problem. If you're following a manual, please include a link to it.
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected
+    attributes:
+      label: ✅ Expected behavior
+      description: A clear and concise description of what was to happen
+      placeholder: Describe the expected behavior
+    validations:
+      required: true
+
+  - type: textarea
+    id: environment
+    attributes:
+      label: 🖥️ System Information
+      description: |
+        Information about your system (fill in all that used)
+      value: |
+        - **OpenWrt version**: 
+        - **Zapret version**: 
+        - **Router model**: 
+      render: markdown
+    validations:
+      required: true
+
+  - type: textarea
+    id: strategy
+    attributes:
+      label: ✅ The NFQWS strategy used
+      description: All parameters of the NFQWS strategy, or its name
+      placeholder: If the problem is caused by the NFQWS strategy
+
+  - type: textarea
+    id: config
+    attributes:
+      label: ⚙️ System Configurations
+      description: |
+        Relevant parts of the configuration (remove sensitive information!)
+      placeholder: |
+        For example:
+        - Contents of /etc/config/zapret
+        - Firewall configuration (Flow offloading, etc.)
+        - Additional configurations required for wireless/network/dhcp, etc.
+      render: shell
--- a/.github/ISSUE_TEMPLATE/help_wanted_ru.yml
+++ b/.github/ISSUE_TEMPLATE/help_wanted_ru.yml
@@ -0,0 +1,78 @@
+---
+name: 🆘 Нужна помощь
+description: Нужна помощь
+title: "[HELP] "
+labels: ["help wanted"]
+assignees: []
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Перед отправкой, пожалуйста:
+        - Проверьте [существующие issues](https://github.com/remittor/zapret-openwrt/issues)
+        - Просмотрите [документацию](https://github.com/remittor/zapret-openwrt/wiki/)
+
+  - type: textarea
+    id: description
+    attributes:
+      label: 📝 Описание проблемы
+      description: В чём именно нужна помощь?
+      placeholder: Опишите проблему
+    validations:
+      required: true
+
+  - type: textarea
+    id: reproduction
+    attributes:
+      label: Шаги для воспроизведения
+      description: Шаги для воспроизведения проблемы. Если вы настраваете что-то по какому либо мануалу, приложите ссылку на него.
+      placeholder: |
+        1. 
+        2. 
+        3. 
+        4. 
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected
+    attributes:
+      label: ✅ Ожидаемое поведение
+      description: Четкое и краткое описание того, что должно было произойти
+      placeholder: Опишите ожидаемое поведение
+    validations:
+      required: true
+
+  - type: textarea
+    id: environment
+    attributes:
+      label: 🖥️ Информация о системе
+      description: |
+        Информация о вашей системе (заполните всё применяемое)
+      value: |
+        - **OpenWrt версия**: 
+        - **Zapret версия**: 
+        - **Роутер модель**: 
+      render: markdown
+    validations:
+      required: true
+
+  - type: textarea
+    id: strategy
+    attributes:
+      label: ✅ Используемая стратегия NFQWS
+      description: Все параметры стратегии NFQWS, либо её название
+      placeholder: Если проблема вызвана стратегией NFQWS
+
+  - type: textarea
+    id: config
+    attributes:
+      label: ⚙️ Конфигурация
+      description: |
+        Релевантные части конфигурации (удалите чувствительную информацию!)
+      placeholder: |
+        Например:
+        - Содержимое /etc/config/zapret
+        - Конфигурация файервола (опция Flow offloading и т.п.)
+        - Дополнительные конфиги, которые потребуются wireless/network/dhcp и т.д.
+      render: shell
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -155,6 +155,8 @@ jobs:
          - mipsel_24kc_24kf
          - mipsel_74kc
          - mipsel_mips32
+          - riscv64_riscv64
+          - riscv64_generic
          - x86_64
        isTestOrFake:
          - ${{ needs.check.outputs.test_build == 'true' || needs.check.outputs.fake_build == 'true' }}
@@ -163,6 +165,10 @@ jobs:
            arch: arm_cortex-a9_vfpv3-d16
          - branch: ${{ needs.var.outputs.APK_BRANCH }}
            arch: mips_4kec
+          - branch: ${{ needs.var.outputs.APK_BRANCH }}
+            arch: riscv64_riscv64
+          - branch: ${{ needs.var.outputs.IPK_BRANCH }}
+            arch: riscv64_generic
          - { isTestOrFake: true }
        include:
          - branch: ${{ needs.var.outputs.IPK_BRANCH }}
@@ -284,9 +290,9 @@ jobs:
        env:
          ARCH_TAG: ${{ matrix.arch }}
        run: |
-          PKGLIST="package/zapret-openwrt/zapret2/compile"
+          PKGLIST="package/zapret-openwrt/zapret/compile"
          if [ "$ARCH_TAG" = "$LUCI_ARCH" ]; then
-              PKGLIST="$PKGLIST package/zapret-openwrt/luci-app-zapret2/compile"
+              PKGLIST="$PKGLIST package/zapret-openwrt/luci-app-zapret/compile"
          fi
          MAKE_JOBS=$(nproc)
          echo "$MAKE_JOBS thread compile"
@@ -306,8 +312,8 @@ jobs:
        run: |
          OUT_DIR=./bin/packages/dev_x/base
          mkdir -p $OUT_DIR
-          touch $OUT_DIR/zapret2_$PKGVER-$ARCH_TAG.$PKGTYPE
-          touch $OUT_DIR/luci-app-zapret2_$PKGVER-all.$PKGTYPE
+          touch $OUT_DIR/zapret_$PKGVER-$ARCH_TAG.$PKGTYPE
+          touch $OUT_DIR/luci-app-zapret_$PKGVER-all.$PKGTYPE
          echo "status=success" >> $GITHUB_OUTPUT

      - name: Install packages
@@ -318,7 +324,7 @@ jobs:
          ARCH_TAG: ${{ matrix.arch }}
          SIGN_KEY: ${{ secrets.SIGN_PRIVATE_KEY }}
        run: |
-          find ./bin/packages/*/base -type f ! -regex ".*\(zapret2\).*\.[ai]pk$" -delete
+          find ./bin/packages/*/base -type f ! -regex ".*\(zapret\).*\.[ai]pk$" -delete
          #echo ">>>>>>> build a repository index to make the output directory usable as local OPKG source"
          #ln -s `which usign` staging_dir/host/bin/usign
          #echo "$SIGN_KEY" | base64 -d > key-build
@@ -384,7 +390,7 @@ jobs:
          find ./sorted -mindepth 1 -maxdepth 1 -type d -exec cp -f "$LUCI_IPK" "{}/" \;
          find ./sorted -mindepth 2 -maxdepth 2 -type d -name "apk" -exec cp -f "$LUCI_APK" "{}/" \;
          mkdir -p public
-          find ./sorted -mindepth 1 -maxdepth 1 -type d -exec sh -c '7z a ./public/zapret2_v${PKGVER}_$(basename "{}" | cut -d, -f3).zip {}/*' \;
+          find ./sorted -mindepth 1 -maxdepth 1 -type d -exec sh -c '7z a ./public/zapret_v${PKGVER}_$(basename "{}" | cut -d, -f3).zip {}/*' \;
          ls -lh ./public/*.zip

      - name: Upload assets
@@ -396,7 +402,7 @@ jobs:
          draft: ${{ env.TEST_BUILD == 'true' || env.FAKE_BUILD == 'true' }}
          prerelease: true
          tag_name: v${{ needs.build.outputs.pkgver }}${{ env.TAG_SUFFIX }}
-          name: zapret2 v${{ needs.build.outputs.pkgver }}
+          name: zapret v${{ needs.build.outputs.pkgver }}
          body: |
-            zapret2 v${{ needs.build.outputs.pkgver }} for OpenWrt
+            zapret v${{ needs.build.outputs.pkgver }} for OpenWrt
          files: ./public/*.zip
--- a/README.md
+++ b/README.md
@@ -2,13 +2,12 @@
 [![Github All Releases](https://img.shields.io/github/downloads/remittor/zapret-openwrt/total.svg)](https://github.com/remittor/zapret-openwrt/releases)
 [![Github Latest Release](https://img.shields.io/github/downloads/remittor/zapret-openwrt/latest/total.svg)](https://github.com/remittor/zapret-openwrt/releases)
 [![ViewCount](https://views.whatilearened.today/views/github/remittor/zapret-openwrt.svg)](https://github.com/remittor/zapret-openwrt)
-[![Hits](https://hits.seeyoufarm.com/api/count/incr/badge.svg?url=https%3A%2F%2Fgithub.com%2Fremittor%2Fzapret-openwrt&count_bg=%2379C83D&title_bg=%23555555&icon=&icon_color=%23E7E7E7&title=hits&edge_flat=false)](https://github.com/remittor/zapret-openwrt/releases)
 [![Donations Page](https://github.com/andry81-cache/gh-content-static-cache/raw/master/common/badges/donate/donate.svg)](https://github.com/remittor/donate)
 # zapret-openwrt

-Zapret2 is not a VPN! Zapret2 is an Anti-DPI utility!
+Zapret is not a VPN! Zapret is an Anti-DPI utility!

-[Instructions for installing](https://github.com/remittor/zapret-openwrt/wiki/Installing-zapret‐openwrt-package)
+[Instructions for installing](https://github.com/remittor/zapret-openwrt/wiki)

 [Download page](https://github.com/remittor/zapret-openwrt/releases)

--- a/luci-app-zapret2/Makefile
+++ b/luci-app-zapret2/Makefile
@@ -4,14 +4,14 @@

 include $(TOPDIR)/rules.mk

-PKG_NAME:=luci-app-zapret2
-PKG_VERSION:=0.8.20260113
+PKG_NAME:=luci-app-zapret
+PKG_VERSION:=72.20260114
 PKG_RELEASE:=1
 PKG_LICENSE:=MIT
 PKG_MAINTAINER:=remittor <https://github.com/remittor>

-LUCI_TITLE:=LuCI support for zapret2
-LUCI_DEPENDS:=+zapret2
+LUCI_TITLE:=LuCI support for zapret
+LUCI_DEPENDS:=+zapret
 LUCI_PKGARCH:=all

 define Package/$(PKG_NAME)/postinst
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/diagnost.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/diagnost.js
@@ -5,7 +5,7 @@
 'require uci';
 'require ui';
 'require view';
-'require view.zapret2.tools as tools';
+'require view.zapret.tools as tools';

 const btn_style_neutral  = 'btn';
 const btn_style_action   = 'btn cbi-button-action';
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/dmnlog.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/dmnlog.js
@@ -5,7 +5,7 @@
 'require poll';
 'require uci';
 'require ui';
-'require view.zapret2.tools as tools';
+'require view.zapret.tools as tools';

 return view.extend({
    retrieveLog: async function() {
--- a/luci-app-zapret/htdocs/luci-static/resources/view/zapret/env.js
+++ b/luci-app-zapret/htdocs/luci-static/resources/view/zapret/env.js
@@ -0,0 +1,53 @@
+'use strict';
+'require baseclass';
+
+return baseclass.extend({
+    packager          : { },
+    appName           : 'zapret',
+    AppName           : 'Zapret',
+    execPath          : '/etc/init.d/zapret',
+    appDir            : '/opt/zapret',
+    syncCfgPath       : '/opt/zapret/sync_config.sh',
+    defCfgPath        : '/opt/zapret/def-cfg.sh',
+    defaultCfgPath    : '/opt/zapret/restore-def-cfg.sh',
+
+    hostsGoogleFN     : '/opt/zapret/ipset/zapret-hosts-google.txt',
+    hostsUserFN       : '/opt/zapret/ipset/zapret-hosts-user.txt',
+    hostsUserExcludeFN: '/opt/zapret/ipset/zapret-hosts-user-exclude.txt',
+    iplstExcludeFN    : '/opt/zapret/ipset/zapret-ip-exclude.txt',
+    iplstUserFN       : '/opt/zapret/ipset/zapret-ip-user.txt',
+    iplstUserExcludeFN: '/opt/zapret/ipset/zapret-ip-user-exclude.txt',
+    custFileMax       : 4,
+    custFileTemplate  : '/opt/zapret/ipset/cust%s.txt',
+    customdPrefixList : [ 10, 20, 50, 60, 90 ] ,
+    customdFileFormat : '/opt/zapret/init.d/openwrt/custom.d/%s-script.sh',
+    discord_num       : 50,
+    discord_url       : [ 'https://github.com/bol-van/zapret/blob/4e8e3a9ed9dbeb1156db68dfaa7b353051c13797/init.d/custom.d.examples.linux/50-discord',
+                          'https://github.com/bol-van/zapret/blob/b251ea839cc8f04c45090314ef69fce69f2c00f2/init.d/custom.d.examples.linux/50-discord-media',
+                          'https://github.com/bol-van/zapret/blob/b251ea839cc8f04c45090314ef69fce69f2c00f2/init.d/custom.d.examples.linux/50-stun4all',
+                          'https://github.com/bol-van/zapret/tree/master/init.d/custom.d.examples.linux'
+                        ],
+    nfqws_opt_url     : 'https://github.com/remittor/zapret-openwrt/discussions/168',
+
+    autoHostListFN    : '/opt/zapret/ipset/zapret-hosts-auto.txt',
+    autoHostListDbgFN : '/opt/zapret/ipset/zapret-hosts-auto-debug.log',
+
+    load_env: function(dst_obj) {
+        let env_proto = Object.getPrototypeOf(this);
+        Object.getOwnPropertyNames(env_proto).forEach(function(key) {
+            if (key === 'constructor' || key === 'load_env' || key.startsWith('__'))
+                return;
+            dst_obj[key] = env_proto[key];
+        });
+        dst_obj.packager = { };
+        if (L.hasSystemFeature('apk')) {
+            dst_obj.packager.name = 'apk';
+            dst_obj.packager.path = '/usr/bin/apk';
+            dst_obj.packager.args = [ 'list', '-I', '*'+this.appName+'*' ];
+        } else {
+            dst_obj.packager.name = 'opkg';
+            dst_obj.packager.path = '/bin/opkg';
+            dst_obj.packager.args = [ 'list-installed', '*'+this.appName+'*' ];
+        }
+    }
+});
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/service.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/service.js
@@ -4,9 +4,9 @@
 'require uci';
 'require ui';
 'require view';
-'require view.zapret2.tools as tools';
-'require view.zapret2.diagnost as diagnost';
-'require view.zapret2.updater as updater';
+'require view.zapret.tools as tools';
+'require view.zapret.diagnost as diagnost';
+'require view.zapret.updater as updater';

