fix offline again-release

add shaffenmeisters PR and add web config

.github/workflows/Platform_build.yml

@@ -1,5 +1,8 @@
-name: Manually executable test for ESP-IDF v4.3.1
+name: Platform Build
 on: 
+  push:
+    branches: 
+      - '**4.3'
   workflow_dispatch:
     inputs:
       ui_build:
@@ -10,9 +13,6 @@ on:
         description: 'Force a Release build. When not forced, the system will check for release word in the last commit message to trigger a release'
         required: true
         type: boolean
-  # push:
-  #   branches: 
-  #     - '**4.3'
 
 jobs:
   bootstrap:

Dockerfile

@@ -15,7 +15,7 @@ ENV GCC_TOOLS_BASE=/opt/esp/tools/xtensa-esp32-elf/esp-2021r2-8.4.0/xtensa-esp32
 # To run the image interactive (windows): 
 # docker run --rm -v %cd%:/project -w /project -it sle118/squeezelite-esp32-idfv43
 # To run the image interactive (linux):
-# docker run --rm -v `pwd`:/project -w /project -it sle118/squeezelite-esp32-idfv4-master
+# docker run --rm -v `pwd`:/project -w /project -it sle118/squeezelite-esp32-idfv43
 # to build the web app inside of the interactive session
 # pushd components/wifi-manager/webapp/ && npm install && npm run-script build && popd
 #
@@ -90,7 +90,7 @@ RUN : \
   && pip show pygit2 \ 
   && python --version \  
   && pip --version \
-  && pip3 install protobuf grpcio-tools \
+  && pip install protobuf  grpcio-tools \
   && rm -rf $IDF_TOOLS_PATH/dist \
   && :
 

README.md

@@ -188,13 +188,14 @@ Ground -------------------------- coax signal ground
 The NVS parameter "display_config" sets the parameters for an optional display. Syntax is
 ```
 I2C,width=<pixels>,height=<pixels>[address=<i2c_address>][,reset=<gpio>][,HFlip][,VFlip][driver=SSD1306|SSD1326[:1|4]|SSD1327|SH1106]
-SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789|ILI9341[:16|18][,rotate]]
+SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789|ILI9341[:16|18][,rotate]][,mode=<mode>]
 ```
 - back: a LED backlight used by some older devices (ST7735). It is PWM controlled for brightness
 - reset: some display have a reset pin that is should normally be pulled up if unused
 - VFlip and HFlip are optional can be used to change display orientation
 - rotate: for non-square *drivers*, move to portrait mode. Note that *width* and *height* must be inverted then
 - Default speed is 8000000 (8MHz) but SPI can work up to 26MHz or even 40MHz
+- mode:  Default mode = 0.  Some display modules use different transaction line timings.  Check the module documentation if a non-standard mode is required.
 - SH1106 is 128x64 monochrome I2C/SPI [here]((https://www.waveshare.com/wiki/1.3inch_OLED_HAT))
 - SSD1306 is 128x32 monochrome I2C/SPI [here](https://www.buydisplay.com/i2c-blue-0-91-inch-oled-display-module-128x32-arduino-raspberry-pi)
 - SSD1322 is 256x64 grayscale 16-levels SPI in multiple sizes [here](https://www.buydisplay.com/oled-display/oled-display-module?resolution=159) - it is very nice

build-scripts/SqueezeAmp-sdkconfig.defaults

@@ -259,7 +259,7 @@ CONFIG_CSPOT_SINK=y
 # Various I/O
 #
 CONFIG_I2C_CONFIG=""
-CONFIG_SET_GPIO=""
+CONFIG_SET_GPIO="0=ir"
 CONFIG_ROTARY_ENCODER=""
 # end of Various I/O
 

components/display/core/gds_default_if.h

@@ -11,7 +11,7 @@ bool GDS_I2CInit( int PortNumber, int SDA, int SCL, int speed );
 bool GDS_I2CAttachDevice( struct GDS_Device* Device, int Width, int Height, int I2CAddress, int RSTPin, int BacklightPin );
 
 bool GDS_SPIInit( int SPI, int DC );
-bool GDS_SPIAttachDevice( struct GDS_Device* Device, int Width, int Height, int CSPin, int RSTPin, int Speed, int BacklightPin );
+bool GDS_SPIAttachDevice( struct GDS_Device* Device, int Width, int Height, int CSPin, int RSTPin, int Speed, int BacklightPin, int Mode );
 
 #ifdef __cplusplus
 }

components/display/core/ifaces/default_if_spi.c

@@ -34,7 +34,7 @@ bool GDS_SPIInit( int SPI, int DC ) {
     return true;
 }
 
-bool GDS_SPIAttachDevice( struct GDS_Device* Device, int Width, int Height, int CSPin, int RSTPin, int BackLightPin, int Speed ) {
+bool GDS_SPIAttachDevice( struct GDS_Device* Device, int Width, int Height, int CSPin, int RSTPin, int BackLightPin, int Speed, int Mode ) {
     spi_device_interface_config_t SPIDeviceConfig = { };
     spi_device_handle_t SPIDevice;
 
@@ -48,6 +48,7 @@ bool GDS_SPIAttachDevice( struct GDS_Device* Device, int Width, int Height, int
     SPIDeviceConfig.clock_speed_hz = Speed > 0 ? Speed : SPI_MASTER_FREQ_8M;
     SPIDeviceConfig.spics_io_num = CSPin;
     SPIDeviceConfig.queue_size = 1;
+    SPIDeviceConfig.mode = Mode;
 	SPIDeviceConfig.flags = SPI_DEVICE_NO_DUMMY;
 	if (Device->SPIParams) Device->SPIParams(SPIDeviceConfig.clock_speed_hz, &SPIDeviceConfig.mode, 
 											 &SPIDeviceConfig.cs_ena_pretrans, &SPIDeviceConfig.cs_ena_posttrans);

components/display/display.c

@@ -119,14 +119,15 @@ void display_init(char *welcome) {
 		
 			ESP_LOGI(TAG, "Display is I2C on port %u", address);
 		} else if (strcasestr(config, "SPI") && spi_system_host != -1) {
-			int CS_pin = -1, speed = 0;
+			int CS_pin = -1, speed = 0, mode = 0;
 		
 			PARSE_PARAM(config, "cs", '=', CS_pin);
 			PARSE_PARAM(config, "speed", '=', speed);
+			PARSE_PARAM(config, "mode", '=', mode);
 		
 			init = true;
 			GDS_SPIInit( spi_system_host, spi_system_dc_gpio );
-			GDS_SPIAttachDevice( display, width, height, CS_pin, RST_pin, backlight_pin, speed );
+			GDS_SPIAttachDevice( display, width, height, CS_pin, RST_pin, backlight_pin, speed, mode );
 				
 			ESP_LOGI(TAG, "Display is SPI host %u with cs:%d", spi_system_host, CS_pin);
 		} else {

components/driver_bt/bt_app_core.c

@@ -83,15 +83,13 @@ static void bt_app_task_handler(void *arg)
 	
 	esp_bt_controller_mem_release(ESP_BT_MODE_BLE);
     esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
-	if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE ){
-            
-        
+	if (esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE ) {
         if ((err = esp_bt_controller_init(&bt_cfg)) != ESP_OK) {
             ESP_LOGE(TAG, "%s initialize controller failed: %s\n", __func__, esp_err_to_name(err));
             goto exit;
         }
 
