mirror of
https://github.com/jomjol/AI-on-the-edge-device.git
synced 2025-12-08 12:36:52 +03:00
10 lines
1.2 KiB
Markdown
10 lines
1.2 KiB
Markdown
# Parameter `MaxRateValue`
|
|
Default Value: `0,05`
|
|
|
|
Maximum allowed change between two readings, if exceeded the last reading will be rejected. Depending on the settings of `<NUMBER>.MaxRateType` the `MaxRateValue` is either treated as the difference between the two measurements (`AbsoluteChange` = difference) not taking the set time interval into account or as the difference normalized to the interval (`RateChange` = difference per minute).
|
|
|
|
If negative rate is disallowed and no maximum rate value is set, one false high reading will lead to a period of missing measurements until the measurement reaches the previous false high reading. E.g. if the counter is at `600,00` and it's read incorrectly as` 610,00`, all measurements will be skipped until the counter reaches `610,00`. Setting the MaxRateValue to `0,05` leads to a rejection of all readings with a difference `> 0,05`, in this case `610,00`. The rejection also applies to correct readings with a difference `> 0,05`!
|
|
|
|
!!! Note
|
|
If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.MaxRateValue`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
|