 const btn_style_neutral  = 'btn';
 const btn_style_action   = 'btn cbi-button-action';
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/settings.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/settings.js
@@ -5,7 +5,12 @@
 'require uci';
 'require ui';
 'require view';
-'require view.zapret2.tools as tools';
+'require view.zapret.tools as tools';
+
+document.head.appendChild(E('link', {
+    rel: 'stylesheet',
+    href: L.resource('view/zapret/styles.css')
+}));

 return view.extend({
    parsers: { },
@@ -128,8 +133,10 @@ return view.extend({
            let btn = sec.taboption(tabname, form.Button, '_' + param + '_btn', locname);
            btn.inputtitle = _('Edit');
            btn.inputstyle = 'edit btn';
-            let val = sec.taboption(tabname, form.DummyValue, '_' + param);
-            val.rawhtml = multiline ? true : false;
+            let val = sec.taboption(tabname, form.TextValue, '_' + param);
+            val.readonly = true;
+            val.rows = rows + 5;
+            val.wrap = false;
            val.cfgvalue = function(section_id) {
                let value = uci.get(tools.appName, section_id, param);
                if (value == null) {
@@ -141,15 +148,10 @@ return view.extend({
                    value = value.replace(/\n --/g, "\n--");
                    value = value.replace(/ --/g, "\n--");
                }
-                if (val.rawhtml) {
-                    value = value.replace(/</g, '˂');
-                    value = value.replace(/>/g, '˃');
-                    value = value.replace(/\n/g, '<br/>');
-                }
                return value;
            };
            val.validate = function(section_id, value) {
-                return (value) ? value.trim() : "";
+                return true;
            };
            let desc = locname;
            if (multiline == 2) {
--- a/luci-app-zapret/htdocs/luci-static/resources/view/zapret/styles.css
+++ b/luci-app-zapret/htdocs/luci-static/resources/view/zapret/styles.css
@@ -0,0 +1,6 @@
+textarea, .cbi-value textarea
+{
+    white-space: pre;
+    overflow-x: auto;
+    font-family: monospace;
+}
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/tools.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/tools.js
@@ -4,7 +4,7 @@
 'require rpc';
 'require ui';
 'require uci';
-'require view.zapret2.env as env_tools';
+'require view.zapret.env as env_tools';

 document.head.append(E('style', {'type': 'text/css'},
 `
@@ -506,24 +506,10 @@ return baseclass.extend({
            value = value.replace(/˂/g, '<');
            value = value.replace(/˃/g, '>');
            try {
-                let elem = document.getElementById("cbi-" + this.appName + "-" + this.cfgsec + "-_" + this.cfgparam);
-                if (elem) {
-                    if (elem.querySelector('div')) {
-                        elem = elem.querySelector('div');
-                    } else {
-                        elem = elem.querySelector('output');
-                    }
-                }
+                let elem = document.getElementById("widget.cbid." + this.appName + ".config._" + this.cfgparam);
                if (elem) {
                    let val = value.trim();
-                    if (this.multiline) {
-                        val = val.replace(/</g, '˂');
-                        val = val.replace(/>/g, '˃');
-                        val = val.replace(/\n/g, '<br/>');
-                        elem.innerHTML = val;
-                    } else {
-                        elem.textContent = val;
-                    }
+                    elem.textContent = val;
                }
            } catch(e) {
                console.error('ERROR: cannot found elem for ' + this.cfgsec + '.' + this.cfgparam);
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/updater.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/updater.js
@@ -5,7 +5,7 @@
 'require uci';
 'require ui';
 'require view';
-'require view.zapret2.tools as tools';
+'require view.zapret.tools as tools';