-        if ((err = esp_bt_controller_enable(ESP_BT_MODE_BTDM)) != ESP_OK) {
+        if ((err = esp_bt_controller_enable(ESP_BT_MODE_CLASSIC_BT)) != ESP_OK) {
             ESP_LOGE(TAG, "%s enable controller failed: %s\n", __func__, esp_err_to_name(err));
             goto exit;
         }

components/platform_console/cmd_config.c

@@ -592,6 +592,8 @@ static int is_valid_gpio_number(int gpio, const char * name, FILE *f, bool manda
 	}
 	return 0;
 }
+
+#ifdef CONFIG_CSPOT_SINK
 static int do_cspot_config(int argc, char **argv){
     int nerrors = arg_parse_msg(argc, argv,(struct arg_hdr **)&cspot_args);
     if (nerrors != 0) {
@@ -639,6 +641,7 @@ static int do_cspot_config(int argc, char **argv){
 	FREE_AND_NULL(buf);
 	return nerrors;
 }
+#endif
 static int do_i2s_cmd(int argc, char **argv)
 {
 	i2s_platform_config_t i2s_dac_pin = {
@@ -746,6 +749,7 @@ cJSON * known_model_cb(){
 	}
 	return values;
 }
+#ifdef CONFIG_CSPOT_SINK
 cJSON * cspot_cb(){
 	cJSON * values = cJSON_CreateObject();
 	if(!values){
@@ -769,6 +773,7 @@ cJSON * cspot_cb(){
 	cJSON_Delete(cspot_config);
 	return values;
 }
+#endif
 cJSON * i2s_cb(){
 	cJSON * values = cJSON_CreateObject();
 
@@ -1172,7 +1177,7 @@ static void register_known_templates_config(){
     cmd_to_json_with_cb(&cmd,&known_model_cb);
     ESP_ERROR_CHECK(esp_console_cmd_register(&cmd));
 }
-
+#ifdef CONFIG_CSPOT_SINK
 static void register_cspot_config(){
 	cspot_args.deviceName = arg_str1(NULL,"deviceName","","Device Name");
 	cspot_args.bitrate = arg_int1(NULL,"bitrate","96|160|320","Streaming Bitrate (kbps)");
@@ -1188,6 +1193,7 @@ static void register_cspot_config(){
 	cmd_to_json_with_cb(&cmd,&cspot_cb);
 	ESP_ERROR_CHECK(esp_console_cmd_register(&cmd));
 }
+#endif
 static void register_i2s_config(void){
 	i2s_args.model_name = arg_str1(NULL,"model_name",STR_OR_BLANK(get_dac_list()),"DAC Model Name");
 	i2s_args.clear = arg_lit0(NULL, "clear", "Clear configuration");
@@ -1329,8 +1335,11 @@ static void register_squeezelite_config(void){
 void register_config_cmd(void){
 	if(!is_dac_config_locked()){
 	 	 register_known_templates_config();
+	
 	}
+#ifdef CONFIG_CSPOT_SINK	
 	register_cspot_config();
+#endif	
 	register_audio_config();
 //	register_squeezelite_config();
 	register_bt_source_config();

components/platform_console/cmd_i2ctools.c

@@ -101,6 +101,7 @@ static struct {
 	struct arg_int *reset;
 	struct arg_lit *clear;
 	struct arg_lit *invert;
+	struct arg_int *mode;
 	struct arg_end *end;
 } i2cdisp_args;
 
@@ -377,6 +378,13 @@ static int do_i2c_set_display(int argc, char **argv)
 		}
 		/* Check "--cs" option */
 		nerrors +=is_output_gpio(i2cdisp_args.cs,f,&config.CS_pin, false);
+	    /* Check "--mode" option */
+		if (i2cdisp_args.mode->count) {
+			config.mode=i2cdisp_args.mode->ival[0];
+		}
+		else {
+			config.mode = 0;
+		}
 	}
 
 	nerrors +=is_output_gpio(i2cdisp_args.reset,f,&config.RST_pin, false);
@@ -964,6 +972,9 @@ cJSON * i2c_set_display_cb(){
 		cJSON_AddBoolToObject(values,"hf",conf->hflip);
 		cJSON_AddBoolToObject(values,"vf",conf->vflip);
 		cJSON_AddBoolToObject(values,"invert",conf->invert);
+		if(conf->mode>=0){
+			cJSON_AddNumberToObject(values,"mode",conf->mode);
+		}	
 	}
 	return values;
 }
@@ -986,6 +997,7 @@ static void register_i2c_set_display(){
 	i2cdisp_args.rotate = 	arg_lit0("r", "rotate", "Rotate 180 degrees");
 	i2cdisp_args.invert = 	arg_lit0("i", "invert", "Invert colors");
 	i2cdisp_args.clear = 	arg_lit0(NULL, "clear", "clear configuration and return");
+	i2cdisp_args.mode = 	arg_int0("m", "mode", "<n>","SPI Only. Transaction Line Mode (Default 0)");
 	i2cdisp_args.end = 		arg_end(8);
 	const esp_console_cmd_t i2c_set_display= {
 		.command = CFG_TYPE_HW("display"),

components/services/accessors.c

@@ -352,6 +352,10 @@ esp_err_t config_display_set(const display_config_t * config){
 			snprintf(config_buffer2,buffer_size,"%s,speed=%i",config_buffer,config->speed);
 			strcpy(config_buffer,config_buffer2);
 		}
+		if(config->mode >=0 && strcasecmp("SPI",config->type)==0){
+			snprintf(config_buffer2,buffer_size,"%s,mode=%i",config_buffer,config->mode);
+			strcpy(config_buffer,config_buffer2);
+		}
 		snprintf(config_buffer2,buffer_size,"%s,driver=%s%s%s%s",config_buffer,config->drivername,config->hflip?",HFlip":"",config->vflip?",VFlip":"",config->rotate?",rotate":"");
 		strcpy(config_buffer,config_buffer2);
 		log_send_messaging(MESSAGING_INFO,"Updating display configuration to %s",config_buffer);
@@ -465,6 +469,7 @@ const display_config_t * config_display_get(){
 		.rotate = false,
 		.invert = false,
 		.colorswap = 0,
+		.mode = 0,
 	};
 	char *config = config_alloc_get(NVS_TYPE_STR, "display_config");
 	if (!config) {
@@ -484,6 +489,8 @@ const display_config_t * config_display_get(){
 	PARSE_PARAM(config, "address", '=', dstruct.address);
 	PARSE_PARAM(config, "cs", '=', dstruct.CS_pin);
 	PARSE_PARAM(config, "speed", '=', dstruct.speed);
+	PARSE_PARAM(config, "back", '=', dstruct.back);
+	PARSE_PARAM(config, "mode", '=', dstruct.mode);
 
 	if (strstr(config, "I2C") ) dstruct.type=i2c_name_type;
 	if (strstr(config, "SPI") ) dstruct.type=spi_name_type;

components/services/accessors.h

@@ -33,6 +33,7 @@ typedef struct {
 	bool rotate;
 	bool invert;
 	int colorswap;
+	int mode;
 } display_config_t;
 
 typedef struct eth_config_struct {

components/services/buttons.c

@@ -415,7 +415,7 @@ bool create_rotary(void *id, int A, int B, int SW, int long_press, rotary_handle
 	// create companion button if rotary has a switch
 	if (SW != -1) button_create(id, SW, BUTTON_LOW, true, 0, rotary_button_handler, long_press, -1);
 	
-	ESP_LOGI(TAG, "Creating rotary encoder A:%d B:%d, SW:%d", A, B, SW);
+	ESP_LOGI(TAG, "Created rotary encoder A:%d B:%d, SW:%d", A, B, SW);
 	
 	return true;
 }	
@@ -432,5 +432,7 @@ bool create_infrared(int gpio, infrared_handler handler) {
 	common_task_init();
 	xRingbufferAddToQueueSetRead(infrared.rb, common_queue_set);
 	
