force pad_select for gpio use in dac_controlset - release

CHANGELOG

@@ -1,3 +1,9 @@
+2023-11-09
+ - force gpio_pad_select_gpio in dac_controlset in case somebody uses UART gpio's (or other pre-programmed)
+ 
+2023-11-08
+ - execute dac_controlset even whne there is no i2s (for gpio)
+ 
 2023-11-07
  - led-vu gain + misc fixes
  - bump plugin version to 0.600

README.md

@@ -189,13 +189,19 @@ if "model" is not set or is not recognized, then default "I2S" is used. The opti
 
 So far, TAS57xx, TAS5713, AC101, WM8978 and ES8388 are recognized models where the proper init sequence/volume/power controls are sent. For other codecs that might require an I2C commands, please use the parameter "dac_controlset" that allows definition of simple commands to be sent over i2c for init, power, speaker and headset on and off using a JSON syntax:
 ```json
-{ <command>: [ {"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"}, ... {{"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"} ],
-  <command>: [ {"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"}, ... {{"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"} ],
+{ <command>: [ <item1>, <item2>, ... <item3> ],
+  <command>: [ <item1>, <item2>, ... <item3> ],
   ... }
 ```
-Where `<command>` is one of init, poweron, poweroff, speakeron, speakeroff, headseton, headsetoff
+Where `<command>` is one of init, poweron, poweroff, speakeron, speakeroff, headseton, headsetoff (it **must** be an array even for a single item). Item is any of the following elements
+```
+{"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"}
+{"gpio":<gpio>,"level":0|1}
+{"delay":<ms>}
+```
+This is standard JSON notation, so if you are not familiar with it, Google is your best friend. Be aware that the '...' means you can have as many entries as you want, it's not part of the syntax. Every section is optional, but it does not make sense to set i2c in the 'dac_config' parameter and not setting anything here. 
 
-This is standard JSON notation, so if you are not familiar with it, Google is your best friend. Be aware that the '...' means you can have as many entries as you want, it's not part of the syntax. Every section is optional, but it does not make sense to set i2c in the 'dac_config' parameter and not setting anything here. The parameter 'mode' allows to *or* the register with the value or to *and* it. Don't set 'mode' if you simply want to write. The 'val parameter can be an array [v1, v2,...] to write a serie of bytes in a single i2c burst (in that case 'mode' is ignored). **Note that all values must be decimal**. You can use a validator like [this](https://jsonlint.com) to verify your syntax
+The `reg` key allow to write registers on i2c bus. The parameter `mode` allows to *or* the register with the value or to *and* it. Don't set `mode` if you simply want to write. The `val` parameter can be an array [v1, v2,...] to write a serie of bytes in a single i2c burst (in that case 'mode' is ignored). **Note that all values must be decimal**. You can use a validator like [this](https://jsonlint.com) to verify your syntax. The `gpio` key is simply to set a gpio as part of DAC action and `delay` allows a pause between elements.
 
 The 'power' command is used when powering on/off the DAC after the idle period (see -C option of squeezelite) and the 'speaker/headset' commands are sent when switching between speakers and headsets (see headset jack detection).
 

components/squeezelite/external/dac_external.c

@@ -61,7 +61,6 @@ static bool init(char *config, int i2c_port_num, i2s_config_t *i2s_config, bool
 	char *p;	
 	
 	i2c_addr = adac_init(config, i2c_port_num);
-	if (!i2c_addr) return true;
 	
 	ESP_LOGI(TAG, "DAC on I2C @%d", i2c_addr);
 	
@@ -137,6 +136,7 @@ bool i2c_json_execute(char *set) {
         if ((action = cJSON_GetObjectItemCaseSensitive(item, "gpio")) != NULL) {
             cJSON *level = cJSON_GetObjectItemCaseSensitive(item, "level");
             ESP_LOGI(TAG, "set GPIO %d at %d", action->valueint, level->valueint);
+            if (action->valueint < GPIO_NUM_MAX) gpio_pad_select_gpio(action->valueint);
             gpio_set_direction_x(action->valueint, GPIO_MODE_OUTPUT);
             gpio_set_level_x(action->valueint, level->valueint);
             continue;

components/wifi-manager/webapp/dist/src/js/test.d.ts

@@ -70,6 +70,8 @@ declare function getStatus(): {};
 declare function getStatus(): {};
 declare function getStatus(): {};
 declare function getStatus(): {};
+declare function getStatus(): {};
+declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
@@ -214,6 +216,7 @@ declare function pushStatus(): void;
 declare function pushStatus(): void;
 declare function pushStatus(): void;
 declare function pushStatus(): void;
+declare function pushStatus(): void;
 declare let sd: {};
 declare let rf: boolean;
 declare function refreshStatus(): void;