 const btn_style_neutral  = 'btn';
 const btn_style_action   = 'btn cbi-button-action';
--- a/luci-app-zapret/root/usr/share/luci/menu.d/luci-app-zapret.json
+++ b/luci-app-zapret/root/usr/share/luci/menu.d/luci-app-zapret.json
@@ -0,0 +1,46 @@
+{
+	"admin/services/zapret": {
+		"title": "Zapret",
+		"order": 61,
+		"action": {
+			"type": "alias",
+			"path": "admin/services/zapret/service"
+		},
+		"depends": {
+			"acl": [ "luci-app-zapret" ],
+			"fs": {
+				"/opt/zapret/sync_config.sh": "executable",
+				"/opt/zapret/restore-def-cfg.sh": "executable",
+				"/etc/init.d/zapret": "executable"
+			},
+			"uci": { "zapret": true }
+		}
+	},
+
+	"admin/services/zapret/service": {
+		"title": "Service",
+		"order": 10,
+		"action": {
+			"type": "view",
+			"path": "zapret/service"
+		}
+	},
+
+	"admin/services/zapret/settings": {
+		"title": "Settings",
+		"order": 20,
+		"action": {
+			"type": "view",
+			"path": "zapret/settings"
+		}
+	},
+
+	"admin/services/zapret/dmnlog": {
+		"title": "Log Viewer",
+		"order": 30,
+		"action": {
+			"type": "view",
+			"path": "zapret/dmnlog"
+		}
+	}
+}
--- a/luci-app-zapret/root/usr/share/rpcd/acl.d/luci-app-zapret.json
+++ b/luci-app-zapret/root/usr/share/rpcd/acl.d/luci-app-zapret.json
@@ -0,0 +1,40 @@
+{
+	"luci-app-zapret": {
+		"description": "Grant access to zapret procedures",
+		"read": {
+			"cgi-io": [ "exec" ],
+			"file": {
+				"/opt/zapret/config": [ "read" ],
+				"/opt/zapret/ipset/*": [ "read" ],
+				"/opt/zapret/init.d/openwrt/custom.d/*": [ "read" ],
+				"/etc/crontabs/root": [ "read" ],
+				"/tmp/zapret*": [ "read" ],
+				"/etc/init.d/zapret*": [ "exec" ],
+				"/bin/ps*": [ "exec" ],
+				"/bin/cat*": [ "exec" ],
+				"/bin/busybox*": [ "exec" ],
+				"/bin/opkg*": [ "exec" ],
+				"/usr/bin/apk*": [ "exec" ],
+				"/usr/bin/find*": [ "exec" ],
+				"/opt/zapret/restore-def-cfg.sh*": [ "exec" ],
+				"/opt/zapret/script-exec.sh*": [ "exec" ],
+				"/opt/zapret/update-pkg.sh*": [ "exec" ],
+				"/opt/zapret/sync_config.sh*": [ "exec" ]
+			},
+			"uci": [ "zapret", "network" ],
+			"ubus": {
+				"luci": [ "getInitList", "setInitAction" ],
+				"service": [ "list" ]
+			}
+		},
+		"write": {
+			"file": {
+				"/opt/zapret/config": [ "write" ],
+				"/opt/zapret/ipset/*": [ "write" ],
+				"/opt/zapret/init.d/openwrt/custom.d/*": [ "write" ],
+				"/etc/crontabs/root": [ "write" ]
+			},
+			"uci": [ "zapret" ]
+		}
+	}
+}
--- a/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/env.js
+++ b/luci-app-zapret2/htdocs/luci-static/resources/view/zapret2/env.js
@@ -1,52 +0,0 @@
-'use strict';
-'require baseclass';
-
-return baseclass.extend({
-    packager          : { },
-    appName           : 'zapret2',
-    AppName           : 'Zapret2',
-    execPath          : '/etc/init.d/zapret2',
-    appDir            : '/opt/zapret2',
-    syncCfgPath       : '/opt/zapret2/sync_config.sh',
-    defCfgPath        : '/opt/zapret2/def-cfg.sh',
-    defaultCfgPath    : '/opt/zapret2/restore-def-cfg.sh',
-
-    hostsGoogleFN     : '/opt/zapret2/ipset/zapret-hosts-google.txt',
-    hostsUserFN       : '/opt/zapret2/ipset/zapret-hosts-user.txt',
-    hostsUserExcludeFN: '/opt/zapret2/ipset/zapret-hosts-user-exclude.txt',
-    iplstExcludeFN    : '/opt/zapret2/ipset/zapret-ip-exclude.txt',
-    iplstUserFN       : '/opt/zapret2/ipset/zapret-ip-user.txt',
-    iplstUserExcludeFN: '/opt/zapret2/ipset/zapret-ip-user-exclude.txt',
-    custFileMax       : 4,
-    custFileTemplate  : '/opt/zapret2/ipset/cust%s.txt',
-    customdPrefixList : [ 10, 20, 50, 60, 90 ] ,
-    customdFileFormat : '/opt/zapret2/init.d/openwrt/custom.d/%s-script.sh',
-    discord_num       : 50,
-    discord_url       : [ 'https://github.com/bol-van/zapret2/blob/master/init.d/custom.d.examples.linux/50-discord-media',
-                          'https://github.com/bol-van/zapret2/blob/master/init.d/custom.d.examples.linux/50-stun4all',
-                          'https://github.com/bol-van/zapret2/tree/master/init.d/custom.d.examples.linux'
-                        ],
-    nfqws_opt_url     : 'https://github.com/remittor/zapret-openwrt/discussions/',
-
-    autoHostListFN    : '/opt/zapret2/ipset/zapret-hosts-auto.txt',
-    autoHostListDbgFN : '/opt/zapret2/ipset/zapret-hosts-auto-debug.log',
-
-    load_env: function(dst_obj) {
-        let env_proto = Object.getPrototypeOf(this);
-        Object.getOwnPropertyNames(env_proto).forEach(function(key) {
-            if (key === 'constructor' || key === 'load_env' || key.startsWith('__'))
-                return;
-            dst_obj[key] = env_proto[key];
-        });
-        dst_obj.packager = { };
-        if (L.hasSystemFeature('apk')) {
-            dst_obj.packager.name = 'apk';
-            dst_obj.packager.path = '/usr/bin/apk';
-            dst_obj.packager.args = [ 'list', '-I', '*'+this.appName+'*' ];
-        } else {
-            dst_obj.packager.name = 'opkg';
-            dst_obj.packager.path = '/bin/opkg';
-            dst_obj.packager.args = [ 'list-installed', '*'+this.appName+'*' ];
-        }
-    }
-});
--- a/luci-app-zapret2/root/usr/share/luci/menu.d/luci-app-zapret2.json
+++ b/luci-app-zapret2/root/usr/share/luci/menu.d/luci-app-zapret2.json
@@ -1,41 +0,0 @@
-{
-	"admin/services/zapret2": {
-		"title": "Zapret2",
-		"order": 62,
-		"action": {
-			"type": "alias",
-			"path": "admin/services/zapret2/service"
-		},
-		"depends": {
-			"acl": [ "luci-app-zapret2" ],
-			"uci": { "zapret2": true }
-		}
-	},
-
-	"admin/services/zapret2/service": {
-		"title": "Service",
-		"order": 10,
-		"action": {
-			"type": "view",
-			"path": "zapret2/service"
-		}
-	},
-
-	"admin/services/zapret2/settings": {
-		"title": "Settings",
-		"order": 20,
-		"action": {
-			"type": "view",
-			"path": "zapret2/settings"
-		}
-	},
-
-	"admin/services/zapret2/dmnlog": {
-		"title": "Log Viewer",
-		"order": 30,
-		"action": {
-			"type": "view",
-			"path": "zapret2/dmnlog"
-		}
-	}
-}
--- a/luci-app-zapret2/root/usr/share/rpcd/acl.d/luci-app-zapret2.json
+++ b/luci-app-zapret2/root/usr/share/rpcd/acl.d/luci-app-zapret2.json
@@ -1,40 +0,0 @@
-{
-	"luci-app-zapret2": {
-		"description": "Grant access to zapret2 procedures",
-		"read": {
-			"cgi-io": [ "exec" ],
-			"file": {
-				"/opt/zapret2/config": [ "read" ],
-				"/opt/zapret2/ipset/*": [ "read" ],
-				"/opt/zapret2/init.d/openwrt/custom.d/*": [ "read" ],
-				"/etc/crontabs/root": [ "read" ],
-				"/tmp/zapret*": [ "read" ],
-				"/etc/init.d/zapret2*": [ "exec" ],
-				"/bin/ps*": [ "exec" ],
-				"/bin/cat*": [ "exec" ],
-				"/bin/busybox*": [ "exec" ],
-				"/bin/opkg*": [ "exec" ],
-				"/usr/bin/apk*": [ "exec" ],
-				"/usr/bin/find*": [ "exec" ],
-				"/opt/zapret2/restore-def-cfg.sh*": [ "exec" ],
-				"/opt/zapret2/script-exec.sh*": [ "exec" ],
-				"/opt/zapret2/update-pkg.sh*": [ "exec" ],
-				"/opt/zapret2/sync_config.sh*": [ "exec" ]
-			},
-			"uci": [ "zapret2", "network" ],
-			"ubus": {
-				"luci": [ "getInitList", "setInitAction" ],
-				"service": [ "list" ]
-			}
-		},
-		"write": {
-			"file": {
-				"/opt/zapret2/config": [ "write" ],
-				"/opt/zapret2/ipset/*": [ "write" ],
-				"/opt/zapret2/init.d/openwrt/custom.d/*": [ "write" ],
-				"/etc/crontabs/root": [ "write" ]
-			},
-			"uci": [ "zapret2" ]
-		}
-	}
-}
--- a/zapret/Makefile
+++ b/zapret/Makefile
@@ -0,0 +1,319 @@
+#
+# Copyright (c) 2024 remittor
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=zapret
+PKG_VERSION:=72.20260114
+PKG_RELEASE:=1
+
+PKG_MAINTAINER:=bol-van
+PKG_LICENSE:=MIT
+PKG_LICENSE_FILES:=docs/LICENSE.txt
+
+PKG_SOURCE_URL:=https://github.com/bol-van/zapret.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=76764ad6b0ee7d3991c97e7b8c24d53189d25c28
+PKG_SOURCE_DATE:=2026-01-14
+
+#PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+#PKG_SOURCE_URL:=https://github.com/bol-van/zapret/archive/refs/tags/v$(PKG_VERSION).tar.gz?
+#PKG_HASH:=skip
+
+include $(INCLUDE_DIR)/package.mk
+
+#TAR_OPTIONS:=--strip-components 1 $(TAR_OPTIONS)
+#TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
+
+MAKE_PATH:=nfq
+
+define Package/$(PKG_NAME)
+	SECTION:=net
+	CATEGORY:=Network
+	TITLE:=$(PKG_NAME)
+	SUBMENU:=Zapret
+	URL:=https://github.com/bol-van/zapret
+	DEPENDS:= +nftables +curl +gzip
+	DEPENDS+= +coreutils +coreutils-sort +coreutils-sleep
+	DEPENDS+= +kmod-nft-nat +kmod-nft-offload +kmod-nft-queue
+	DEPENDS+= +libnetfilter-queue +libcap +zlib
+endef
+
+define Build/Prepare
+	$(Build/Prepare/Default)
+	rm -f $(PKG_BUILD_DIR)/$(MAKE_PATH)/nfqws
+	rm -f $(PKG_BUILD_DIR)/ip2net/ip2net
+	rm -f $(PKG_BUILD_DIR)/mdig/mdig
+endef
+
+#define Build/Configure
+#endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR)/$(MAKE_PATH) $(TARGET_CONFIGURE_OPTS)
+	$(MAKE) -C $(PKG_BUILD_DIR)/ip2net $(TARGET_CONFIGURE_OPTS)
+	$(MAKE) -C $(PKG_BUILD_DIR)/mdig $(TARGET_CONFIGURE_OPTS)
+endef
+
+define Package/$(PKG_NAME)/conffiles
+/opt/zapret/config
+/opt/zapret/ipset/zapret-hosts-google.txt
+/opt/zapret/ipset/zapret-hosts-user.txt
+/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+/opt/zapret/ipset/zapret-ip-exclude.txt
+/opt/zapret/ipset/zapret-hosts-auto.txt
+/opt/zapret/init.d/openwrt/custom.d/10-script.sh
+/opt/zapret/init.d/openwrt/custom.d/20-script.sh
+/opt/zapret/init.d/openwrt/custom.d/50-script.sh
+/opt/zapret/init.d/openwrt/custom.d/60-script.sh
+/opt/zapret/init.d/openwrt/custom.d/90-script.sh
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/opt/zapret
+	$(INSTALL_DIR) $(1)/opt/zapret/$(MAKE_PATH)
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(MAKE_PATH)/nfqws $(1)/opt/zapret/$(MAKE_PATH)/
+	$(INSTALL_DIR) $(1)/opt/zapret/ip2net
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ip2net/ip2net $(1)/opt/zapret/ip2net/
+	$(INSTALL_DIR) $(1)/opt/zapret/mdig
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mdig/mdig $(1)/opt/zapret/mdig/
+	$(INSTALL_DIR) $(1)/opt/zapret/common
+	$(CP) $(PKG_BUILD_DIR)/common/* $(1)/opt/zapret/common/
+	#$(INSTALL_DIR) $(1)/opt/zapret/docs
+	#$(CP) $(PKG_BUILD_DIR)/docs/* $(1)/opt/zapret/docs/
+	$(INSTALL_DIR) $(1)/opt/zapret/files
+	$(CP) $(PKG_BUILD_DIR)/files/* $(1)/opt/zapret/files/
+	$(CP)                ./files/* $(1)/opt/zapret/files/
+	$(INSTALL_DIR) $(1)/opt/zapret/ipset
+	$(CP) $(PKG_BUILD_DIR)/ipset/* $(1)/opt/zapret/ipset/
+	$(INSTALL_BIN)  $(PKG_BUILD_DIR)/blockcheck.sh  $(1)/opt/zapret/blockcheck.sh
+	#$(INSTALL_DATA) $(PKG_BUILD_DIR)/config.default $(1)/opt/zapret/config.default
+	$(INSTALL_DIR) $(1)/opt/zapret/tmp
+	$(INSTALL_DIR) $(1)/opt/zapret/init.d/openwrt
+	$(CP) $(PKG_BUILD_DIR)/init.d/openwrt/* $(1)/opt/zapret/init.d/openwrt/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/openwrt/90-zapret $(1)/etc/hotplug.d/iface/90-zapret
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./init.d.sh $(1)/etc/init.d/zapret
+	$(INSTALL_DATA) ./config.default $(1)/opt/zapret/config.default
+	$(INSTALL_DATA) ./config.default $(1)/opt/zapret/config
+	$(INSTALL_DATA) ./ipset/zapret-hosts-google.txt       $(1)/opt/zapret/ipset/zapret-hosts-google.txt
+	$(INSTALL_DATA) ./ipset/zapret-hosts-user.txt         $(1)/opt/zapret/ipset/zapret-hosts-user.txt
+	$(INSTALL_DATA) ./ipset/zapret-hosts-user-exclude.txt $(1)/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+	$(INSTALL_DATA) ./ipset/zapret-ip-exclude.txt         $(1)/opt/zapret/ipset/zapret-ip-exclude.txt
+	$(INSTALL_DIR) $(1)/opt/zapret/ipset_def
+	$(INSTALL_DATA) ./ipset/zapret-hosts-google.txt       $(1)/opt/zapret/ipset_def/zapret-hosts-google.txt
+	$(INSTALL_DATA) ./ipset/zapret-hosts-user.txt         $(1)/opt/zapret/ipset_def/zapret-hosts-user.txt
+	$(INSTALL_DATA) ./ipset/zapret-hosts-user-exclude.txt $(1)/opt/zapret/ipset_def/zapret-hosts-user-exclude.txt
+	$(INSTALL_DATA) ./ipset/zapret-ip-exclude.txt         $(1)/opt/zapret/ipset_def/zapret-ip-exclude.txt
+	$(INSTALL_DIR) $(1)/opt/zapret/init.d
+	$(INSTALL_DIR) $(1)/opt/zapret/init.d/openwrt
+	$(INSTALL_DIR) $(1)/opt/zapret/init.d/openwrt/custom.d
+	$(CP) ./custom.d/* $(1)/opt/zapret/init.d/openwrt/custom.d/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./uci-def-cfg.sh     $(1)/etc/uci-defaults/zapret-uci-def-cfg.sh
+	# install all sh-scripts
+	$(CP) ./*.sh $(1)/opt/zapret/
+	rm -f $(1)/opt/zapret/init.d.sh
+	# Create empty conf files
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/ipset/zapret-hosts-auto.txt
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/ipset/cust1.txt
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/ipset/cust2.txt
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/ipset/cust3.txt
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/ipset/cust4.txt
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/init.d/openwrt/custom.d/10-script.sh
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/init.d/openwrt/custom.d/20-script.sh
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/init.d/openwrt/custom.d/60-script.sh
+	$(INSTALL_DATA) /dev/null $(1)/opt/zapret/init.d/openwrt/custom.d/90-script.sh
+	# Fix permissions
+	chmod 644 $(1)/opt/zapret/ipset/*.txt
+	chmod 644 $(1)/opt/zapret/ipset_def/*.txt
+	chmod 644 $(1)/opt/zapret/init.d/openwrt/custom.d/*.sh
+	chmod 644 $(1)/opt/zapret/config*
+	chmod 755 $(1)/opt/zapret/*.sh
+	chmod 755 $(1)/opt/zapret/$(MAKE_PATH)/*
+	chmod 755 $(1)/opt/zapret/ip2net/*
+	chmod 755 $(1)/opt/zapret/mdig/*
+	# Disable TPWS in blockcheck
+	grep -q '^SKIP_TPWS=' $(1)/opt/zapret/blockcheck.sh || sed -i '/^NFT_TABLE=blockcheck$$$$/a SKIP_TPWS=$$$${SKIP_TPWS:-1}' $(1)/opt/zapret/blockcheck.sh
+endef
+
+define Package/$(PKG_NAME)/preinst
+#!/bin/sh
+# check if we are on real system
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	ZAPRET_DIR=/opt/zapret
+	ZAPRET_INITD=/etc/init.d/zapret
+	ZAPRET_CFG=/etc/config/zapret
+	if [ -f "$${ZAPRET_INITD}" ]; then
+		SCRIPT=$$( readlink "$${ZAPRET_INITD}" )
+		if [ -n "$${SCRIPT}" ]; then
+			echo "Please uninstall incompatible \"zapret\" service!"
+			exit 44
+		fi
+	fi
+	if command -v apk >/dev/null; then
+		PKG_MGR="apk"
+		PKG_CHECK="apk info -e "
+		PKG_REMOVE="apk del --force "
+	else
+		PKG_MGR="opkg"
+		PKG_CHECK="opkg status "
+		PKG_REMOVE="opkg remove --force-remove "
+	fi
+	if [ "$${PKG_UPGRADE}" = "1" ]; then
+		# stop service if PKG_UPGRADE
+		if [ -x "$${ZAPRET_INITD}" ]; then
+			$${ZAPRET_INITD} running && $${ZAPRET_INITD} stop >/dev/null 2>&1
+		fi
+	fi
+	if $${PKG_CHECK} zapret >/dev/null 2>&1; then
+		if [ ! -f "/opt/zapret/sync_config.sh" ]; then
+			echo "Please uninstall incompatible \"zapret\" package!"
+			exit 47
+		fi
+		if [ -f "$${ZAPRET_CFG}" ] && ! grep -q "run_on_boot" "$${ZAPRET_CFG}"; then
+			echo "Please uninstall incompatible \"zapret\" package!"
+			exit 48
+		fi
+	fi
+	if $${PKG_CHECK} luci-app-zapret >/dev/null 2>&1; then
+		SVC_FILE=/www/luci-static/resources/view/zapret/service.js
+		if [ ! -f "$${SVC_FILE}" ] || ! grep -Fq "/remittor/zapret-openwrt" "$${SVC_FILE}"; then
+			echo "Please uninstall incompatible \"luci-app-zapret\" package!"
+			exit 55
+		fi
+	fi
+	if [ -f "$${ZAPRET_CFG}" ] && ! grep -q "run_on_boot" "$${ZAPRET_CFG}"; then
+		if [ -x "$${ZAPRET_INITD}" ]; then
+			$${ZAPRET_INITD} running && $${ZAPRET_INITD} stop >/dev/null 2>&1
+		fi
+		rm -f $${ZAPRET_CFG}
+		rm -f $${ZAPRET_INITD}
+		[ -d "$${ZAPRET_DIR}" ] && rm -rf $${ZAPRET_DIR}
+		echo "All files of the previously installed package have been removed!"
+	fi
+	if $${PKG_CHECK} zapret-mdig >/dev/null 2>&1; then
+		$${PKG_REMOVE} zapret-mdig
+	fi
+	if $${PKG_CHECK} zapret-ip2net >/dev/null 2>&1; then
+		$${PKG_REMOVE} zapret-ip2net
+	fi
+	if [ ! -d "$${ZAPRET_DIR}" ]; then
+		mkdir -p $${ZAPRET_DIR}
+	fi
+	if [ ! -f "/opt/zapret/ipset/zapret-hosts-google.txt" ]; then
+		if [ -f "/opt/zapret/ipset/zapret-hosts-user.txt" ]; then
+			CFGLISTHASH=$$( md5sum "/opt/zapret/ipset/zapret-hosts-user.txt" | awk '{print $$1;}' )
+			if [ "$${CFGLISTHASH}" = "79e35df62b0d1ae455d0a7e04c4cecac" ]; then
+				rm -f "/opt/zapret/ipset/zapret-hosts-user.txt"
+			fi
+		fi
+	fi
+fi
+exit 0
+endef
+
+define Package/$(PKG_NAME)/postinst
+#!/bin/sh
+# check if we are on real system
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	ZAPRET_DIR=/opt/zapret
+	ZAPRET_INITD=/etc/init.d/zapret
+	ZAPRET_CFG=/etc/config/zapret
+	ZAPRET_CONFIG=/opt/zapret/config
+	ZAPRET_CONFIG_DEF="/opt/zapret/config.default"
+	# Fix permissions
+	chmod 644 $${ZAPRET_CFG} >/dev/null 2>&1
+	chmod 644 $${ZAPRET_DIR}/ipset/*.txt >/dev/null 2>&1
+	chmod 644 $${ZAPRET_DIR}/ipset_def/*.txt >/dev/null 2>&1
+	chmod 644 $${ZAPRET_DIR}/init.d/openwrt/custom.d/*.sh >/dev/null 2>&1
+	chmod 644 $${ZAPRET_DIR}/config* >/dev/null 2>&1
+	# creating main config if its not exists
+	if [ ! -f "$${ZAPRET_CONFIG}" ]; then
+		cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
+	fi
+	# check obsolete format for main config
+	if grep -qE "^NFQWS_OPT_DESYNC=|^MODE_HTTP=|^MODE_HTTPS=|^MODE_QUIC=|^MODE=" "$${ZAPRET_CONFIG}" ; then
+		echo "Detect obsolute format for main config!"
+		ZAPRET_CONFIG_BACKUP="$${ZAPRET_CONFIG}.backup"
+		cp -f "$${ZAPRET_CONFIG}" "$${ZAPRET_CONFIG_BACKUP}"
+		echo "Current file $${ZAPRET_CONFIG} backuped to $${ZAPRET_CONFIG_BACKUP}"
+		cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
+	fi
+	# remove fake uci-config
+	[ -f "$${ZAPRET_CFG}" ] && [ ! -s "$${ZAPRET_CFG}" ] && rm -f "$${ZAPRET_CFG}"
+	# check existing uci-config
+	[ -f "$${ZAPRET_CFG}" ] && ZAPRET_CFG_EXISTS=1 || ZAPRET_CFG_EXISTS=0
+	# create or merge uci-config
+	/opt/zapret/uci-def-cfg.sh
+	[ "$${ZAPRET_CFG_EXISTS}" = "1" ] && echo "Config /etc/config/zapret merged with default uci-config"
+	# remove uci-default script from system dir (used into /etc/init.d/boot)
+	rm -f /etc/uci-defaults/zapret-uci-def-cfg.sh
+	# copy (sync) all params from uci-config to main config
+	/opt/zapret/sync_config.sh
+	# check main config
+	sh -n "$${ZAPRET_CONFIG}" 2>/dev/null || cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
+	sh -n "$${ZAPRET_CONFIG}" 2>/dev/null || exit 58
+	# enable main service
+	$${ZAPRET_INITD} enable
+	# stop all
+	$${ZAPRET_INITD} stop_fw >/dev/null 2>&1
+	$${ZAPRET_INITD} stop_daemons >/dev/null 2>&1
+	ps w | grep '/opt/zapret/nfq/nfqws' | grep -v grep | awk '{print $$1}' | xargs -r kill -9
+	# start main service
+	$${ZAPRET_INITD} start
+	# restart firewall
+	[ -x /sbin/fw4 ] && fw4 -q restart || fw3 -q restart
+fi
+exit 0
+endef
+
+define Package/$(PKG_NAME)/prerm
+#!/bin/sh
+# check if we are on real system
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	ZAPRET_DIR=/opt/zapret
+	ZAPRET_BASE=/opt/zapret
+	ZAPRET_INITD=/etc/init.d/zapret
+	ZAPRET_CFG=/etc/config/zapret
+	ZAPRET_CONFIG=/opt/zapret/config
+	ZAPRET_CONFIG_DEF="/opt/zapret/config.default"
+	OPENWRT_FW_INCLUDE=/etc/firewall.zapret
+	# check main config
+	sh -n "$${ZAPRET_CONFIG}" 2>/dev/null || cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
+	if ! sh -n "$${ZAPRET_CONFIG}" 2>/dev/null ; then
+		ps w | grep '/opt/zapret/nfq/nfqws' | grep -v grep | awk '{print $$1}' | xargs -r kill -9
+		exit 0
+	fi
+	. "$${ZAPRET_CONFIG}"
+	. "$${ZAPRET_BASE}/common/base.sh"
+	. "$${ZAPRET_BASE}/common/fwtype.sh"
+	. "$${ZAPRET_BASE}/common/nft.sh"
+	. "$${ZAPRET_BASE}/common/installer.sh"
+	$${ZAPRET_INITD} running && $${ZAPRET_INITD} stop >/dev/null 2>&1
+	$${ZAPRET_INITD} disable >/dev/null 2>&1
+	ps w | grep '/opt/zapret/nfq/nfqws' | grep -v grep | awk '{print $$1}' | xargs -r kill -9
+	remove_openwrt_firewall
+	nft_del_table
+	restart_openwrt_firewall
+fi
+exit 0
+endef
+
+define Package/$(PKG_NAME)/postrm
+#!/bin/sh
+# check if we are on real system
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	rm -f /etc/config/zapret-opkg*
+	rm -f /etc/config/zapret.opkg*
+	rm -f /etc/config/zapret.apk*
+	[ -f "/opt/zapret/config" ] && cp -f /opt/zapret/config "/opt/zapret/config.backup"
+	#rm -rf /opt/zapret
+	#echo "Directory /opt/zapret removed!"
+fi
+exit 0
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))
--- a/zapret2/comfunc.sh
+++ b/zapret2/comfunc.sh
@@ -1,20 +1,20 @@
 #!/bin/sh
 # Copyright (c) 2024 remittor