+	ESP_LOGI(TAG, "Created infrared receiver using GPIO %u", gpio);	
+	
 	return (infrared.rb != NULL);
 }	

components/spotify/Shim.cpp

@@ -162,6 +162,8 @@ ESP_LOGI(TAG, "Getting Spotify event %d ", (int) event.eventType);
             }
 			});
 
+			// need to make sure mercuryManager is running otherwise we'll loop and destroy instances
+			while (!mercuryManager->isRunning) vTaskDelay(pdMS_TO_TICKS(25));
             mercuryManager->reconnectedCallback = []() {
                 return spircController->subscribe();
             };

components/spotify/cspot/CMakeLists.txt

@@ -36,7 +36,7 @@ if(UNIX AND NOT APPLE)
 endif()
 
 # Build protobuf code
-if(0)
+if(1)
 set(NANOPB_OPTIONS "-I${CMAKE_CURRENT_SOURCE_DIR}")
 file(GLOB PROTOS protobuf/*.proto)
 nanopb_generate_cpp(PROTO_SRCS PROTO_HDRS RELPATH ${CMAKE_CURRENT_SOURCE_DIR} ${PROTOS})

components/spotify/cspot/bell/nanopb/generator/protoc-gen-nanopb

@@ -10,5 +10,4 @@
 # --plugin= on the command line.
 
 MYPATH=$(dirname "$0")
-echo "Executing $MYPATH/nanopb_generator.py "
 exec "$MYPATH/nanopb_generator.py" --protoc-plugin

components/spotify/cspot/src/PlainConnection.cpp

@@ -179,6 +179,7 @@ size_t PlainConnection::writeBlock(const std::vector<uint8_t> &data)
                 break;
             default:
                 if (retries++ > 4) throw std::runtime_error("Error in write");
+				goto WRITE;
             }
         }
         idx += n;

components/wifi-manager/webapp/dist/src/js/test.d.ts

@@ -17,6 +17,12 @@ declare function getStatus(): {};
 declare function getStatus(): {};
 declare function getStatus(): {};
 declare function getStatus(): {};
+declare function getStatus(): {};
+declare function getStatus(): {};
+declare function getStatus(): {};
+declare function getStatus(): {};
+declare function getStatus(): {};
+declare function getStatus(): {};
 declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
@@ -36,6 +42,18 @@ declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
 declare function getRadioButton(entry: any): string;
+declare function getRadioButton(entry: any): string;
+declare function getRadioButton(entry: any): string;
+declare function getRadioButton(entry: any): string;
+declare function getRadioButton(entry: any): string;
+declare function getRadioButton(entry: any): string;
+declare function getRadioButton(entry: any): string;
+declare function pushStatus(): void;
+declare function pushStatus(): void;
+declare function pushStatus(): void;
+declare function pushStatus(): void;
+declare function pushStatus(): void;
+declare function pushStatus(): void;
 declare function pushStatus(): void;
 declare function pushStatus(): void;
 declare function pushStatus(): void;

components/wifi-manager/webapp/src/index.ejs

@@ -44,19 +44,19 @@
 
 		</div>
 		<div class="info navbar-right" style="display: inline-flex;">
-			<span class="recovery_element material-icons " style="color:orange; display: none">system_update_alt</span>
-			<span id="battery" class="material-icons" style="fill:white; display: none">battery_full</span>
-			<span id="o_jack" class="material-icons" style="fill:white; display: none">headphones</span>
-			<span id="s_airplay" class="material-icons" style="fill:white; display: none">airplay</span>
+			<span class="recovery_element material-icons " style="color:orange; display: none" aria-label="🛑" >system_update_alt</span>
+			<span id="battery" class="material-icons" style="fill:white; display: none" aria-label="🔋" >battery_full</span>
+			<span id="o_jack" class="material-icons" style="fill:white; display: none" aria-label="🎧">headphones</span>
+			<span id="s_airplay" class="material-icons" style="fill:white; display: none" aria-label="🍎">airplay</span>
 			<em id="s_cspot" class="fab fa-spotify" style="fill:white; display: inline"></em>
 			<span data-bs-toggle="tooltip" id="o_type" data-bs-placement="top" title="">
-				<span id="o_bt" class="material-icons" style="fill:white; display: none">bluetooth</span>
-				<span id="o_spdif" class="material-icons" style="fill:white; display: none">graphic_eq</span>
-				<span id="o_i2s" class="material-icons" style="fill:white; display: none">speaker</span>
+				<span id="o_bt" class="material-icons" style="fill:white; display: none" aria-label="">bluetooth</span>
+				<span id="o_spdif" class="material-icons" style="fill:white; display: none" aria-label="">graphic_eq</span>
+				<span id="o_i2s" class="material-icons" style="fill:white; display: none" aria-label="🔈">speaker</span>
 			</span>
-			<span id="ethernet" class="material-icons if_eth" style="fill:white; display: none">cable</span>
+			<span id="ethernet" class="material-icons if_eth" style="fill:white; display: none" aria-label="ETH">cable</span>
 			<span id="wifiStsIcon" class="material-icons if_wifi"
-				style="fill:white; display: none">signal_wifi_statusbar_4_bar</span>
+				style="fill:white; display: none" aria-label=""></span>
 
 		</div>
 	</header>
@@ -374,22 +374,6 @@
 							</div>
 						</div>
 					</div>
-					<div class="card-body if_wifi" style="display: none">
-						<table class="table table-hover">
-							<thead>
-								<tr>
-									<th scope="col">Joined</th>
-									<th scope="col">Name</th>
-									<th scope="col">Signal</th>
-									<th scope="col">Security</th>
-								</tr>
-							</thead>
-							<tbody id="wifiTable"></tbody>
-						</table>
-						<button type="button" id="updateAP" class="btn btn-info btn-sm">Scan</button>
-
-					</div>
-
 
