Update README.md

README.md

@@ -661,7 +661,9 @@ If you have already cloned the repository and you are getting compile errors on
 - libmad has been patched to avoid using a lot of stack and is not provided here. There is an issue with sync detection in 1.15.1b from where the original stack patch was done but since a few fixes have been made wrt sync detection. This 1.15.1b-10 found on debian fixes the issue where mad thinks it has reached sync but has not and so returns a wrong sample rate. It comes at the expense of 8KB (!) of code where a simple check in squeezelite/mad.c that next_frame[0] is 0xff and next_frame[1] & 0xf0 is 0xf0 does the trick ...
 
 # Hardware tips
-There is a possibility to have a software on/off where a temporary switch can power-up the esp32 which then will auto-sustain its power. Depending on the selected hardware, it a can also include a power-off by using a long press on the same button. The auto-power is simply acheived by using `setGPIO` and forcing a GPIO to Vcc or GND and the sustain on/off requires a button creation whose longpress is an ACTRLS_SLEEP action (see also the Sleeping(#sleeping) section. See schedmatics below, credits @https://github.com/Renber78.
+There is a possibility to have a software on/off where a temporary switch can power-up the esp32 which then will auto-sustain its power. Depending on the selected hardware, it a can also include a power-off by using a long press on the same button. 
+
+The auto-power is simply acheived by using `setGPIO` and forcing a GPIO to Vcc or GND and the sustain on/off requires a button creation whose longpress is an ACTRLS_SLEEP action (see also the [Sleeping](#sleeping)) section. See schedmatics below, credits @https://github.com/Renber78.
 
 ![alt text](https://github.com/sle118/squeezelite-esp32/blob/7eb4b218e31aa4692c5280fbec4619f690032c4a/Soft%20Power.png)