-EXEDIR=/opt/zapret2
-ZAPRET_BASE=/opt/zapret2
+EXEDIR=/opt/zapret
+ZAPRET_BASE=/opt/zapret

-ZAPRET_INITD=/etc/init.d/zapret2
-ZAPRET_ORIG_INITD="$ZAPRET_BASE/init.d/openwrt/zapret2"
+ZAPRET_INITD=/etc/init.d/zapret
+ZAPRET_ORIG_INITD="$ZAPRET_BASE/init.d/openwrt/zapret"

-ZAP_LOG_TAG=ZAPRET2
+ZAP_LOG_TAG=ZAPRET

 ZAPRET_CONFIG="$ZAPRET_BASE/config"
 ZAPRET_CONFIG_NEW="$ZAPRET_BASE/config.new"
 ZAPRET_CONFIG_DEF="$ZAPRET_BASE/config.default"

-ZAPRET_CFG=/etc/config/zapret2
-ZAPRET_CFG_NAME=zapret2
+ZAPRET_CFG=/etc/config/zapret
+ZAPRET_CFG_NAME=zapret
 ZAPRET_CFG_SEC=$ZAPRET_CFG_NAME.config
 ZAPRET_CFG_SEC_NAME="$( uci -q get $ZAPRET_CFG_SEC )"

@@ -179,7 +179,7 @@ function insert_cron_task_logs
 {
 	[ ! -f "$CRONTAB_FILE" ] && touch "$CRONTAB_FILE"
 	[ ! -f "$CRONTAB_FILE" ] && return 1
-	if ! grep -q -e "-name '$ZAPRET_CFG_NAME\*\.log' -size \+" "$CRONTAB_FILE"; then
+	if ! grep -q -e "-name '$ZAPRET_CFG_NAME+\*\.log' -size \+" "$CRONTAB_FILE"; then
 		echo "*/2 * * * * /usr/bin/find /tmp -maxdepth 1 -type f -name '$ZAPRET_CFG_NAME+*.log' -size +2600k -exec rm -f {} \;" >> "$CRONTAB_FILE"
 		/etc/init.d/cron restart 2> /dev/null
 	fi
--- a/zapret2/config.default
+++ b/zapret2/config.default
@@ -30,25 +30,14 @@ IP2NET_OPT4="--prefix-length=22-30 --v4-threshold=3/4"
 IP2NET_OPT6="--prefix-length=56-64 --v6-threshold=5"

 # options for auto hostlist
-# NOTE : in order for these adjustment to work it's required to redirect enough starting packets
-# NOTE : set PKT_IN, PKT_OUT variables appropriately
-AUTOHOSTLIST_INCOMING_MAXSEQ=4096
-AUTOHOSTLIST_RETRANS_MAXSEQ=32768
-AUTOHOSTLIST_RETRANS_RESET=1
 AUTOHOSTLIST_RETRANS_THRESHOLD=3
 AUTOHOSTLIST_FAIL_THRESHOLD=3
 AUTOHOSTLIST_FAIL_TIME=60
-AUTOHOSTLIST_UDP_IN=1
-AUTOHOSTLIST_UDP_OUT=4
 # 1 = debug autohostlist positives to ipset/zapret-hosts-auto-debug.log
 AUTOHOSTLIST_DEBUGLOG=0

 # number of parallel threads for domain list resolves
 MDIG_THREADS=30
-# EAI_AGAIN retries
-MDIG_EAGAIN=10
-# delay between EAI_AGAIN retries (ms)
-MDIG_EAGAIN_DELAY=500

 # ipset/*.sh can compress large lists
 GZIP_LISTS=0
@@ -74,30 +63,47 @@ DESYNC_MARK_POSTNAT=0x20000000
 FILTER_MARK=""


-NFQWS2_ENABLE=1
+TPWS_SOCKS_ENABLE=0
+# tpws socks listens on this port on localhost and LAN interfaces
+TPPORT_SOCKS=987
+# use <HOSTLIST> and <HOSTLIST_NOAUTO> placeholders to engage standard hostlists and autohostlist in ipset dir
+# hostlist markers are replaced to empty string if MODE_FILTER does not satisfy
+# <HOSTLIST_NOAUTO> appends ipset/zapret-hosts-auto.txt as normal list
+TPWS_SOCKS_OPT="--filter-tcp=80 --methodeol <HOSTLIST> --new --filter-tcp=443 --split-tls=sni --disorder <HOSTLIST>"
+
+TPWS_ENABLE=0
+TPWS_PORTS="80,443"
+# use <HOSTLIST> and <HOSTLIST_NOAUTO> placeholders to engage standard hostlists and autohostlist in ipset dir
+# hostlist markers are replaced to empty string if MODE_FILTER does not satisfy
+# <HOSTLIST_NOAUTO> appends ipset/zapret-hosts-auto.txt as normal list
+TPWS_OPT="--filter-tcp=80 --methodeol <HOSTLIST> --new --filter-tcp=443 --split-tls=sni --disorder <HOSTLIST>"
+
+
+NFQWS_ENABLE=1

 # redirect outgoing traffic with connbytes limiter applied in both directions.
-NFQWS2_PORTS_TCP="80,443"
-NFQWS2_PORTS_UDP="443"
+NFQWS_PORTS_TCP="80,443"
+NFQWS_PORTS_UDP="443"

 # PKT_OUT means connbytes dir original
 # PKT_IN means connbytes dir reply
-NFQWS2_TCP_PKT_OUT="20"
-NFQWS2_TCP_PKT_IN="10"
-NFQWS2_UDP_PKT_OUT="5"
-NFQWS2_UDP_PKT_IN="3"
+# this is --dpi-desync-cutoff=nX kernel mode implementation for linux. it saves a lot of CPU.
+NFQWS_TCP_PKT_OUT="9"
+NFQWS_TCP_PKT_IN="3"
+NFQWS_UDP_PKT_OUT="9"
+NFQWS_UDP_PKT_IN="0"

 # redirect outgoing traffic without connbytes limiter and incoming with connbytes limiter
 # normally it's needed only for stateless DPI that matches every packet in a single TCP session
 # typical example are plain HTTP keep alives
 # this mode can be very CPU consuming. enable with care !
-NFQWS2_PORTS_TCP_KEEPALIVE=""
-NFQWS2_PORTS_UDP_KEEPALIVE=""
+NFQWS_PORTS_TCP_KEEPALIVE=""
+NFQWS_PORTS_UDP_KEEPALIVE=""

 # use <HOSTLIST> and <HOSTLIST_NOAUTO> placeholders to engage standard hostlists and autohostlist in ipset dir
 # hostlist markers are replaced to empty string if MODE_FILTER does not satisfy
 # <HOSTLIST_NOAUTO> appends ipset/zapret-hosts-auto.txt as normal list
-NFQWS2_OPT="--filter-tcp=80 --filter-l7=http <HOSTLIST> --payload=http_req --lua-desync=fake:blob=fake_default_http:tcp_md5 --lua-desync=multisplit:pos=method+2 --new --filter-tcp=443 --filter-l7=tls <HOSTLIST> --payload=tls_client_hello --lua-desync=fake:blob=fake_default_tls:tcp_md5:tcp_seq=-10000 --lua-desync=multidisorder:pos=1,midsld --new --filter-udp=443 --filter-l7=quic <HOSTLIST_NOAUTO> --payload=quic_initial --lua-desync=fake:blob=fake_default_quic:repeats=6"
+NFQWS_OPT="--filter-tcp=80 <HOSTLIST> --dpi-desync=fake,fakedsplit --dpi-desync-autottl=2 --dpi-desync-fooling=badsum --new --filter-tcp=443 --hostlist=/opt/zapret/ipset/zapret-hosts-google.txt --dpi-desync=fake,multidisorder --dpi-desync-split-pos=1,midsld --dpi-desync-repeats=11 --dpi-desync-fooling=badsum --dpi-desync-fake-tls-mod=rnd,dupsid,sni=www.google.com --new --filter-udp=443 --hostlist=/opt/zapret/ipset/zapret-hosts-google.txt --dpi-desync=fake --dpi-desync-repeats=11 --dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin --new --filter-udp=443 <HOSTLIST_NOAUTO> --dpi-desync=fake --dpi-desync-repeats=11 --new --filter-tcp=443 <HOSTLIST> --dpi-desync=multidisorder --dpi-desync-split-pos=1,sniext+1,host+1,midsld-2,midsld,midsld+2,endhost-1"


 DISABLE_CUSTOM=1
@@ -115,8 +121,9 @@ FLOWOFFLOAD=none
 # for routers based on desktop linux and macos. has no effect in openwrt.
 # CHOOSE LAN and optinally WAN/WAN6 NETWORK INTERFACES
 # or leave them commented if its not router
-# it's possible to specify multiple interfaces like this : IFACE_WAN="eth0 eth1 eth2"
+# it's possible to specify multiple interfaces like this : IFACE_LAN="eth0 eth1 eth2"
 # if IFACE_WAN6 is not defined it take the value of IFACE_WAN
+#IFACE_LAN=eth0
 #IFACE_WAN=eth1
 #IFACE_WAN6="ipsec0 wireguard0 he_net"

@@ -125,10 +132,10 @@ FLOWOFFLOAD=none
 INIT_APPLY_FW=1

 # firewall apply hooks
-#INIT_FW_PRE_UP_HOOK="/etc/firewall.zapret2.hook.pre_up"
-#INIT_FW_POST_UP_HOOK="/etc/firewall.zapret2.hook.post_up"
-#INIT_FW_PRE_DOWN_HOOK="/etc/firewall.zapret2.hook.pre_down"
-#INIT_FW_POST_DOWN_HOOK="/etc/firewall.zapret2.hook.post_down"
+#INIT_FW_PRE_UP_HOOK="/etc/firewall.zapret.hook.pre_up"
+#INIT_FW_POST_UP_HOOK="/etc/firewall.zapret.hook.post_up"
+#INIT_FW_PRE_DOWN_HOOK="/etc/firewall.zapret.hook.pre_down"
+#INIT_FW_POST_DOWN_HOOK="/etc/firewall.zapret.hook.post_down"

 # do not work with ipv4
 DISABLE_IPV4=0
@@ -149,4 +156,4 @@ FILTER_TTL_EXPIRED_ICMP=1

 DAEMON_LOG_ENABLE=0

-DAEMON_LOG_FILE="/tmp/zapret2+<DAEMON_NAME>+<DAEMON_IDNUM>+<DAEMON_CFGNAME>.log"
+DAEMON_LOG_FILE="/tmp/zapret+<DAEMON_NAME>+<DAEMON_IDNUM>+<DAEMON_CFGNAME>.log"
--- a/zapret2/custom.d/50-script.sh
+++ b/zapret2/custom.d/50-script.sh
@@ -3,7 +3,7 @@
 # NOTE: @ih requires nft 1.0.1+ and updated kernel version. it's confirmed to work on 5.15 (openwrt 23) and not work on 5.10 (openwrt 22)