 
 				</div>

components/wifi-manager/webapp/src/js/custom.js

@@ -77,22 +77,22 @@ const nvsTypes = {
   NVS_TYPE_ANY: 0xff /*! < Must be last */,
 };
 const btIcons = {
-  bt_playing: 'media_bluetooth_on',
-  bt_disconnected: 'media_bluetooth_off',
-  bt_neutral: 'bluetooth',
-  bt_connecting: 'bluetooth_searching',
-  bt_connected: 'bluetooth_connected',
-  bt_disabled: 'bluetooth_disabled',
-  play_arrow: 'play_circle_filled',
-  pause: 'pause_circle',
-  stop: 'stop_circle',
-  '': '',
+  bt_playing: {'label':'','icon': 'media_bluetooth_on'},
+  bt_disconnected: {'label':'','icon': 'media_bluetooth_off'},
+  bt_neutral: {'label':'','icon': 'bluetooth'},
+  bt_connecting: {'label':'','icon': 'bluetooth_searching'},
+  bt_connected: {'label':'','icon': 'bluetooth_connected'},
+  bt_disabled: {'label':'','icon': 'bluetooth_disabled'},
+  play_arrow: {'label':'','icon': 'play_circle_filled'},
+  pause: {'label':'','icon': 'pause_circle'},
+  stop: {'label':'','icon': 'stop_circle'},
+  '':  {'label':'','icon':''}
 };
 const batIcons = [
-  { icon: "battery_0_bar", ranges: [{ f: 5.8, t: 6.8 }, { f: 8.8, t: 10.2 }] },
-  { icon: "battery_2_bar", ranges: [{ f: 6.8, t: 7.4 }, { f: 10.2, t: 11.1 }] },
-  { icon: "battery_3_bar", ranges: [{ f: 7.4, t: 7.5 }, { f: 11.1, t: 11.25 }] },
-  { icon: "battery_4_bar", ranges: [{ f: 7.5, t: 7.8 }, { f: 11.25, t: 11.7 }] }
+  { icon: "battery_0_bar", label:'▪', ranges: [{ f: 5.8, t: 6.8 }, { f: 8.8, t: 10.2 }] },
+  { icon: "battery_2_bar", label:'▪▪', ranges: [{ f: 6.8, t: 7.4 }, { f: 10.2, t: 11.1 }] },
+  { icon: "battery_3_bar", label:'▪▪▪', ranges: [{ f: 7.4, t: 7.5 }, { f: 11.1, t: 11.25 }] },
+  { icon: "battery_4_bar", label:'▪▪▪▪', ranges: [{ f: 7.5, t: 7.8 }, { f: 11.25, t: 11.7 }] }
 ];
 const btStateIcons = [
   { desc: 'Idle', sub: ['bt_neutral'] },
@@ -464,13 +464,19 @@ window.handleReboot = function (link) {
     $('#reboot_nav').removeClass('active'); delayReboot(500, '', link);
   }
 }
+function isConnected(){
+  return ConnectedTo.hasOwnProperty('ip') && ConnectedTo.ip!='0.0.0.0'&& ConnectedTo.ip!='';
+}
+function getIcon(icons){
+  return isConnected()?icons.icon:icons.label;
+}
 function handlebtstate(data) {
   let icon = '';
   let tt = '';
   if (data.bt_status !== undefined && data.bt_sub_status !== undefined) {
     const iconindex = btStateIcons[data.bt_status].sub[data.bt_sub_status];
     if (iconindex) {
-      icon = btIcons[iconindex];
+      icon =  btIcons[iconindex];
       tt = btStateIcons[data.bt_status].desc;
     } else {
       icon = btIcons.bt_connected;
@@ -479,7 +485,7 @@ function handlebtstate(data) {
   }
 
   $('#o_type').attr('title', tt);
-  $('#o_bt').html(icon);
+  $('#o_bt').html(isConnected()?icon.label:icon.text);
 }
 function handleTemplateTypeRadio(outtype) {
   $('#o_type').children('span').css({ display: 'none' });
@@ -857,7 +863,6 @@ window.handleConnect = function () {
   $("*[class*='connecting']").hide();
   $('#ssid-wait').text(ConnectingToSSID.ssid);
   $('.connecting').show();
-
   $.ajax({
     url: '/connect.json',
     dataType: 'text',
@@ -876,6 +881,10 @@ window.handleConnect = function () {
 
 }
 $(document).ready(function () {
+  $('.material-icons').each(function (_index, entry) {
+    entry.attributes['icon']=entry.textContent;
+  });
+  setIcons(true);
   handleNVSVisible();
   flashState.init();
   $('#fw-url-input').on('input', function () {
@@ -1294,20 +1303,23 @@ window.setURL = function (button) {
 
 function rssiToIcon(rssi) {
   if (rssi >= -55) {
-    return `signal_wifi_statusbar_4_bar`;
+    return {'label':'****','icon':`signal_wifi_statusbar_4_bar`};
   } else if (rssi >= -60) {
-    return `network_wifi_3_bar`;
+    return {'label':'***','icon':`network_wifi_3_bar`};
   } else if (rssi >= -65) {
-    return `network_wifi_2_bar`;
+    return {'label':'**','icon':`network_wifi_2_bar`};
   } else if (rssi >= -70) {
-    return `network_wifi_1_bar`;
+    return {'label':'*','icon':`network_wifi_1_bar`};
   } else {
-    return `signal_wifi_statusbar_null`;
+    return {'label':'.','icon':`signal_wifi_statusbar_null`};
   }
 }
 
 function refreshAP() {
   if (ConnectedTo?.urc === connectReturnCode.ETH) return;
+  $.ajaxSetup({
+    timeout: 3000 //Time in milliseconds
+  });
   $.getJSON('/scan.json', async function () {
     await sleep(2000);
     $.getJSON('/ap.json', function (data) {
@@ -1327,10 +1339,13 @@ function refreshAP() {
   });
 }
 function formatAP(ssid, rssi, auth) {
+  const rssi_icon=rssiToIcon(rssi);
+  const auth_icon={label:auth == 0 ? '🔓' : '🔒',icon:auth == 0 ? 'no_encryption' : 'lock'};
+  
   return `<tr data-bs-toggle="modal" data-bs-target="#WifiConnectDialog"><td></td><td>${ssid}</td><td>
-  <span class="material-icons" style="fill:white; display: inline" >${rssiToIcon(rssi)}</span>
+  <span class="material-icons" style="fill:white; display: inline" aria-label="${rssi_icon.label}" icon="${rssi_icon.icon}" >${getIcon(rssi_icon)}</span>
   	</td><td>
-    <span class="material-icons">${(auth == 0 ? 'no_encryption' : 'lock')}</span>
+    <span class="material-icons" aria-label="${auth_icon.label}" icon="${auth_icon.icon}">${getIcon(auth_icon)}</span>
   </td></tr>`;
 }
 function refreshAPHTML2(data) {
@@ -1411,6 +1426,9 @@ function getBTSinkOpt(name) {
   return $(`${btSinkNamesOptSel} option:contains('${name}')`);
 }
 function getMessages() {
+  $.ajaxSetup({
+    timeout: messageInterval //Time in milliseconds
+  });
   $.getJSON('/messages.json', async function (data) {
     for (const msg of data) {
       const msgAge = msg.current_time - msg.sent_time;
@@ -1627,7 +1645,13 @@ function handleWifiDialog(data) {
 
   }
 }
+function setIcons(offline){
+  $('.material-icons').each(function (_index, entry) {
+    entry.textContent = entry.attributes[offline?'aria-label':'icon'].value;
+  });
+}
 function handleNetworkStatus(data) {
+  setIcons(!isConnected());
   if (hasConnectionChanged(data) || !data.urc) {
     ConnectedTo = data;
     $(".if_eth").hide();
@@ -1658,16 +1682,18 @@ function batteryToIcon(voltage) {
   for (const iconEntry of batIcons) {
     for (const entryRanges of iconEntry.ranges) {
       if (inRange(voltage, entryRanges.f, entryRanges.t)) {
-        return iconEntry.icon;
+        return { label: iconEntry.label, icon:iconEntry.icon};
       }
     }
   }
 