components/wifi-manager/webapp/webapp.cmake

@@ -1,5 +1,5 @@
 target_add_binary_data( __idf_wifi-manager webapp/dist/css/index.4bbe29a78a667faa2b6f.css.gz BINARY)
 target_add_binary_data( __idf_wifi-manager webapp/dist/favicon-32x32.png BINARY)
 target_add_binary_data( __idf_wifi-manager webapp/dist/index.html.gz BINARY)
-target_add_binary_data( __idf_wifi-manager webapp/dist/js/index.5fd84f.bundle.js.gz BINARY)
-target_add_binary_data( __idf_wifi-manager webapp/dist/js/node_vendors.5fd84f.bundle.js.gz BINARY)
+target_add_binary_data( __idf_wifi-manager webapp/dist/js/index.0ba488.bundle.js.gz BINARY)
+target_add_binary_data( __idf_wifi-manager webapp/dist/js/node_vendors.0ba488.bundle.js.gz BINARY)

components/wifi-manager/webapp/webpack.c

@@ -6,29 +6,29 @@ extern const uint8_t _favicon_32x32_png_start[] asm("_binary_favicon_32x32_png_s
 extern const uint8_t _favicon_32x32_png_end[] asm("_binary_favicon_32x32_png_end");
 extern const uint8_t _index_html_gz_start[] asm("_binary_index_html_gz_start");
 extern const uint8_t _index_html_gz_end[] asm("_binary_index_html_gz_end");
-extern const uint8_t _index_5fd84f_bundle_js_gz_start[] asm("_binary_index_5fd84f_bundle_js_gz_start");
-extern const uint8_t _index_5fd84f_bundle_js_gz_end[] asm("_binary_index_5fd84f_bundle_js_gz_end");
-extern const uint8_t _node_vendors_5fd84f_bundle_js_gz_start[] asm("_binary_node_vendors_5fd84f_bundle_js_gz_start");
-extern const uint8_t _node_vendors_5fd84f_bundle_js_gz_end[] asm("_binary_node_vendors_5fd84f_bundle_js_gz_end");
+extern const uint8_t _index_0ba488_bundle_js_gz_start[] asm("_binary_index_0ba488_bundle_js_gz_start");
+extern const uint8_t _index_0ba488_bundle_js_gz_end[] asm("_binary_index_0ba488_bundle_js_gz_end");
+extern const uint8_t _node_vendors_0ba488_bundle_js_gz_start[] asm("_binary_node_vendors_0ba488_bundle_js_gz_start");
+extern const uint8_t _node_vendors_0ba488_bundle_js_gz_end[] asm("_binary_node_vendors_0ba488_bundle_js_gz_end");
 const char * resource_lookups[] = {
 	"/css/index.4bbe29a78a667faa2b6f.css.gz",
 	"/favicon-32x32.png",
 	"/index.html.gz",
-	"/js/index.5fd84f.bundle.js.gz",
-	"/js/node_vendors.5fd84f.bundle.js.gz",
+	"/js/index.0ba488.bundle.js.gz",
+	"/js/node_vendors.0ba488.bundle.js.gz",
 ""
 };
 const uint8_t * resource_map_start[] = {
 	_index_4bbe29a78a667faa2b6f_css_gz_start,
 	_favicon_32x32_png_start,
 	_index_html_gz_start,
-	_index_5fd84f_bundle_js_gz_start,
-	_node_vendors_5fd84f_bundle_js_gz_start
+	_index_0ba488_bundle_js_gz_start,
+	_node_vendors_0ba488_bundle_js_gz_start
 };
 const uint8_t * resource_map_end[] = {
 	_index_4bbe29a78a667faa2b6f_css_gz_end,
 	_favicon_32x32_png_end,
 	_index_html_gz_end,
-	_index_5fd84f_bundle_js_gz_end,
-	_node_vendors_5fd84f_bundle_js_gz_end
+	_index_0ba488_bundle_js_gz_end,
+	_node_vendors_0ba488_bundle_js_gz_end
 };

components/wifi-manager/webapp/webpack.h

@@ -1,6 +1,6 @@
 /***********************************
 webpack_headers
-dist/css/index.4bbe29a78a667faa2b6f.css.gz,dist/favicon-32x32.png,dist/index.html.gz,dist/js/index.5fd84f.bundle.js.gz,dist/js/node_vendors.5fd84f.bundle.js.gz
+dist/css/index.4bbe29a78a667faa2b6f.css.gz,dist/favicon-32x32.png,dist/index.html.gz,dist/js/index.0ba488.bundle.js.gz,dist/js/node_vendors.0ba488.bundle.js.gz
 ***********************************/
 #pragma once
 #include <inttypes.h>