 # can override in config :
-NFQWS_OPT_DESYNC_STUN="${NFQWS_OPT_DESYNC_STUN:---payload stun --lua-desync=fake:blob=0x00000000000000000000000000000000:repeats=2}"
+NFQWS_OPT_DESYNC_STUN="${NFQWS_OPT_DESYNC_STUN:---dpi-desync=fake --dpi-desync-repeats=2}"

 alloc_dnum DNUM_STUN4ALL
 alloc_qnum QNUM_STUN4ALL
@@ -17,14 +17,14 @@ zapret_custom_daemons()
 }
 zapret_custom_firewall()
 {
-	# $1 - 1 - run, 0 - stop
+        # $1 - 1 - run, 0 - stop

 	local f='-p udp -m u32 --u32'
 	fw_nfqws_post $1 "$f 0>>22&0x3C@4>>16=28:65535&&0>>22&0x3C@12=0x2112A442&&0>>22&0x3C@8&0xC0000003=0" "$f 44>>16=28:65535&&52=0x2112A442&&48&0xC0000003=0" $QNUM_STUN4ALL
 }
 zapret_custom_firewall_nft()
 {
-	# stop logic is not required
+        # stop logic is not required

 	local f="udp length >= 28 @ih,32,32 0x2112A442 @ih,0,2 0 @ih,30,2 0"
 	nft_fw_nfqws_post "$f" "$f" $QNUM_STUN4ALL
--- a/zapret/def-cfg.sh
+++ b/zapret/def-cfg.sh
@@ -0,0 +1,395 @@
+#!/bin/sh
+# Copyright (c) 2024 remittor
+
+function set_cfg_reset_values
+{
+	local cfgname=${1:-$ZAPRET_CFG_NAME}
+	local TAB="$( printf '\t' )"
+	uci batch <<-EOF
+		set $cfgname.config.run_on_boot='0'
+		# settings for zapret service
+		set $cfgname.config.FWTYPE='nftables'
+		set $cfgname.config.POSTNAT='1'
+		set $cfgname.config.FLOWOFFLOAD='none'
+		set $cfgname.config.INIT_APPLY_FW='1'
+		set $cfgname.config.DISABLE_IPV4='0'
+		set $cfgname.config.DISABLE_IPV6='1'
+		set $cfgname.config.FILTER_TTL_EXPIRED_ICMP='1'
+		set $cfgname.config.MODE_FILTER='hostlist'
+		set $cfgname.config.DISABLE_CUSTOM='1'
+		set $cfgname.config.WS_USER='daemon'
+		set $cfgname.config.DAEMON_LOG_ENABLE='0'
+		set $cfgname.config.DAEMON_LOG_FILE='/tmp/zapret+<DAEMON_NAME>+<DAEMON_IDNUM>+<DAEMON_CFGNAME>.log'
+		# autohostlist options
+		set $cfgname.config.AUTOHOSTLIST_RETRANS_THRESHOLD='3'
+		set $cfgname.config.AUTOHOSTLIST_FAIL_THRESHOLD='3'
+		set $cfgname.config.AUTOHOSTLIST_FAIL_TIME='60'
+		set $cfgname.config.AUTOHOSTLIST_DEBUGLOG='0'
+		# nfqws options
+		set $cfgname.config.NFQWS_ENABLE='1'
+		set $cfgname.config.DESYNC_MARK='0x40000000'
+		set $cfgname.config.DESYNC_MARK_POSTNAT='0x20000000'
+		set $cfgname.config.FILTER_MARK='$TAB'
+		set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+		set $cfgname.config.NFQWS_PORTS_UDP='443'
+		set $cfgname.config.NFQWS_TCP_PKT_OUT='9'
+		set $cfgname.config.NFQWS_TCP_PKT_IN='3'
+		set $cfgname.config.NFQWS_UDP_PKT_OUT='9'
+		set $cfgname.config.NFQWS_UDP_PKT_IN='0'
+		set $cfgname.config.NFQWS_PORTS_TCP_KEEPALIVE='0'
+		set $cfgname.config.NFQWS_PORTS_UDP_KEEPALIVE='0'
+		# save changes
+		commit $cfgname
+	EOF
+	return 0
+}
+
+function clear_nfqws_strat
+{
+	local cfgname=${1:-$ZAPRET_CFG_NAME}
+	local TAB="$( printf '\t' )"
+	uci batch <<-EOF
+		set $cfgname.config.MODE_FILTER='hostlist'
+		set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+		set $cfgname.config.NFQWS_PORTS_UDP='443'
+		set $cfgname.config.NFQWS_OPT='$TAB'
+		commit $cfgname
+	EOF
+}
+
+function set_cfg_nfqws_strat
+{
+	local strat=${1:--}
+	local cfgname=${2:-$ZAPRET_CFG_NAME}
+	local TAB="$( printf '\t' )"
+    
+	uci batch <<-EOF
+		set $cfgname.config.MODE_FILTER='hostlist'
+		commit $cfgname
+	EOF
+	if [ "$strat" = "empty" ]; then
+		clear_nfqws_strat $cfgname
+	fi
+	if [ "$strat" = "v1_by_StressOzz" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443 <HOSTLIST>
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--dpi-desync=fake,multidisorder
+				--dpi-desync-split-seqovl=681
+				--dpi-desync-split-pos=1
+				--dpi-desync-fooling=badseq
+				--dpi-desync-badseq-increment=10000000
+				--dpi-desync-repeats=2
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid,sni=fonts.google.com
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "v2_by_StressOzz" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443 <HOSTLIST>
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync=fake,fakeddisorder
+				--dpi-desync-split-pos=10,midsld
+				--dpi-desync-fake-tls=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid,sni=fonts.google.com
+				--dpi-desync-fake-tls=0x0F0F0F0F
+				--dpi-desync-fake-tls-mod=none
+				--dpi-desync-fakedsplit-pattern=/opt/zapret/files/fake/tls_clienthello_vk_com.bin
+				--dpi-desync-split-seqovl=336
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_gosuslugi_ru.bin
+				--dpi-desync-fooling=badseq,badsum
+				--dpi-desync-badseq-increment=0
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "v3_by_StressOzz" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443 <HOSTLIST>
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync=fake,fakeddisorder
+				--dpi-desync-split-pos=10,midsld
+				--dpi-desync-fake-tls=/opt/zapret/files/fake/t2.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid,sni=m.ok.ru
+				--dpi-desync-fake-tls=0x0F0F0F0F
+				--dpi-desync-fake-tls-mod=none
+				--dpi-desync-fakedsplit-pattern=/opt/zapret/files/fake/tls_clienthello_vk_com.bin
+				--dpi-desync-split-seqovl=336
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_gosuslugi_ru.bin
+				--dpi-desync-fooling=badseq,badsum
+				--dpi-desync-badseq-increment=0
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "v4_by_StressOzz" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync=fake,multisplit
+				--dpi-desync-split-pos=2,sld
+				--dpi-desync-fake-tls=0x0F0F0F0F
+				--dpi-desync-fake-tls=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid,sni=google.com
+				--dpi-desync-split-seqovl=2108
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				--dpi-desync-fooling=badseq
+				
+				--new
+				--filter-tcp=443 <HOSTLIST>
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync-any-protocol=1
+				--dpi-desync-cutoff=n5
+				--dpi-desync=multisplit
+				--dpi-desync-split-seqovl=582
+				--dpi-desync-split-pos=1
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/4pda.bin
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "v5_by_StressOzz" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--hostlist-exclude-domains=openwrt.org
+				--ip-id=zero
+				--dpi-desync=multisplit
+				--dpi-desync-split-seqovl=681
+				--dpi-desync-split-pos=1
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				
+				--new
+				--filter-tcp=443 <HOSTLIST>
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync=fake,fakeddisorder
+				--dpi-desync-split-pos=10,midsld
+				--dpi-desync-fake-tls=/opt/zapret/files/fake/max.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid
+				--dpi-desync-fake-tls=0x0F0F0F0F
+				--dpi-desync-fake-tls-mod=none
+				--dpi-desync-fakedsplit-pattern=/opt/zapret/files/fake/tls_clienthello_vk_com.bin
+				--dpi-desync-fooling=badseq,badsum
+				--dpi-desync-badseq-increment=0
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "v6_by_StressOzz" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443,2053,2083,2087,2096,8443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443,19294-19344,50000-50100'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--dpi-desync=multisplit
+				--dpi-desync-split-pos=1,sniext+1
+				--dpi-desync-split-seqovl=1
+
+				--new
+				--filter-tcp=443 <HOSTLIST>
+				--dpi-desync=hostfakesplit
+				--dpi-desync-hostfakesplit-mod=host=rzd.ru
+				--dpi-desync-hostfakesplit-midhost=host-2
+				--dpi-desync-split-seqovl=726
+				--dpi-desync-fooling=badsum,badseq
+				--dpi-desync-badseq-increment=0
+
+				--new
+				--filter-udp=443 <HOSTLIST_NOAUTO>
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+
+				--new
+				--filter-udp=19294-19344,50000-50100
+				--filter-l7=discord,stun
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+
+				--new
+				--filter-tcp=2053,2083,2087,2096,8443
+				--hostlist-domains=discord.media
+				--dpi-desync=multisplit
+				--dpi-desync-split-seqovl=652
+				--dpi-desync-split-pos=2
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "ALT7_by_Flowseal" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--hostlist-exclude-domains=openwrt.org
+				--ip-id=zero
+				--dpi-desync=multisplit
+				--dpi-desync-split-pos=2,sniext+1
+				--dpi-desync-split-seqovl=679
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				
+				--new
+				--filter-tcp=80,443 <HOSTLIST>
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync=multisplit
+				--dpi-desync-split-pos=2,sniext+1
+				--dpi-desync-split-seqovl=679
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=6
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	if [ "$strat" = "TLS_AUTO_ALT3_by_Flowseal" ]; then
+		uci batch <<-EOF
+			set $cfgname.config.NFQWS_PORTS_TCP='80,443'
+			set $cfgname.config.NFQWS_PORTS_UDP='443'
+			set $cfgname.config.NFQWS_OPT="
+				# Strategy $strat
+				
+				--filter-tcp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--hostlist-exclude-domains=openwrt.org
+				--ip-id=zero
+				--dpi-desync=fake,multisplit
+				--dpi-desync-split-seqovl=681
+				--dpi-desync-split-pos=1
+				--dpi-desync-fooling=ts
+				--dpi-desync-repeats=8
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid,sni=www.google.com
+				
+				--new
+				--filter-tcp=80,443 <HOSTLIST>
+				--hostlist-exclude-domains=openwrt.org
+				--dpi-desync=fake,multisplit
+				--dpi-desync-split-seqovl=681
+				--dpi-desync-split-pos=1
+				--dpi-desync-fooling=ts
+				--dpi-desync-repeats=8
+				--dpi-desync-split-seqovl-pattern=/opt/zapret/files/fake/tls_clienthello_www_google_com.bin
+				--dpi-desync-fake-tls-mod=rnd,dupsid,sni=www.google.com
+				
+				--new
+				--filter-udp=443
+				--hostlist=/opt/zapret/ipset/zapret-hosts-google.txt
+				--hostlist-exclude=/opt/zapret/ipset/zapret-hosts-user-exclude.txt
+				--dpi-desync=fake
+				--dpi-desync-repeats=11
+				--dpi-desync-fake-quic=/opt/zapret/files/fake/quic_initial_www_google_com.bin
+			"
+			commit $cfgname
+		EOF
+	fi
+	return 0
+}
+
+function set_cfg_default_values
+{
+	local opt_flags=${1:--}
+	local opt_strat=${2:-v6_by_StressOzz}
+	local cfgname=${3:-$ZAPRET_CFG_NAME}
+
+	if ! echo "$opt_flags" | grep -q "(skip_base)"; then
+		set_cfg_reset_values $cfgname
+	fi
+	if [ "$opt_strat" != "-" ]; then
+		set_cfg_nfqws_strat "$opt_strat" $cfgname
+	fi
+	if echo "$opt_flags" | grep -q "(set_mode_autohostlist)"; then
+		uci batch <<-EOF
+			set $cfgname.config.MODE_FILTER='autohostlist'
+			commit $cfgname
+		EOF
+	fi
+	return 0
+}
--- a/zapret2/dwc.sh
+++ b/zapret2/dwc.sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # Copyright (c) 2026 remittor

-. /opt/zapret2/comfunc.sh
+. /opt/zapret/comfunc.sh

 ZAP_TMP_DIR=/tmp/zapret_dwc

@@ -9,6 +9,9 @@ rm -rf $ZAP_TMP_DIR

 CURL_TIMEOUT=5
 CURL_RANGETO=65535
+CURL_NOCACHE='cache-control: no-cache'
+CURL_NOCACHE2='pragma: no-cache'
+CURL_USERAGENT='Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/142.0.0.0 Safari/537.36'

 if ! command -v curl >/dev/null 2>&1; then
 	echo "ERROR: package \"curl\" not installed!"
@@ -45,7 +48,7 @@ TEST_SUITE='[
  { id: "DE.AWS-01", provider: "🇩🇪 AWS", times: 1, url: "https://www.getscope.com/assets/fonts/fa-solid-900.woff2" },
  { id: "US.AWS-01", provider: "🇺🇸 AWS", times: 1, url: "https://corp.kaltura.com/wp-content/cache/min/1/wp-content/themes/airfleet/dist/styles/theme.css" },
  { id: "US.GC-01", provider: "🇺🇸 Google Cloud", times: 1, url: "https://api.usercentrics.eu/gvl/v3/en.json" },
-  { id: "US.FST-01", provider: "🇺🇸 Fastly", times: 1, url: "https://www.jetblue.com/main.c7b61d59416f714f.js" },
+  { id: "US.FST-01", provider: "🇺🇸 Fastly", times: 1, url: "https://www.jetblue.com/footer/footer-element-es2015.js" },
  { id: "CA.FST-01", provider: "🇨🇦 Fastly", times: 1, url: "https://www.cnn10.com/" },
  { id: "US.AKM-01", provider: "🇺🇸 Akamai", times: 1, url: "https://www.roxio.com/static/roxio/images/products/creator/nxt9/call-action-footer-bg.jpg" },
  { id: "PL.AKM-01", provider: "🇵🇱 Akamai", times: 1, url: "https://media-assets.stryker.com/is/image/stryker/gateway_1?$max_width_1410$" },
@@ -60,60 +63,107 @@ function trim
 	echo "$1" | sed 's/^[[:space:]]*//;s/[[:space:]]*$//'
 }

-mkdir -p $ZAP_TMP_DIR
+mkdir -p "$ZAP_TMP_DIR"