 
-  return "battery_full";
+  return {label:'▪▪▪▪',icon:"battery_full"};
 }
 function checkStatus() {
-
+  $.ajaxSetup({
+    timeout: statusInterval //Time in milliseconds
+  });
   $.getJSON('/status.json', function (data) {
     handleRecoveryMode(data);
     handleNVSVisible();
@@ -1691,7 +1717,10 @@ function checkStatus() {
       $('span#flash-status').html('');
     }
     if (data.Voltage) {
-      $('#battery').html(`${batteryToIcon(data.Voltage)}`);
+      const bat_icon=batteryToIcon(data.Voltage);
+      $('#battery').html(`${getIcon(bat_icon)}`);
+      $('#battery').attr("aria-label",bat_icon.label);
+      $('#battery').attr("icon",bat_icon.icon);
       $('#battery').show();
     } else {
       $('#battery').hide();
@@ -1835,6 +1864,9 @@ function getLongOps(data, name, longopts) {
   return data.values[name] !== undefined ? data.values[name][longopts] : "";
 }
 function getCommands() {
+  $.ajaxSetup({
+    timeout: 7000 //Time in milliseconds
+  });
   $.getJSON('/commands.json', function (data) {
     console.log(data);
     $('.orec').show();
@@ -1956,6 +1988,9 @@ function getCommands() {
 }
 
 function getConfig() {
+  $.ajaxSetup({
+    timeout: 7000 //Time in milliseconds
+  });
   $.getJSON('/config.json', function (entries) {
     $('#nvsTable tr').remove();
     const data = (entries.config ? entries.config : entries);
@@ -2102,4 +2137,3 @@ function inRange(x, min, max) {
 function sleep(ms) {
   return new Promise(resolve => setTimeout(resolve, ms));
 }
-

components/wifi-manager/webapp/webapp.cmake

@@ -1,5 +1,5 @@
 target_add_binary_data( __idf_wifi-manager webapp/dist/css/index.7964a13ec910c36040b8.css.gz BINARY)
 target_add_binary_data( __idf_wifi-manager webapp/dist/favicon-32x32.png BINARY)
 target_add_binary_data( __idf_wifi-manager webapp/dist/index.html.gz BINARY)
-target_add_binary_data( __idf_wifi-manager webapp/dist/js/index.fff661.bundle.js.gz BINARY)
-target_add_binary_data( __idf_wifi-manager webapp/dist/js/node_vendors.fff661.bundle.js.gz BINARY)
+target_add_binary_data( __idf_wifi-manager webapp/dist/js/index.9af6cc.bundle.js.gz BINARY)
+target_add_binary_data( __idf_wifi-manager webapp/dist/js/node_vendors.9af6cc.bundle.js.gz BINARY)

components/wifi-manager/webapp/webpack.c

@@ -6,29 +6,29 @@ extern const uint8_t _favicon_32x32_png_start[] asm("_binary_favicon_32x32_png_s
 extern const uint8_t _favicon_32x32_png_end[] asm("_binary_favicon_32x32_png_end");
 extern const uint8_t _index_html_gz_start[] asm("_binary_index_html_gz_start");
 extern const uint8_t _index_html_gz_end[] asm("_binary_index_html_gz_end");
-extern const uint8_t _index_fff661_bundle_js_gz_start[] asm("_binary_index_fff661_bundle_js_gz_start");
-extern const uint8_t _index_fff661_bundle_js_gz_end[] asm("_binary_index_fff661_bundle_js_gz_end");
-extern const uint8_t _node_vendors_fff661_bundle_js_gz_start[] asm("_binary_node_vendors_fff661_bundle_js_gz_start");
-extern const uint8_t _node_vendors_fff661_bundle_js_gz_end[] asm("_binary_node_vendors_fff661_bundle_js_gz_end");
+extern const uint8_t _index_9af6cc_bundle_js_gz_start[] asm("_binary_index_9af6cc_bundle_js_gz_start");
+extern const uint8_t _index_9af6cc_bundle_js_gz_end[] asm("_binary_index_9af6cc_bundle_js_gz_end");
+extern const uint8_t _node_vendors_9af6cc_bundle_js_gz_start[] asm("_binary_node_vendors_9af6cc_bundle_js_gz_start");
+extern const uint8_t _node_vendors_9af6cc_bundle_js_gz_end[] asm("_binary_node_vendors_9af6cc_bundle_js_gz_end");
 const char * resource_lookups[] = {
 	"/css/index.7964a13ec910c36040b8.css.gz",
 	"/favicon-32x32.png",
 	"/index.html.gz",
-	"/js/index.fff661.bundle.js.gz",
-	"/js/node_vendors.fff661.bundle.js.gz",
+	"/js/index.9af6cc.bundle.js.gz",
+	"/js/node_vendors.9af6cc.bundle.js.gz",
 ""
 };
 const uint8_t * resource_map_start[] = {
 	_index_7964a13ec910c36040b8_css_gz_start,
 	_favicon_32x32_png_start,
 	_index_html_gz_start,
-	_index_fff661_bundle_js_gz_start,
-	_node_vendors_fff661_bundle_js_gz_start
+	_index_9af6cc_bundle_js_gz_start,
+	_node_vendors_9af6cc_bundle_js_gz_start
 };
 const uint8_t * resource_map_end[] = {
 	_index_7964a13ec910c36040b8_css_gz_end,
 	_favicon_32x32_png_end,
 	_index_html_gz_end,
-	_index_fff661_bundle_js_gz_end,
-	_node_vendors_fff661_bundle_js_gz_end
+	_index_9af6cc_bundle_js_gz_end,
+	_node_vendors_9af6cc_bundle_js_gz_end
 };

components/wifi-manager/webapp/webpack.h

@@ -1,6 +1,6 @@
 /***********************************
 webpack_headers
-dist/css/index.7964a13ec910c36040b8.css.gz,dist/favicon-32x32.png,dist/index.html.gz,dist/js/index.fff661.bundle.js.gz,dist/js/node_vendors.fff661.bundle.js.gz
+dist/css/index.7964a13ec910c36040b8.css.gz,dist/favicon-32x32.png,dist/index.html.gz,dist/js/index.9af6cc.bundle.js.gz,dist/js/node_vendors.9af6cc.bundle.js.gz
 ***********************************/
 #pragma once
 #include <inttypes.h>

docker/build_tools.py

@@ -12,18 +12,29 @@ import io
 from os import walk
 
 from requests import Response
-NEWLINE_CHAR = '\n'
-def print_message(message,prefix=''):
-    trimmed=re.sub(r'\n', r'%0A', message,flags=re.MULTILINE)
-    print(f'{prefix}{trimmed}')
-
-def print_debug(message):
-    print_message(message,'::debug::')
+ 
+class Logger:
+    NEWLINE_CHAR = '\n'
+    with_crlf = False
+    @classmethod
+    def print_message(cls,message,prefix=''):
+        if not Logger.with_crlf:
+            trimmed=re.sub(r'\n', r'%0A', message,flags=re.MULTILINE)
+        print(f'{prefix}{trimmed}')
+    @classmethod
+    def debug(cls,message):
+        cls.print_message(message,'::debug::')
 
 
-def print_error(message):
-    print_message(message,'::error::')
-
+    @classmethod
+    def error(cls,message):
+        cls.print_message(message,'::error::')
+    @classmethod
+    def notice(cls,message):
+        cls.print_message(message,'::notice::')    
+    @classmethod
+    def warning(cls,message):
+        cls.print_message(message,'::notice::')   
 
 try:
 
