mirror of
https://github.com/sle118/squeezelite-esp32.git
synced 2025-12-06 11:36:59 +03:00
ea873ae3bc
Music plays, httpd responds in a snap, messaging subsystem works, full end-to-end flash erase/flash/configure wifi & hardware/reboot to squeezelite was tested. CMake system works well: it now allows to flash in a single command (assuming esp-idf V4.0 is properly installed on the system) with the standard line: idf.py flash -p <comport> this makes building and flashing the app less confusing for new developers/users wanting to experiment
476 B
476 B
| 1 | # Name, Type, SubType, Offset, Size, Flags |
|---|---|
| 2 | # Note: if you change the phy_init or app partition offset, make sure to change the offset in Kconfig.projbuild |
| 3 | nvs, data, nvs, 0x9000, 0x4000, |
| 4 | otadata, data, ota, 0xD000, 0x2000, |
| 5 | phy_init, data, phy, 0xF000, 0x1000, |
| 6 | recovery, app, factory, 0x10000, 0x140000, |
| 7 | ota_0, app, ota_0, , 0x2A0000, |
| 8 | #ota_0, app, ota_0, 0x10000, 0x140000, |
| 9 | #recovery, app, factory, , 0x2A0000, |
| 10 | settings, data, nvs, , 0x10000, |