-ID=0
-while IFS='|' read -r TAG PROVIDER TIMES URL; do
+TARGET_LIST_FILE="$ZAP_TMP_DIR/targets"
+: > "$TARGET_LIST_FILE"
+IDX=0
+while IFS= read -r line; do
+	case "$line" in
+		*id:*provider:*url:*)
+			IDX=$((IDX + 1))
+			TAG=$( printf '%s\n' "$line" | cut -d'"' -f2 )
+			COUNTRY="${TAG%%.*}"
+			PROVIDER_RAW=$( printf '%s\n' "$line" | cut -d'"' -f4 )
+			PROVIDER="${PROVIDER_RAW#* }"
+			TIMES=$( printf '%s\n' "$line" | cut -d':' -f4 | cut -d',' -f1 | tr -d ' ')
+			URL=$( printf '%s\n' "$line" | cut -d'"' -f6 )
+			echo "${IDX}|${TAG}|${COUNTRY}|${PROVIDER}|${TIMES}|${URL}" >> "$TARGET_LIST_FILE"
+		;;
+	esac
+done <<EOF
+$TEST_SUITE
+EOF
+
+CURL_CON_TIMEOUT=$((CURL_TIMEOUT-2))
+CURL_SPEED_TIME=$((CURL_TIMEOUT-2))
+CURL_SPEED_LIMIT=1
+
+while IFS='|' read -r ID TAG COUNTRY PROVIDER TIMES URL; do
 	[ -z "$TAG" ] && continue
 	ID=$((ID+1))
-	ID3=$(printf '%03d' "$ID")
-	COUNTRY="$(echo "$TAG" | cut -d. -f1)"
-	CNTFLAG="$(echo "$PROVIDER" | awk '{print $1}')"
-	PROVIDER="$(echo "$PROVIDER" | cut -d' ' -f2-)"
+	ID3=$( printf '%03d' "$ID" )
+	COUNTRY=$( echo "$TAG" | cut -d. -f1 )
+	CNTFLAG=$( echo "$PROVIDER" | awk '{print $1}' )
 	URL_NO_PROTO="${URL#*://}"
 	DOMAIN="${URL_NO_PROTO%%/*}"
 	URLPATH="/${URL_NO_PROTO#*/}"
 	[ "$URLPATH" = "/$URL_NO_PROTO" ] && URLPATH="/"
-	#echo "TAG=$TAG , COUNTRY=$COUNTRY , PROVIDER=$PROVIDER , TIMES=$TIMES , URL=$URL"
+	#echo "TAG=$TAG , COUNTRY=$COUNTRY , PROVIDER=$PROVIDER , DOMAIN=$DOMAIN , URL=$URL"
+	FNAME="$ZAP_TMP_DIR/$ID3=$TAG=$PROVIDER"
 	(
-		DST_IP=$( curl -4 -s -o /dev/null -w '%{remote_ip}\n' $DOMAIN )
-		if [ -z "$DST_IP" ]; then
-			DST_IP="$( ping -c1 "$DOMAIN" 2>/dev/null | sed -n '1s/.*(\([0-9.]*\)).*/\1/p')"
+		DST_IP="???"
+		if [ "$DST_IP" = "" ]; then
+			CURL_TIMEOUTS="--connect-timeout 5 --max-time 6 --speed-time 5 --speed-limit 1"
+			#DST_IP=$( curl -4 -I -s $CURL_TIMEOUTS -o /dev/null -w '%{remote_ip}\n' "$URL" )
+			if [ -z "$DST_IP" ]; then
+				DST_IP=$( curl -4 -s $CURL_TIMEOUTS -o /dev/null -r 0-0 -w '%{remote_ip}\n' "$URL" )
+			fi
+			if [ -z "$DST_IP" ]; then
+				DST_IP="$( ping -c1 "$DOMAIN" 2>/dev/null | sed -n '1s/.*(\([0-9.]*\)).*/\1/p')"
+			fi
 		fi
-		curl -k $URL --resolve $DOMAIN:443:$DST_IP -o /dev/null -s -w '%{size_download}\n' --max-time $CURL_TIMEOUT --range 0-$CURL_RANGETO
-	) >"$ZAP_TMP_DIR/$ID3=$TAG=$PROVIDER.txt" 2>&1 &
-done <<EOF
-$(printf '%s\n' "$TEST_SUITE" | sed -n '
-s/.*id:[[:space:]]*"\([^"]*\)".*provider:[[:space:]]*"\([^"]*\)".*times:[[:space:]]*\([0-9]\+\).*url:[[:space:]]*"\([^"]*\)".*/\1|\2|\3|\4/p
-')
-EOF
+		echo "$URL" > "$FNAME.url"
+		echo "$DST_IP" > "$FNAME.ip"
+		RESOLVE_OPT="--resolve $DOMAIN:443:$DST_IP"
+		curl "$URL" \
+			--connect-timeout $CURL_CON_TIMEOUT \
+			--max-time $CURL_TIMEOUT \
+			--speed-time $CURL_SPEED_TIME \
+			--speed-limit $CURL_SPEED_LIMIT	\
+			--range 0-$CURL_RANGETO \
+			-A "$CURL_USERAGENT" \
+			-D "$FNAME.hdr" \
+			-o "$FNAME.body"
+	) > "$FNAME.txt" 2>&1 &
+done < "$TARGET_LIST_FILE"

 wait

 printf '%s\n' "$ZAP_TMP_DIR"/*.txt | sort | while IFS= read -r file; do
 	[ -f "$file" ] || continue
 	FNAME="${file##*/}"
+	FNAME="${FNAME%.txt}" 
 	ID=$( echo "$FNAME" | cut -d= -f1)
 	TAG=$( echo "$FNAME" | cut -d= -f2)
-	PROVIDER=$(echo "$FNAME" | cut -d= -f3 | sed 's/\.txt$//' )
-	res=$( cat "$file" )
-	res=$( trim "$res" )
+	PROVIDER=$(echo "$FNAME" | cut -d= -f3 )
+	FNAME="$ZAP_TMP_DIR/$FNAME"
+	BODY_SIZE=0
+	[ -f "$FNAME.body" ] && BODY_SIZE=$( wc -c < "$FNAME.body" )
 	status=
-	case "$res" in
-		''|*[!0-9]*)
-			status="Error (incorrect value)"
-			;;
-	esac
-	if [ -z "$status" ]; then
-		if [ "$res" = 0 ]; then
-			status="Possibly detected"
-		elif [ "$res" -lt $CURL_RANGETO ]; then
-			status="Failed to complete detection"
+	if [ ! -f "$FNAME.ip" ]; then
+		status="ERROR: cannot get IP-Addr"
+	elif [ ! -s "$FNAME.ip" ]; then
+		status="ERROR: cannot get ip-addr"
+	elif [ ! -f "$FNAME.hdr" ]; then
+		status="ERROR: cannot Get Headers"
+	elif [ ! -s "$FNAME.hdr" ]; then
+		status="ERROR: cannot get headers"
+	elif [ ! -f "$FNAME.body" ]; then
+		status="ERROR: cannot get body"
+	elif [ ! -s "$FNAME.body" ]; then
+		status="Possibly detected"
+	else
+		if [ "$BODY_SIZE" -le $CURL_RANGETO ]; then
+			status="Failed to complete detection (recv $BODY_SIZE bytes)"
 		else
 			status="[ OK ]"
 		fi
 	fi
 	printf '%12s / %-13s: %s \n' "$TAG" "$PROVIDER" "$status"
+	echo "$BODY_SIZE" > "$FNAME.size"
 done

+rm -f "$ZAP_TMP_DIR"/*.body >/dev/null 2>&1
+
 return 0 
--- a/zapret2/files/fake/4pda.bin
+++ b/zapret2/files/fake/4pda.bin
--- a/zapret2/files/fake/max.bin
+++ b/zapret2/files/fake/max.bin
--- a/zapret2/files/fake/t2.bin
+++ b/zapret2/files/fake/t2.bin
--- a/zapret2/files/fake/tls_clienthello_max_ru.bin
+++ b/zapret2/files/fake/tls_clienthello_max_ru.bin
--- a/zapret2/init.d.sh
+++ b/zapret2/init.d.sh
@@ -7,7 +7,7 @@ START=21

 SCRIPT_FILENAME=$1

-. /opt/zapret2/comfunc.sh
+. /opt/zapret/comfunc.sh

 if ! is_valid_config ; then
 	logger -p err -t $ZAP_LOG_TAG "Wrong main config: $ZAPRET_CONFIG"
--- a/zapret2/ipset/zapret-hosts-google.txt
+++ b/zapret2/ipset/zapret-hosts-google.txt
--- a/zapret2/ipset/zapret-hosts-user-exclude.txt
+++ b/zapret2/ipset/zapret-hosts-user-exclude.txt
--- a/zapret2/ipset/zapret-hosts-user.txt
+++ b/zapret2/ipset/zapret-hosts-user.txt
--- a/zapret2/ipset/zapret-ip-exclude.txt
+++ b/zapret2/ipset/zapret-ip-exclude.txt
--- a/zapret2/patches/0001-Add-support-log-file-for-each-daemons.patch
+++ b/zapret2/patches/0001-Add-support-log-file-for-each-daemons.patch
@@ -25,10 +25,10 @@ index 0af19c0..41c0967 100644
 			done
 		}
 	}
-diff --git a/init.d/openwrt/zapret b/init.d/openwrt/zapret2
+diff --git a/init.d/openwrt/zapret b/init.d/openwrt/zapret
 index 8d6d3a9..fcb1e91 100755
--- a/init.d/openwrt/zapret2
-+++ b/init.d/openwrt/zapret2
+--- a/init.d/openwrt/zapret
+++ b/init.d/openwrt/zapret
@@ -58,12 +58,29 @@ run_daemon()
 	# use $PIDDIR/$DAEMONBASE$1.pid as pidfile
 	local DAEMONBASE="$(basename "$2")"
@@ -51,15 +51,15 @@ index 8d6d3a9..fcb1e91 100755
 	procd_open_instance
 -	procd_set_param command $2 $3
 +	procd_set_param command $DAEMON_PATH $DAEMON_ARGS
- 	procd_set_param pidfile $PIDDIR/${DAEMONBASE}_$1.pid
+ 	procd_set_param pidfile $PIDDIR/$DAEMONBASE$1.pid
 	procd_close_instance
 }
 
 +DAEMON_CFGNAME="main"
 +
- run_nfqws()
+ run_tpws()
 {
- 	run_daemon $1 "$NFQWS2" "$NFQWS2_OPT_BASE $2"
+ 	[ "$DISABLE_IPV4" = "1" ] && [ "$DISABLE_IPV6" = "1" ] && return 0
 -- 
 2.41.0.windows.3

--- a/zapret2/renew-cfg.sh
+++ b/zapret2/renew-cfg.sh
--- a/zapret2/restore-def-cfg.sh
+++ b/zapret2/restore-def-cfg.sh
--- a/zapret2/script-exec.sh
+++ b/zapret2/script-exec.sh
--- a/zapret2/sync_config.sh
+++ b/zapret2/sync_config.sh
--- a/zapret2/uci-def-cfg.sh
+++ b/zapret2/uci-def-cfg.sh
@@ -1,9 +1,9 @@
 #!/bin/sh
 # Copyright (c) 2024 remittor

-[ ! -f /opt/zapret2/comfunc.sh ] && exit 0
+[ ! -f /opt/zapret/comfunc.sh ] && exit 0