@@ -34,7 +45,6 @@ try:
     import glob
 
     import json
-    import logging
     import re
     import shutil
     import stat
@@ -60,12 +70,12 @@ try:
     from genericpath import isdir
 
 except ImportError as ex:
-    print_error(
-        f'Failed importing module {ex.name}, using interpreter {sys.executable}. {NEWLINE_CHAR} Installed packages:')
+    Logger.error(
+        f'Failed importing module {ex.name}, using interpreter {sys.executable}. {Logger.NEWLINE_CHAR} Installed packages:')
     installed_packages = pkg_resources.working_set
     installed_packages_list = sorted(
         ["%s==%s" % (i.key, i.version) for i in installed_packages])
-    print(NEWLINE_CHAR.join(installed_packages_list))
+    print(Logger.NEWLINE_CHAR.join(installed_packages_list))
     print(f'Environment: ')
     envlist = "\n".join([f"{k}={v}" for k, v in sorted(os.environ.items())])
     print(f'{envlist}')
@@ -74,13 +84,15 @@ except ImportError as ex:
 tool_version = "1.0.7"
 WEB_INSTALLER_DEFAULT_PATH = './web_installer/'
 FORMAT = '%(asctime)s %(message)s'
-logging.basicConfig(format=FORMAT)
+
 github_env = type('', (), {})()
 manifest = {
     "name": "",
     "version": "",
     "home_assistant_domain": "slim_player",
     "funding_url": "https://esphome.io/guides/supporters.html",
+    "new_install_prompt_erase": True,
+    "new_install_improv_wait_time" : 20,
     "builds": [
         {
             "chipFamily": "ESP32",
@@ -121,10 +133,16 @@ parser = argparse.ArgumentParser(
     description='Handles some parts of the squeezelite-esp32 build process')
 parser.add_argument('--cwd', type=str,
                     help='Working directory', default=os.getcwd())
+parser.add_argument('--with_crlf', action='store_true',help='To prevent replacing cr/lf with hex representation')
 parser.add_argument('--loglevel', type=str, choices={
                     'CRITICAL', 'ERROR', 'WARNING', 'INFO', 'DEBUG', 'NOTSET'}, help='Logging level', default='INFO')
 subparsers = parser.add_subparsers(dest='command', required=True)
 
+parser_commits = subparsers.add_parser("list_commits",add_help=False,
+                                    description="Commits list",
+                                    help="Lists the last commits"
+                                    )
+
 parser_dir = subparsers.add_parser("list_files",
                                    add_help=False,
                                    description="List Files parser",
@@ -198,13 +216,13 @@ parser_build_flags.add_argument(
 parser_build_flags.add_argument(
     '--ui_build', action='store_true', help='Include building the web UI')
 
-
 def format_commit(commit):
     # 463a9d8b7 Merge branch 'bugfix/ci_deploy_tags_v4.0' into 'release/v4.0' (2020-01-11T14:08:55+08:00)
     dt = datetime.fromtimestamp(float(commit.author.time), timezone(
         timedelta(minutes=commit.author.offset)))
-    timestr = dt.strftime('%c%z')
-    cmesg = commit.message.replace('\n', ' ')
+    #timestr = dt.strftime('%c%z')
+    timestr = dt.strftime('%F %R %Z')
+    cmesg:str = commit.message.replace('\n', ' ').replace('\r','').replace('*','-')
     return f'{commit.short_id} {cmesg} ({timestr}) <{commit.author.name}>'.replace('  ', ' ', )
 
 
@@ -277,21 +295,21 @@ class BinFile():
         self.source_full_path = os.path.join(
             source_path, file_build_path).rstrip()
         self.offset = offset
-        self.target_name = f'{release_details.format_prefix()}-{self.name}'.rstrip()
+        self.target_name = f'{release_details.format_prefix()}-{release_details.bitrate}-{self.name}'.rstrip()
 
     def get_manifest(self):
         return {"path": self.target_name, "offset": self.offset}
 
     def copy(self, target_folder) -> str:
         self.target_fullpath = os.path.join(target_folder, self.target_name)
-        print_debug(
+        Logger.debug(
             f'File {self.source_full_path} will be copied to {self.target_fullpath}')
         try:
             os.makedirs(target_folder, exist_ok=True)
             shutil.copyfile(self.source_full_path,
                             self.target_fullpath, follow_symlinks=True)
         except Exception as ex:
-            print_error(f"Error while copying {self.source_full_path} to {self.target_fullpath}{NEWLINE_CHAR}Content of {os.path.dirname(self.source_full_path.rstrip())}:{NEWLINE_CHAR}{NEWLINE_CHAR.join(get_file_list(os.path.dirname(self.source_full_path.rstrip())))}")
+            Logger.error(f"Error while copying {self.source_full_path} to {self.target_fullpath}{Logger.NEWLINE_CHAR}Content of {os.path.dirname(self.source_full_path.rstrip())}:{Logger.NEWLINE_CHAR}{Logger.NEWLINE_CHAR.join(get_file_list(os.path.dirname(self.source_full_path.rstrip())))}")
             
                 
             
@@ -323,7 +341,7 @@ class PlatformRelease():
     flash_file_path: str
 
     def get_manifest_name(self) -> str:
-        return f'{self.name_prefix}-{self.release_details.format_prefix()}.json'
+        return f'{self.name_prefix}-{self.release_details.format_prefix()}-{self.release_details.bitrate}.json'
 
     def __init__(self, flash_file_path, git_release, build_dir, branch, name_prefix) -> None:
         self.name = git_release.tag_name
@@ -389,8 +407,7 @@ class PlatformRelease():
             self.has_artifacts = False
 
     def cleanup(self):
-        print(
-            f'removing temp directory for platform release {self.name}')
+        Logger.debug(f'removing temp directory for platform release {self.name}')
         shutil.rmtree(self.tempfolder)
 
     def get_attributes(self):
@@ -438,7 +455,6 @@ class Releases():
         return result
 
     def append(self, value: PlatformRelease):
-        # optional processing here
         if self.count(value) == 0:
             self._dict[value.platform()] = []
         if self.should_add(value):
@@ -465,8 +481,7 @@ class Releases():
 
     def add_package(self, package: PlatformRelease, with_artifacts: bool = True):
         if self.branch != package.branch:
-            print(
-                f'Skipping release {package.name} from branch {package.branch}')
+            Logger.debug(f'Skipping release {package.name} from branch {package.branch}')
         elif package.has_artifacts or not with_artifacts:
             self.append(package)
 
@@ -476,7 +491,7 @@ class Releases():
         if last is None:
             return ''
         else:
-            return last.message.replace(NEWLINE_CHAR, ' ')
+            return last.message.replace(Logger.NEWLINE_CHAR, ' ')
 
     @classmethod
     def get_last_author(cls, repo_obj: Repository = None) -> Signature:
@@ -505,7 +520,7 @@ class Releases():
                 print(
                     f'Last commit for {head.shorthand} is {format_commit(cls.last_commit)}')
             except Exception as e:
-                print_error(
+                Logger.error(
                     f'Unable to retrieve last commit for {head.shorthand}/{target}: {e}')
                 cls.last_commit = None
         return cls.last_commit
@@ -517,7 +532,7 @@ class Releases():
                 print(f'Opening repository from {path}')
                 cls.repo = Repository(path=path)
             except GitError as ex:
-                print_error(f"Unable to access the repository({ex}).\nContent of {path}:\n{NEWLINE_CHAR.join(get_file_list(path, 1))}")
+                Logger.error(f"Unable to access the repository({ex}).\nContent of {path}:\n{Logger.NEWLINE_CHAR.join(get_file_list(path, 1))}")
                 raise
         return cls.repo
 
@@ -558,11 +573,11 @@ class Releases():
         packages: Releases = cls(branch=repo.head.shorthand, maxcount=maxcount)
         build_dir = os.path.dirname(flash_file_path)
         for page in range(1, 999):
-            print_debug(f'Getting releases page {page}')
+            Logger.debug(f'Getting releases page {page}')
             releases = get_github_data(
                 repo, f'releases?per_page=50&page={page}')
             if len(releases) == 0:
-                print_debug(f'No more release found for page {page}')
+                Logger.debug(f'No more release found for page {page}')
                 break
             for release_entry in [AttributeDict(platform) for platform in releases]:
                 packages.add_package(PlatformRelease(flash_file_path, release_entry, build_dir,
@@ -588,14 +603,14 @@ class Releases():
                         break
 
         except Exception as e:
-            print_error(
+            Logger.error(
                 f'Unable to get commit list starting at {last.id}: {e}')
 
         return commit_list
 
     @classmethod
     def get_commit_list_descriptions(cls) -> str:
-        return '<<~EOD\n### Revision Log\n'+NEWLINE_CHAR.join(cls.get_commit_list())+'\n~EOD'
+        return '<<~EOD\n### Revision Log\n'+Logger.NEWLINE_CHAR.join(cls.get_commit_list())+'\n~EOD'
 
     def update(self, *args, **kwargs):
         if args:
@@ -626,34 +641,27 @@ def parse_json(filename: str):
     try:
         with open(fname) as f:
             content = f.read()
-            print_debug(f'Loading json\n{content}')
+            Logger.debug(f'Loading json\n{content}')
             return json.loads(content)
     except JSONDecodeError as ex:
-        print_error(f'Error parsing {content}')
+        Logger.error(f'Error parsing {content}')
     except Exception as ex:
-        print_error(
-            f"Unable to parse flasher args json file. Content of {folder}:{NEWLINE_CHAR.join(get_file_list(folder))}")
+        Logger.error(
+            f"Unable to parse flasher args json file. Content of {folder}:{Logger.NEWLINE_CHAR.join(get_file_list(folder))}")
         raise
 
 
-def write_github_env(args):
-    print(f'Writing environment details to {args.env_file}...')
-    with open(args.env_file,  "w") as env_file:
-        for attr in [attr for attr in dir(github_env) if not attr.startswith('_')]:
-            line = f'{attr}{"=" if attr != "description" else ""}{getattr(github_env,attr)}'
+def write_github_env_file(values,env_file):
+    print(f'Writing content to {env_file}...')
+    with open(env_file,  "w") as env_file:
+        for attr in [attr for attr in dir(values) if not attr.startswith('_')]:
+            line = f'{attr}{"=" if attr != "description" else ""}{getattr(values,attr)}'
             print(line)
             env_file.write(f'{line}\n')
-            os.environ[attr] = str(getattr(github_env, attr))
-    print(f'Done writing environment details to {args.env_file}!')
+            os.environ[attr] = str(getattr(values, attr))
+    print(f'Done writing to {env_file}!')
 
 
-def set_workflow_output(args):
-    print(f'Outputting job variables ...')
-    for attr in [attr for attr in dir(github_env) if not attr.startswith('_')]:
-        print(f'::set-output name={attr}::{getattr(github_env,attr)}')
-        os.environ[attr] = str(getattr(github_env, attr))
-    print(f'Done outputting job variables!')
-
 
 def format_artifact_from_manifest(manif_json: AttributeDict):
     if len(manif_json) == 0:
@@ -674,7 +682,19 @@ def handle_build_flags(args):
     github_env.release_flag = 1 if args.mock or args.force or 'release' in commit_message.lower() else 0
     github_env.ui_build = 1 if args.mock or args.ui_build or '[ui-build]' in commit_message.lower(
     ) or github_env.release_flag == 1 else 0
-    set_workflow_output(github_env)
+    write_github_env_file(github_env,os.environ.get('GITHUB_OUTPUT'))
+
+def write_version_number(file_path:str,env_details):
+    #     app_name="${TARGET_BUILD_NAME}.${DEPTH}.dev-$(git log --pretty=format:'%h' --max-count=1).${branch_name}" 
+    #     echo "${app_name}">version.txt
+    try:
+        version:str = f'{env_details.TARGET_BUILD_NAME}.{env_details.DEPTH}.{env_details.major}.{env_details.BUILD_NUMBER}.{env_details.branch_name}'
+        with open(file_path,  "w") as version_file:
+            version_file.write(version)
+    except Exception as ex:
+        Logger.error(f'Unable to set version string {version} in file {file_path}')
+        raise Exception('Version error')
+    Logger.notice(f'Firmware version set to {version}')
 
 
 def handle_environment(args):
@@ -706,7 +726,8 @@ def handle_environment(args):
     github_env.artifact_bin_file_name = f"{github_env.artifact_prefix}.bin"
     github_env.PROJECT_VER = f'{args.node}-{ args.build }'
     github_env.description = Releases.get_commit_list_descriptions()
-    write_github_env(args)
+    write_github_env_file(github_env,args.env_file)
+    write_version_number("version.txt",github_env)
 
 
 def handle_artifacts(args):
@@ -722,7 +743,7 @@ def handle_artifacts(args):
             os.makedirs(target_dir, exist_ok=True)
             shutil.copyfile(source, target, follow_symlinks=True)
         except Exception as ex:
-            print_error(f"Error while copying {source} to {target}\nContent of {target_dir}:\n{NEWLINE_CHAR.join(get_file_list(os.path.dirname(attr[0].rstrip())))}")
+            Logger.error(f"Error while copying {source} to {target}\nContent of {target_dir}:\n{Logger.NEWLINE_CHAR.join(get_file_list(os.path.dirname(attr[0].rstrip())))}")
             raise
 
 
@@ -731,16 +752,16 @@ def delete_folder(path):
     for root, dirs, files in os.walk(path, topdown=True):
         for dir in dirs:
             fulldirpath = os.path.join(root, dir)
-            print_debug(f'Drilling down in {fulldirpath}')
+            Logger.debug(f'Drilling down in {fulldirpath}')
             delete_folder(fulldirpath)
         for fname in files:
             full_path = os.path.join(root, fname)
-            print_debug(f'Setting file read/write {full_path}')
+            Logger.debug(f'Setting file read/write {full_path}')
             os.chmod(full_path, stat.S_IWRITE)
-            print_debug(f'Deleting file {full_path}')
+            Logger.debug(f'Deleting file {full_path}')
             os.remove(full_path)
     if os.path.exists(path):
-        print_debug(f'Changing folder read/write {path}')
+        Logger.debug(f'Changing folder read/write {path}')
         os.chmod(path, stat.S_IWRITE)
         print(f'WARNING: Deleting Folder {path}')
         os.rmdir(path)
@@ -797,7 +818,7 @@ def handle_manifest(args):
         man['builds'][0]['parts'] = release.process_files(args.outdir)
         man['name'] = release.platform()
         man['version'] = release.release_details.version
-        print_debug(f'Generated manifest: \n{json.dumps(man)}')
+        Logger.debug(f'Generated manifest: \n{json.dumps(man)}')
         fullpath = os.path.join(args.outdir, release.get_manifest_name())
         print(f'Writing manifest to {fullpath}')
         with open(fullpath, "w") as f:
@@ -827,7 +848,7 @@ def copy_no_overwrite(source: str, target: str):
             print(f'Copying {f} to target')
             shutil.copy(source_file, target_file)
         else:
-            print_debug(f'Skipping existing file {f}')
+            Logger.debug(f'Skipping existing file {f}')
 
 
 def get_changed_items(repo: Repository) -> Dict:
@@ -850,7 +871,7 @@ def push_with_method(auth_method:str,token:str,remote: Remote,reference):
         remote.push(reference, callbacks=RemoteCallbacks(pygit2.UserPass(auth_method, token)))
         success=True
     except Exception as ex:
-        print_error(f'Error pushing with auth method {auth_method}: {ex}.')
+        Logger.error(f'Error pushing with auth method {auth_method}: {ex}.')
     return success
 
 def push_if_change(repo: Repository, token: str, source_path: str, manif_json):
@@ -872,11 +893,11 @@ def push_if_change(repo: Repository, token: str, source_path: str, manif_json):
         remote: Remote = repo.remotes['origin']
         auth_methods = ['x-access-token','x-oauth-basic']
         for method in auth_methods:
-            if push_with_method('x-access-token', token, remote, [reference]):
+            if push_with_method(method, token, remote, [reference]):
                 print(f'::notice Web installer updated for {format_artifact_from_manifest(manif_json)}')
                 return
-            
-        raise Exception('Unable to push web installer changes to installer repo')
+        raise Exception('Unable to push web installer.')    
+
     else:
         print(f'WARNING: No change found. Skipping update')
 