-. /opt/zapret2/comfunc.sh
+. /opt/zapret/comfunc.sh

 mkdir -p $ZAPRET_BASE/ipset

--- a/zapret2/update-pkg.sh
+++ b/zapret2/update-pkg.sh
--- a/zapret2/Makefile
+++ b/zapret2/Makefile
@@ -1,320 +0,0 @@
-#
-# Copyright (c) 2025 remittor
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=zapret2
-PKG_VERSION:=0.8.20260113
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=bol-van
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=docs/LICENSE.txt
-
-PKG_SOURCE_URL:=https://github.com/bol-van/zapret2.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=dced388652c49fea6eb82401f79146b484a9cd7a
-PKG_SOURCE_DATE:=2026-01-13
-
-#PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-#PKG_SOURCE_URL:=https://github.com/bol-van/zapret2/archive/refs/tags/v$(PKG_VERSION).tar.gz?
-#PKG_HASH:=skip
-
-LUA_JIT?=1
-
-ifeq ($(LUA_JIT),1)
-	LUAJIT_VER?=2.1
-	LUA_VER?=5.1
-	LUA_DEPEND:=luajit
-	LUA_INCLUDE:=-I$(STAGING_DIR)/usr/include/luajit-$(LUAJIT_VER)
-	LUA_LIBRARY:=-L$(STAGING_DIR)/usr/lib -lluajit-$(LUA_VER)
-else
-	LUA_VER?=5.3
-	LUA_DEPEND:=lua$(LUA_VER)
-	LUA_INCLUDE:=-I$(STAGING_DIR)/usr/include/lua$(LUA_VER)
-	LUA_LIBRARY:=-L$(STAGING_DIR)/usr/lib -llua$(LUA_VER)
-endif
-
-include $(INCLUDE_DIR)/package.mk
-
-#TAR_OPTIONS:=--strip-components 1 $(TAR_OPTIONS)
-#TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
-
-MAKE_PATH:=nfq2
-
-define Package/$(PKG_NAME)
-	SECTION:=net
-	CATEGORY:=Network
-	TITLE:=$(PKG_NAME)
-	SUBMENU:=Zapret2
-	URL:=https://github.com/bol-van/zapret2
-	DEPENDS:= +nftables +curl +gzip +$(LUA_DEPEND)
-	DEPENDS+= +coreutils +coreutils-sort +coreutils-sleep
-	DEPENDS+= +kmod-nft-nat +kmod-nft-offload +kmod-nft-queue
-	DEPENDS+= +libnetfilter-queue +libcap +zlib
-endef
-
-define Build/Prepare
-	$(Build/Prepare/Default)
-	rm -f $(PKG_BUILD_DIR)/$(MAKE_PATH)/nfqws2
-	rm -f $(PKG_BUILD_DIR)/ip2net/ip2net
-	rm -f $(PKG_BUILD_DIR)/mdig/mdig
-endef
-
-#define Build/Configure
-#endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/$(MAKE_PATH) $(TARGET_CONFIGURE_OPTS) LUA_JIT=$(LUA_JIT) LUA_CFLAGS="$(LUA_INCLUDE)" LUA_LIB="$(LUA_LIBRARY)"
-	$(MAKE) -C $(PKG_BUILD_DIR)/ip2net $(TARGET_CONFIGURE_OPTS)
-	$(MAKE) -C $(PKG_BUILD_DIR)/mdig $(TARGET_CONFIGURE_OPTS)
-endef
-
-define Package/$(PKG_NAME)/conffiles
-/opt/zapret2/config
-/opt/zapret2/ipset/zapret-hosts-google.txt
-/opt/zapret2/ipset/zapret-hosts-user.txt
-/opt/zapret2/ipset/zapret-hosts-user-exclude.txt
-/opt/zapret2/ipset/zapret-ip-exclude.txt
-/opt/zapret2/ipset/zapret-hosts-auto.txt
-/opt/zapret2/init.d/openwrt/custom.d/10-script.sh
-/opt/zapret2/init.d/openwrt/custom.d/20-script.sh
-/opt/zapret2/init.d/openwrt/custom.d/50-script.sh
-/opt/zapret2/init.d/openwrt/custom.d/60-script.sh
-/opt/zapret2/init.d/openwrt/custom.d/90-script.sh
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/opt/zapret2
-	$(INSTALL_DIR) $(1)/opt/zapret2/$(MAKE_PATH)
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(MAKE_PATH)/nfqws2 $(1)/opt/zapret2/$(MAKE_PATH)/
-	$(INSTALL_DIR) $(1)/opt/zapret2/ip2net
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ip2net/ip2net $(1)/opt/zapret2/ip2net/
-	$(INSTALL_DIR) $(1)/opt/zapret2/mdig
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mdig/mdig $(1)/opt/zapret2/mdig/
-	$(INSTALL_DIR) $(1)/opt/zapret2/common
-	$(CP) $(PKG_BUILD_DIR)/common/* $(1)/opt/zapret2/common/
-	$(INSTALL_DIR) $(1)/opt/zapret2/lua
-	$(CP) $(PKG_BUILD_DIR)/lua/* $(1)/opt/zapret2/lua/
-	#$(INSTALL_DIR) $(1)/opt/zapret2/docs
-	#$(CP) $(PKG_BUILD_DIR)/docs/* $(1)/opt/zapret2/docs/
-	$(INSTALL_DIR) $(1)/opt/zapret2/files
-	$(CP) $(PKG_BUILD_DIR)/files/* $(1)/opt/zapret2/files/
-	$(CP)                ./files/* $(1)/opt/zapret2/files/
-	$(INSTALL_DIR) $(1)/opt/zapret2/ipset
-	$(CP) $(PKG_BUILD_DIR)/ipset/* $(1)/opt/zapret2/ipset/
-	$(INSTALL_DIR) $(1)/opt/zapret2/blockcheck2.d
-	$(CP) $(PKG_BUILD_DIR)/blockcheck2.d/* $(1)/opt/zapret2/blockcheck2.d/
-	$(INSTALL_BIN)  $(PKG_BUILD_DIR)/blockcheck2.sh  $(1)/opt/zapret2/blockcheck2.sh
-	#$(INSTALL_DATA) $(PKG_BUILD_DIR)/config.default $(1)/opt/zapret2/config.default
-	$(INSTALL_DIR) $(1)/opt/zapret2/tmp
-	$(INSTALL_DIR) $(1)/opt/zapret2/init.d/openwrt
-	$(CP) $(PKG_BUILD_DIR)/init.d/openwrt/* $(1)/opt/zapret2/init.d/openwrt/
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init.d/openwrt/90-zapret2 $(1)/etc/hotplug.d/iface/90-zapret2
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./init.d.sh $(1)/etc/init.d/zapret2
-	$(INSTALL_DATA) ./config.default $(1)/opt/zapret2/config.default
-	$(INSTALL_DATA) ./config.default $(1)/opt/zapret2/config
-	$(INSTALL_DATA) ./ipset/zapret-hosts-google.txt       $(1)/opt/zapret2/ipset/zapret-hosts-google.txt
-	$(INSTALL_DATA) ./ipset/zapret-hosts-user.txt         $(1)/opt/zapret2/ipset/zapret-hosts-user.txt
-	$(INSTALL_DATA) ./ipset/zapret-hosts-user-exclude.txt $(1)/opt/zapret2/ipset/zapret-hosts-user-exclude.txt
-	$(INSTALL_DATA) ./ipset/zapret-ip-exclude.txt         $(1)/opt/zapret2/ipset/zapret-ip-exclude.txt
-	$(INSTALL_DIR) $(1)/opt/zapret2/ipset_def
-	$(INSTALL_DATA) ./ipset/zapret-hosts-google.txt       $(1)/opt/zapret2/ipset_def/zapret-hosts-google.txt
-	$(INSTALL_DATA) ./ipset/zapret-hosts-user.txt         $(1)/opt/zapret2/ipset_def/zapret-hosts-user.txt
-	$(INSTALL_DATA) ./ipset/zapret-hosts-user-exclude.txt $(1)/opt/zapret2/ipset_def/zapret-hosts-user-exclude.txt
-	$(INSTALL_DATA) ./ipset/zapret-ip-exclude.txt         $(1)/opt/zapret2/ipset_def/zapret-ip-exclude.txt
-	$(INSTALL_DIR) $(1)/opt/zapret2/init.d
-	$(INSTALL_DIR) $(1)/opt/zapret2/init.d/openwrt
-	$(INSTALL_DIR) $(1)/opt/zapret2/init.d/openwrt/custom.d
-	$(CP) ./custom.d/* $(1)/opt/zapret2/init.d/openwrt/custom.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./uci-def-cfg.sh     $(1)/etc/uci-defaults/zapret2-uci-def-cfg.sh
-	# install all sh-scripts
-	$(CP) ./*.sh $(1)/opt/zapret2/
-	rm -f $(1)/opt/zapret2/init.d.sh
-	# Create empty conf files
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/ipset/zapret-hosts-auto.txt
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/ipset/cust1.txt
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/ipset/cust2.txt
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/ipset/cust3.txt
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/ipset/cust4.txt
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/init.d/openwrt/custom.d/10-script.sh
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/init.d/openwrt/custom.d/20-script.sh
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/init.d/openwrt/custom.d/60-script.sh
-	$(INSTALL_DATA) /dev/null $(1)/opt/zapret2/init.d/openwrt/custom.d/90-script.sh
-	# Fix permissions
-	chmod 644 $(1)/opt/zapret2/ipset/*.txt
-	chmod 644 $(1)/opt/zapret2/ipset_def/*.txt
-	chmod 644 $(1)/opt/zapret2/init.d/openwrt/custom.d/*.sh
-	chmod 644 $(1)/opt/zapret2/config*
-	chmod 755 $(1)/opt/zapret2/*.sh
-	chmod 755 $(1)/opt/zapret2/$(MAKE_PATH)/*
-	chmod 755 $(1)/opt/zapret2/ip2net/*
-	chmod 755 $(1)/opt/zapret2/mdig/*
-endef
-
-define Package/$(PKG_NAME)/preinst
-#!/bin/sh
-# check if we are on real system
-if [ -z "$${IPKG_INSTROOT}" ]; then
-	ZAPRET_DIR=/opt/zapret2
-	ZAPRET_INITD=/etc/init.d/zapret2
-	ZAPRET_CFG=/etc/config/zapret2
-	if [ -f "$${ZAPRET_INITD}" ]; then
-		SCRIPT=$$( readlink "$${ZAPRET_INITD}" )
-		if [ -n "$${SCRIPT}" ]; then
-			echo "Please uninstall incompatible \"zapret2\" service!"
-			exit 44
-		fi
-	fi
-	if command -v apk >/dev/null; then
-		PKG_MGR="apk"
-		PKG_CHECK="apk info -e "
-		PKG_REMOVE="apk del --force "
-	else
-		PKG_MGR="opkg"
-		PKG_CHECK="opkg status "
-		PKG_REMOVE="opkg remove --force-remove "
-	fi
-	if [ "$${PKG_UPGRADE}" = "1" ]; then
-		# stop service if PKG_UPGRADE
-		if [ -x "$${ZAPRET_INITD}" ]; then
-			$${ZAPRET_INITD} running && $${ZAPRET_INITD} stop >/dev/null 2>&1
-		fi
-	fi
-	if $${PKG_CHECK} zapret2 >/dev/null 2>&1; then
-		if [ ! -f "/opt/zapret2/sync_config.sh" ]; then
-			echo "Please uninstall incompatible \"zapret2\" package!"
-			exit 47
-		fi
-		if [ -f "$${ZAPRET_CFG}" ] && ! grep -q "run_on_boot" "$${ZAPRET_CFG}"; then
-			echo "Please uninstall incompatible \"zapret2\" package!"
-			exit 48
-		fi
-	fi
-	if $${PKG_CHECK} luci-app-zapret2 >/dev/null 2>&1; then
-		SVC_FILE=/www/luci-static/resources/view/zapret2/service.js
-		if [ ! -f "$${SVC_FILE}" ] || ! grep -Fq "/remittor/zapret-openwrt" "$${SVC_FILE}"; then
-			echo "Please uninstall incompatible \"luci-app-zapret2\" package!"
-			exit 55
-		fi
-	fi
-	if [ -f "$${ZAPRET_CFG}" ] && ! grep -q "run_on_boot" "$${ZAPRET_CFG}"; then
-		if [ -x "$${ZAPRET_INITD}" ]; then
-			$${ZAPRET_INITD} running && $${ZAPRET_INITD} stop >/dev/null 2>&1
-		fi
-		rm -f $${ZAPRET_CFG}
-		rm -f $${ZAPRET_INITD}
-		[ -d "$${ZAPRET_DIR}" ] && rm -rf $${ZAPRET_DIR}
-		echo "All files of the previously installed package have been removed!"
-	fi
-	if $${PKG_CHECK} zapret2-mdig >/dev/null 2>&1; then
-		$${PKG_REMOVE} zapret2-mdig
-	fi
-	if $${PKG_CHECK} zapret2-ip2net >/dev/null 2>&1; then
-		$${PKG_REMOVE} zapret2-ip2net
-	fi
-	if [ ! -d "$${ZAPRET_DIR}" ]; then
-		mkdir -p $${ZAPRET_DIR}
-	fi
-fi
-exit 0
-endef
-
-define Package/$(PKG_NAME)/postinst
-#!/bin/sh
-# check if we are on real system
-if [ -z "$${IPKG_INSTROOT}" ]; then
-	ZAPRET_DIR=/opt/zapret2
-	ZAPRET_INITD=/etc/init.d/zapret2
-	ZAPRET_CFG=/etc/config/zapret2
-	ZAPRET_CONFIG=/opt/zapret2/config
-	ZAPRET_CONFIG_DEF="/opt/zapret2/config.default"
-	# Fix permissions
-	chmod 644 $${ZAPRET_CFG} >/dev/null 2>&1
-	chmod 644 $${ZAPRET_DIR}/ipset/*.txt >/dev/null 2>&1
-	chmod 644 $${ZAPRET_DIR}/ipset_def/*.txt >/dev/null 2>&1
-	chmod 644 $${ZAPRET_DIR}/init.d/openwrt/custom.d/*.sh >/dev/null 2>&1
-	chmod 644 $${ZAPRET_DIR}/config* >/dev/null 2>&1
-	# creating main config if its not exists
-	if [ ! -f "$${ZAPRET_CONFIG}" ]; then
-		cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
-	fi
-	# remove fake uci-config
-	[ -f "$${ZAPRET_CFG}" ] && [ ! -s "$${ZAPRET_CFG}" ] && rm -f "$${ZAPRET_CFG}"
-	# check existing uci-config
-	[ -f "$${ZAPRET_CFG}" ] && ZAPRET_CFG_EXISTS=1 || ZAPRET_CFG_EXISTS=0
-	# create or merge uci-config
-	/opt/zapret2/uci-def-cfg.sh
-	[ "$${ZAPRET_CFG_EXISTS}" = "1" ] && echo "Config /etc/config/zapret2 merged with default uci-config"
-	# remove uci-default script from system dir (used into /etc/init.d/boot)
-	rm -f /etc/uci-defaults/zapret2-uci-def-cfg.sh
-	# copy (sync) all params from uci-config to main config
-	/opt/zapret2/sync_config.sh
-	# check main config
-	sh -n "$${ZAPRET_CONFIG}" 2>/dev/null || cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
-	sh -n "$${ZAPRET_CONFIG}" 2>/dev/null || exit 58
-	# enable main service
-	$${ZAPRET_INITD} enable
-	# stop all
-	$${ZAPRET_INITD} stop_fw >/dev/null 2>&1
-	$${ZAPRET_INITD} stop_daemons >/dev/null 2>&1
-	ps w | grep '/opt/zapret2/nfq2/nfqws2' | grep -v grep | awk '{print $$1}' | xargs -r kill -9
-	# start main service
-	$${ZAPRET_INITD} start
-	# restart firewall
-	[ -x /sbin/fw4 ] && fw4 -q restart || fw3 -q restart
-fi
-exit 0
-endef
-
-define Package/$(PKG_NAME)/prerm
-#!/bin/sh
-# check if we are on real system
-if [ -z "$${IPKG_INSTROOT}" ]; then
-	ZAPRET_DIR=/opt/zapret2
-	ZAPRET_BASE=/opt/zapret2
-	ZAPRET_INITD=/etc/init.d/zapret2
-	ZAPRET_CFG=/etc/config/zapret2
-	ZAPRET_CONFIG=/opt/zapret2/config
-	ZAPRET_CONFIG_DEF="/opt/zapret2/config.default"
-	OPENWRT_FW_INCLUDE=/etc/firewall.zapret2
-	# check main config
-	sh -n "$${ZAPRET_CONFIG}" 2>/dev/null || cp -f "$${ZAPRET_CONFIG_DEF}" "$${ZAPRET_CONFIG}"
-	if ! sh -n "$${ZAPRET_CONFIG}" 2>/dev/null ; then
-		ps w | grep '/opt/zapret2/nfq2/nfqws2' | grep -v grep | awk '{print $$1}' | xargs -r kill -9
-		exit 0
-	fi
-	. "$${ZAPRET_CONFIG}"
-	. "$${ZAPRET_BASE}/common/base.sh"
-	. "$${ZAPRET_BASE}/common/fwtype.sh"
-	. "$${ZAPRET_BASE}/common/nft.sh"
-	. "$${ZAPRET_BASE}/common/installer.sh"
-	$${ZAPRET_INITD} running && $${ZAPRET_INITD} stop >/dev/null 2>&1