@@ -921,8 +942,8 @@ def handle_show(args):
 def extract_files_from_archive(url):
     tempfolder = tempfile.mkdtemp()
     platform:Response = requests.get(url)
-    print_debug(f'Downloading {url} to {tempfolder}')
-    print_debug(f'Transfer status code: {platform.status_code}. Expanding content')
+    Logger.debug(f'Downloading {url} to {tempfolder}')
+    Logger.debug(f'Transfer status code: {platform.status_code}. Expanding content')
     z = zipfile.ZipFile(io.BytesIO(platform.content))
     z.extractall(tempfolder)
     return tempfolder
@@ -930,7 +951,11 @@ def extract_files_from_archive(url):
 
 def handle_list_files(args):
     print(f'Content of {args.cwd}:')
-    print(NEWLINE_CHAR.join(get_file_list(args.cwd)))
+    print(Logger.NEWLINE_CHAR.join(get_file_list(args.cwd)))
+
+def handle_commits(args):
+    set_workdir(args)
+    print(Releases.get_commit_list_descriptions())
 
 
 parser_environment.set_defaults(func=handle_environment, cmd='environment')
@@ -939,11 +964,13 @@ parser_pushinstaller.set_defaults(func=handle_pushinstaller, cmd='installer')
 parser_show.set_defaults(func=handle_show, cmd='show')
 parser_build_flags.set_defaults(func=handle_build_flags, cmd='build_flags')
 parser_dir.set_defaults(func=handle_list_files, cmd='list_files')
+parser_commits.set_defaults(func=handle_commits,cmd='list_commits')
 
 
 def main():
     exit_result_code = 0
     args = parser.parse_args()
+    Logger.with_crlf = args.with_crlf
     print(f'::group::{args.command}')
     print(f'build_tools version : {tool_version}')
     print(f'Processing command {args.command}')
@@ -955,7 +982,7 @@ def main():
         try:
             func(args)
         except Exception as e:
-            print_error(f'Critical error while running {args.command}\n{" ".join(traceback.format_exception(etype=type(e), value=e, tb=e.__traceback__))}')
+            Logger.error(f'Critical error while running {args.command}\n{" ".join(traceback.format_exception(etype=type(e), value=e, tb=e.__traceback__))}')
             exit_result_code = 1
     else:
         # No subcommand was provided, so call help

main/Kconfig.projbuild

@@ -117,7 +117,7 @@ menu "Squeezelite-ESP32"
 			string
 			default "dc=27,data=19,clk=18" if TWATCH2020	
 			default "mosi=15,miso=2,clk=14"	if MUSE
-			default	""
+			default	""          
 		config DISPLAY_CONFIG
 			string
 			default "SPI,driver=ST7789,width=240,height=240,cs=5,back=12,speed=16000000,HFlip,VFlip" if TWATCH2020
@@ -125,7 +125,7 @@ menu "Squeezelite-ESP32"
 		config ETH_CONFIG
 			string
 			default ""
-		# AGGREGATES - end							
+		# AGGREGATES - end		
 		config DAC_CONTROLSET
 			string
 			default "{ \"init\": [ {\"reg\":41, \"val\":128}, {\"reg\":18, \"val\":255} ], \"poweron\": [ {\"reg\":18, \"val\":64, \"mode\":\"or\"} ], \"poweroff\": [ {\"reg\":18, \"val\":191, \"mode\":\"and\"} ] }" if TWATCH2020
@@ -168,6 +168,9 @@ menu "Squeezelite-ESP32"
 			int
 			default 13 if SQUEEZEAMP
 			default -1
+		config SET_GPIO
+			string
+			default "0=ir" if SQUEEZEAMP
 	endmenu
 
 	menu "Audio settings"
@@ -342,14 +345,15 @@ menu "Squeezelite-ESP32"
 				data=<gpio>,clk=<gpio>[,d/c=<num>][,host=<0|1|2>]
 		config SET_GPIO
 			string "Special GPIO configuration"
-			default ""
 			help
 				Set parameters of shared GPIO with special values.
-				<gpio_1>=Vcc|GND|amp[:0|1]|jack[:0|1][,<gpio_n>=Vcc|GND|amp[:0|1]|jack[:0|1]]
+				<gpio_1>=Vcc|GND|amp[:0|1]|jack[:0|1][ir][spkfault[:0|1][,<gpio_n>=Vcc|GND|amp[:0|1]|jack[:0|1]]
 				'amp'  => GPIO that is set when playback starts
 				'jack' => GPIO used for audio jack detection
 				'green', 'red' => GPIO for status LED
-				'[:0|1] means set the active value for that GPIO can be low or high
+				'spkfault' => GPIO used for speaker fault detection
+				'ir' => GPIO used for Infrared Receiver
+				[:0|1] means set the active value for that GPIO can be low or high
 		config ROTARY_ENCODER
 			string "Rotary Encoder configuration"
 			default ""

main/esp_app_main.c

@@ -312,8 +312,22 @@ void register_default_with_mac(const char* key,  char* defval) {
 void register_default_nvs(){
 #ifdef CONFIG_CSPOT_SINK
 	register_default_string_val("enable_cspot", STR(CONFIG_CSPOT_SINK));
-#else
-	register_default_string_val("enable_cspot", "0");
+	cJSON * cspot_config=config_alloc_get_cjson("cspot_config");
+	if(!cspot_config){
+		char * name = alloc_get_string_with_mac(DEFAULT_HOST_NAME);
+		if(name){
+			cjson_update_string(&cspot_config,"deviceName",name);
+			cjson_update_number(&cspot_config,"bitrate",160);
+			// the call below saves the config and frees the json pointer
+			config_set_cjson_str_and_free("cspot_config",cspot_config);
+			FREE_AND_NULL(name);
+		}
+		else {
+			register_default_string_val("cspot_config", "");
+		}
+		
+	}	
+
 #endif
 	
 #ifdef CONFIG_AIRPLAY_SINK
@@ -379,23 +393,6 @@ void register_default_nvs(){
     register_default_string_val("ethtmout","8");
     register_default_string_val("dhcp_tmout","8");
 	register_default_string_val("target", CONFIG_TARGET);
-
-	cJSON * cspot_config=config_alloc_get_cjson("cspot_config");
-	if(!cspot_config){
-		char * name = alloc_get_string_with_mac(DEFAULT_HOST_NAME);
-		if(name){
-			cjson_update_string(&cspot_config,"deviceName",name);
-			cjson_update_number(&cspot_config,"bitrate",160);
-			// the call below saves the config and frees the json pointer
-			config_set_cjson_str_and_free("cspot_config",cspot_config);
-			FREE_AND_NULL(name);
-		}
-		else {
-			register_default_string_val("cspot_config", "");
-		}
-		
-	}
-
 	wait_for_commit();
 	ESP_LOGD(TAG,"Done setting default values in nvs.");
 }

sdkconfig.defaults

@@ -262,7 +262,7 @@ CONFIG_AIRPLAY_PORT="5000"
 # Various I/O
 #
 CONFIG_I2C_CONFIG=""
-CONFIG_SET_GPIO=""
+# CONFIG_SET_GPIO= is not set
 CONFIG_ROTARY_ENCODER=""
 # end of Various I/O