-	$${ZAPRET_INITD} disable >/dev/null 2>&1
-	ps w | grep '/opt/zapret2/nfq2/nfqws2' | grep -v grep | awk '{print $$1}' | xargs -r kill -9
-	remove_openwrt_firewall
-	nft_del_table
-	restart_openwrt_firewall
-fi
-exit 0
-endef
-
-define Package/$(PKG_NAME)/postrm
-#!/bin/sh
-# check if we are on real system
-if [ -z "$${IPKG_INSTROOT}" ]; then
-	rm -f /etc/config/zapret2-opkg*
-	rm -f /etc/config/zapret2.opkg*
-	rm -f /etc/config/zapret2.apk*
-	[ -f "/opt/zapret2/config" ] && cp -f /opt/zapret2/config "/opt/zapret2/config.backup"
-	#rm -rf /opt/zapret2
-	#echo "Directory /opt/zapret2 removed!"
-fi
-exit 0
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))
--- a/zapret2/def-cfg.sh
+++ b/zapret2/def-cfg.sh
@@ -1,185 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2025 remittor
-
-function set_cfg_reset_values
-{
-	local cfgname=${1:-$ZAPRET_CFG_NAME}
-	local TAB="$( printf '\t' )"
-	uci batch <<-EOF
-		set $cfgname.config.run_on_boot='0'
-		# settings for zapret service
-		set $cfgname.config.FWTYPE='nftables'
-		set $cfgname.config.POSTNAT='1'
-		set $cfgname.config.FLOWOFFLOAD='none'
-		set $cfgname.config.INIT_APPLY_FW='1'
-		set $cfgname.config.DISABLE_IPV4='0'
-		set $cfgname.config.DISABLE_IPV6='1'
-		set $cfgname.config.FILTER_TTL_EXPIRED_ICMP='1'
-		set $cfgname.config.MODE_FILTER='hostlist'
-		set $cfgname.config.DISABLE_CUSTOM='1'
-		set $cfgname.config.WS_USER='daemon'
-		set $cfgname.config.DAEMON_LOG_ENABLE='0'
-		set $cfgname.config.DAEMON_LOG_FILE='/tmp/zapret2+<DAEMON_NAME>+<DAEMON_IDNUM>+<DAEMON_CFGNAME>.log'
-		# autohostlist options
-		set $cfgname.config.AUTOHOSTLIST_INCOMING_MAXSEQ='4096'
-		set $cfgname.config.AUTOHOSTLIST_RETRANS_MAXSEQ='32768'
-		set $cfgname.config.AUTOHOSTLIST_RETRANS_RESET='1'
-		set $cfgname.config.AUTOHOSTLIST_RETRANS_THRESHOLD='3'
-		set $cfgname.config.AUTOHOSTLIST_FAIL_THRESHOLD='3'
-		set $cfgname.config.AUTOHOSTLIST_FAIL_TIME='60'
-		set $cfgname.config.AUTOHOSTLIST_UDP_IN='1'
-		set $cfgname.config.AUTOHOSTLIST_UDP_OUT='4'
-		set $cfgname.config.AUTOHOSTLIST_DEBUGLOG='0'
-		# nfqws options
-		set $cfgname.config.NFQWS2_ENABLE='1'
-		set $cfgname.config.DESYNC_MARK='0x40000000'
-		set $cfgname.config.DESYNC_MARK_POSTNAT='0x20000000'
-		set $cfgname.config.FILTER_MARK='$TAB'
-		set $cfgname.config.NFQWS2_PORTS_TCP='80,443'
-		set $cfgname.config.NFQWS2_PORTS_UDP='443'
-		set $cfgname.config.NFQWS2_TCP_PKT_OUT='20'
-		set $cfgname.config.NFQWS2_TCP_PKT_IN='10'
-		set $cfgname.config.NFQWS2_UDP_PKT_OUT='5'
-		set $cfgname.config.NFQWS2_UDP_PKT_IN='3'
-		set $cfgname.config.NFQWS2_PORTS_TCP_KEEPALIVE='0'
-		set $cfgname.config.NFQWS2_PORTS_UDP_KEEPALIVE='0'
-		# save changes
-		commit $cfgname
-	EOF
-	return 0
-}
-
-function clear_nfqws_strat
-{
-	local cfgname=${1:-$ZAPRET_CFG_NAME}
-	local TAB="$( printf '\t' )"
-	uci batch <<-EOF
-		set $cfgname.config.MODE_FILTER='hostlist'
-		set $cfgname.config.NFQWS2_PORTS_TCP='80,443'
-		set $cfgname.config.NFQWS2_PORTS_UDP='443'
-		set $cfgname.config.NFQWS2_OPT='$TAB'
-		commit $cfgname
-	EOF
-}
-
-function set_cfg_nfqws_strat
-{
-	local strat=${1:--}
-	local cfgname=${2:-$ZAPRET_CFG_NAME}
-	local TAB="$( printf '\t' )"
-    
-	uci batch <<-EOF
-		set $cfgname.config.MODE_FILTER='hostlist'
-		commit $cfgname
-	EOF
-	if [ "$strat" = "empty" ]; then
-		clear_nfqws_strat $cfgname
-	fi
-	if [ "$strat" = "default" ]; then
-		uci batch <<-EOF
-			set $cfgname.config.NFQWS2_PORTS_TCP='80,443'
-			set $cfgname.config.NFQWS2_PORTS_UDP='443'
-			set $cfgname.config.NFQWS2_OPT="
-				# Strategy $strat
-				
-				--filter-tcp=80
-				--filter-l7=http <HOSTLIST>
-				--payload=http_req
-				--lua-desync=fake:blob=fake_default_http:tcp_md5
-				--lua-desync=multisplit:pos=method+2
-				
-				--new
-				--filter-tcp=443
-				--filter-l7=tls <HOSTLIST>
-				--payload=tls_client_hello
-				--lua-desync=fake:blob=fake_default_tls:tcp_md5:tcp_seq=-10000
-				--lua-desync=multidisorder:pos=1,midsld
-				
-				--new
-				--filter-udp=443
-				--filter-l7=quic <HOSTLIST_NOAUTO>
-				--payload=quic_initial
-				--lua-desync=fake:blob=fake_default_quic:repeats=6
-			"
-			commit $cfgname
-		EOF
-	fi
-	if [ "$strat" = "v1_by_Schiz23" ]; then
-		uci batch <<-EOF
-			set $cfgname.config.NFQWS2_PORTS_TCP='80,443'
-			set $cfgname.config.NFQWS2_PORTS_UDP='443'
-			set $cfgname.config.NFQWS2_OPT="
-				# Strategy $strat
-				
-				--filter-tcp=80
-				--filter-l7=http <HOSTLIST>
-				--payload=http_req
-				--lua-desync=fake:blob=fake_default_http:tcp_md5
-				--lua-desync=multisplit:pos=method+2
-				
-				--new
-				--filter-tcp=443
-				--filter-l7=tls <HOSTLIST>
-				--lua-desync=fake:blob=fake_default_tls:ip_ttl=1:ip6_ttl=1:tls_mod=rnd,rndsni,padencap
-				--lua-desync=multidisorder:payload=tls_client_hello:pos=3
-				
-				--new
-				--filter-udp=443
-				--filter-l7=quic <HOSTLIST_NOAUTO>
-				--lua-desync=fake:blob=fake_default_quic:repeats=11:payload=all:out_range=-d10
-			"
-			commit $cfgname
-		EOF
-	fi
-	if [ "$strat" = "v2_by_Schiz23" ]; then
-		uci batch <<-EOF
-			set $cfgname.config.NFQWS2_PORTS_TCP='80,443'
-			set $cfgname.config.NFQWS2_PORTS_UDP='443'
-			set $cfgname.config.NFQWS2_OPT="
-				# Strategy $strat
-				
-				--filter-tcp=80
-				--filter-l7=http <HOSTLIST>
-				--payload=http_req
-				--lua-desync=fake:blob=fake_default_http:tcp_md5
-				--lua-desync=multisplit:pos=method+2
-				
-				--new
-				--filter-tcp=443
-				--filter-l7=tls <HOSTLIST>
-				--payload=tls_client_hello
-				--lua-desync=multidisorder:payload=tls_client_hello:pos=100,midsld,sniext+1,endhost-2,-10
-				--lua-desync=send:sni=.microsoft
-				
-				--new
-				--filter-udp=443
-				--filter-l7=quic <HOSTLIST_NOAUTO>
-				--payload=quic_initial
-				--lua-desync=fake:blob=fake_default_quic:repeats=4
-			"
-			commit $cfgname
-		EOF
-	fi
-	return 0
-}
-
-function set_cfg_default_values
-{
-	local opt_flags=${1:--}
-	local opt_strat=${2:-default}
-	local cfgname=${3:-$ZAPRET_CFG_NAME}
-
-	if ! echo "$opt_flags" | grep -q "(skip_base)"; then
-		set_cfg_reset_values $cfgname
-	fi
-	if [ "$opt_strat" != "-" ]; then
-		set_cfg_nfqws_strat "$opt_strat" $cfgname
-	fi
-	if echo "$opt_flags" | grep -q "(set_mode_autohostlist)"; then
-		uci batch <<-EOF
-			set $cfgname.config.MODE_FILTER='autohostlist'
-			commit $cfgname
-		EOF
-	fi
-	return 0
-}
Author	SHA1	Message	Date
remittor	a18d45190e	Bump version to v72.20260114	2026-01-14 22:02:51 +03:00
remittor	217b105b7b	dwc: Rewrite code and restore US.AWS-01 (kaltura.com)	2026-01-14 22:01:23 +03:00
remittor	0d6ba6e657	comfunc: Fix recreating crontab log cleaning task on restart PR: `ad6b23f4aa`	2026-01-13 21:41:33 +03:00
remittor	bc518190d2	luci: Fix show NFQWS_OPT	2026-01-13 21:33:24 +03:00
remittor	d02391a0e3	dwc: Remove US.AWS-01 (kaltura.com) This site required JS-challenge	2026-01-13 17:02:29 +03:00
remittor	3c2f472b78	Bump version to v72.20260113	2026-01-13 13:50:44 +03:00
remittor	39c4fd6279	makefile: Fix postinst section	2026-01-13 13:49:52 +03:00
remittor	91ec462bcf	confunc: Fix function restore_all_ipset_cfg	2026-01-13 13:37:06 +03:00
remittor	015bf4befe	luci: Add description for "Diagnostics" button	2026-01-13 13:34:25 +03:00
remittor	75ccdb6a1b	makefile: Fix conffiles section	2026-01-13 13:24:47 +03:00
remittor	98c5d5b0ed	Replace echo to printf for TAB symbol	2026-01-13 12:46:04 +03:00
remittor	cf7661f2b9	config: Fix sync for AUTOHOSTLIST_RETRANS_RESET	2026-01-13 12:24:50 +03:00
remittor	4327f98bb7	Fix uci-def-cfg.sh	2026-01-13 12:19:11 +03:00
remittor	694716a512	github: releases: Add step "Wait for GitHub API consistency"	2026-01-12 22:45:19 +03:00
remittor	be1027dfd7	makefile: Fix preinst section (check for incompatible packages)	2026-01-12 15:15:21 +03:00
remittor	0edcc6c4a0	makefile: Disable TPWS in blockcheck	2026-01-12 13:27:53 +03:00
remittor	a71965b382	diag: Fix bugs in dwc.sh	2026-01-11 19:08:35 +03:00
remittor	d45d07df82	makefile: Add remove packages mdig and ip2net	2026-01-11 18:41:34 +03:00
remittor	f4a68178b7	makefile: skip init.d.sh	2026-01-11 16:09:48 +03:00
remittor	32c6f9cfc3	Bump version to v72.20260111	2026-01-11 15:28:00 +03:00
remittor	6660ea0a20	Add diagnostic button (DPI checker)	2026-01-11 15:27:48 +03:00
remittor	5f470e8f82	ipset: Update zapret-hosts-user-exclude.txt	2026-01-11 15:05:53 +03:00
remittor	d6304e6e24	build: Fix matrix for riscv64 arch	2026-01-11 15:05:10 +03:00
remittor	f0cc13fb38	config: Fix "<" and ">" symbols for v6 strategy	2026-01-11 10:20:27 +03:00
remittor	486475f817	luci: updater: Add new func tools.execAndRead	2026-01-10 20:54:11 +03:00
remittor	969029c0db	luci: Fix update text after edit for NFQWS_OPT	2026-01-10 10:56:47 +03:00
remittor	879ffa217d	luci: Fix js-files for unification	2026-01-09 22:29:47 +03:00
remittor	4f5dd5a019	luci: Splitting file tools.js into two parts (add file env.js)	2026-01-09 22:00:05 +03:00
remittor	349ead377a	build: Rewrite build script (using OpenWrt SDK from github)	2026-01-09 17:42:21 +03:00
remittor	c7616b468b	Replace "founded" to "found"	2026-01-09 17:36:38 +03:00
remittor	bb5647568e	updater: Fix pkg_mgr_update for opkg	2026-01-09 10:31:33 +03:00
remittor	40a3605034	Bump version to v72.20260108	2026-01-08 19:57:07 +03:00
remittor	3227458422	readme: Update link to instructions	2026-01-08 19:38:51 +03:00
remittor	54fdbe4d5e	updater: Add support install packages on clean OpenWrt Example: ./update-pkg.sh -u 1 Example: ./update-pkg.sh -u 2	2026-01-08 18:33:18 +03:00
remittor	b714b629b7	Integrate mdig and ip2net to main package	2026-01-01 12:27:28 +03:00
remittor	354a71f6c5	Remove tpws, mdig, ip2net packages	2026-01-01 12:22:58 +03:00
remittor	f48488b21b	updater: Change get_actual_release error 1 to 150	2025-12-30 13:39:18 +03:00
remittor	a3c256c31a	zapret: Global use of dynamic variables	2025-12-29 21:09:35 +03:00
remittor	1d2d3c4b84	luci: updater: Skip error -32000	2025-12-29 19:36:12 +03:00
remittor	5b6fd0a1e6	updater: Fix get_pkg_version for OpenWrt 25	2025-12-29 18:34:31 +03:00
remittor	791ea2d2b6	github: issue: Add help_wanted templates	2025-12-27 11:28:18 +03:00
remittor	9d73b59640	Bump version to v72.20251227	2025-12-27 11:27:41 +03:00
remittor	b58cbafec6	updater: Fix luci package name	2025-12-27 11:27:05 +03:00
remittor	a56b1e3f1c	luci: tools: Fix save changes into modal dialog for NFQWS_OPT	2025-12-27 10:29:21 +03:00
remittor	80f15e3da1	def-cfg: Add new strategy v6_by_StressOzz	2025-12-27 10:25:54 +03:00
remittor	89bcec8a60	updater: Fix files renaming	2025-12-26 15:45:20 +03:00
remittor	735575c7bc	updater: Update func download_releases_info	2025-12-26 08:57:31 +03:00
remittor	5550820fdc	Bump version to v72.20251225-r2	2025-12-25 18:04:53 +03:00
remittor	0e8366f7d1	luci: tools: Fix show and close modal dialog for NFQWS_OPT	2025-12-25 18:02:11 +03:00
remittor	ea3c774537	updater: Fix find base package after ZIP unpack	2025-12-25 14:57:36 +03:00
remittor	57b7e65532	github: Fix bug_report.yml	2025-12-25 12:01:27 +03:00
remittor	eeacc486f9	Add ISSUE_TEMPLATE	2025-12-25 11:52:35 +03:00
remittor	101382faf7	Bump version to v72.20251225	2025-12-25 08:58:38 +03:00
remittor	21229ef152	def-cfg: Add strategies by Flowseal (ALT7 + TLS_AUTO_ALT3)	2025-12-25 08:54:40 +03:00
remittor	9aaf2b29e3	fake: Add TLS 1.3 hello from max.ru	2025-12-25 08:25:26 +03:00
remittor	246f4a08a0	luci: tools: Fix close modal dialog for NFQWS_OPT	2025-12-24 18:50:48 +03:00
remittor	3d3eb82b7b	luci: updater: Fix timer using	2025-12-24 14:39:52 +03:00
remittor	8aff441b88	luci: tools: Fix close modal dialog for NFQWS_OPT	2025-12-23 14:14:07 +03:00
remittor	1c866d5de1	comfunc: Fix remove debug log	2025-12-20 10:11:18 +03:00
remittor	57d5ab5060	Bump version to v72.20251219	2025-12-19 11:17:04 +03:00
remittor	5a685cfa27	updater: Add check for unzip installed	2025-12-19 11:11:47 +03:00
remittor	21017047a8	updater: Fix parsing package version (APK)	2025-12-19 10:22:54 +03:00