AI-on-the-edge-device

mirror of https://github.com/jomjol/AI-on-the-edge-device.git synced 2025-12-06 11:36:51 +03:00

Author	SHA1	Message	Date
CaCO3	5e5d2e2f72	Fix timezone config parser (#2169 ) * make sure to parse the whole config line * fix crash on empty timezone parameter --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-03-12 17:01:04 +01:00
Frank Haverland	512d7f95b4	Testcase for #2145 and debug-log (#2151 ) * new models ana-cont-11.0.5, ana-class100-1.5.7, dig-class100-1.6.0 * Testcase for #2145 Added debug log, if allowNegativeRates is handeled	2023-03-11 11:19:29 +01:00
Slider0007	431df73e52	Fix mqtt enable (#2144 )	2023-03-08 17:42:43 +01:00
Slider0007	ce00192684	Print startblock after NTP snyc only once (#2129 )	2023-03-05 19:14:45 +01:00
CaCO3	2dfd55e1c3	move Wifi, LWIP and BSSI to PSRAm (#2117 ) Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-03-05 08:43:37 +01:00
CaCO3	f84f20b2e8	Set CPU frequency (#2125 ) * move Wifi, LWIP and BSSI to PSRAm * Allow setting the CPU frequency to 240 MHz (default: 160 MHz) * . * . * . * . * Update sdkconfig.defaults --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-03-05 08:31:07 +01:00
CaCO3	806adcb4d0	Use PSRAM for MQTT publishing and make it scheduled (#2113 ) * Run the Homeassistant Discovery directly after connecting to the broker. Before it was delayed 10s and happened while the first round alredy was in progress * schedule sending HA discovery and static topics * Allow setting QOS for MQTT topics * . * . * change MQTT QOS1 expiration time from (default) 30 to 5s * add logging of heap change on MQTT topic sendings * wait for MQTT transmission timeout after publishing * use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap * . * use PSRAM for the MQTT outbox * use QOS1 for HA discovery again * . * . * disable delay, not needed with PSRAM * . * consolidated scheduledSendingOf_DiscoveryAndStaticTopics into sendingOf_DiscoveryAndStaticTopics_scheduled * Send Homeasstsiatnt Discovery and static data in MQTT step instead of when the wifi gets connected * "WIFI roaming" by channel scan (AP switching at low RSSI) (#2120) * Activate 802.11kv wifi mesh roaming * Activate roaming by scanning * Revert stack reducation * move Wifi, LWIP and BSSI to PSRAm * added State Class "measurement" to rate_per_time_unit (#2116) Co-authored-by: CaCO3 <caco@ruinelli.ch> * use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap * use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap # Conflicts: # code/components/jomjol_mqtt/server_mqtt.cpp # Conflicts: # code/components/jomjol_mqtt/server_mqtt.cpp * . * . * move to next PR * Update code/components/jomjol_mqtt/server_mqtt.cpp * Update code/components/jomjol_mqtt/server_mqtt.cpp --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com>	2023-03-05 07:57:54 +01:00
Attila Darazs	4dc4752823	Add GJ (gigajoule) as an energy meter unit (#2114 ) Some district heating meters are displaying their values in GJ and Home Assistant is also capable of accepting heating values in this format.	2023-03-04 18:31:32 +01:00
CaCO3	827423023c	added State Class "measurement" to rate_per_time_unit (#2116 ) Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-03-04 13:16:23 +01:00
Slider0007	6ca7897fa0	"WIFI roaming" by channel scan (AP switching at low RSSI) (#2120 ) * Activate 802.11kv wifi mesh roaming * Activate roaming by scanning * Revert stack reducation	2023-03-04 11:49:08 +01:00
CaCO3	39b8b5b07c	updated log message	2023-03-02 20:44:21 +01:00
Slider0007	d3d241c7b9	Logfile: Print start indication block after time sync (#2106 ) * logfile: Print start indication after time sync * No time set at boot -> keep log_1970-01-01.txt	2023-03-01 20:55:12 +01:00
CaCO3	8c7e86fea4	Master (#2104 ) * Replace deprecated actions (#2016) * Update build.yaml * Update build.yaml * Update manual-update-webinstaller.yml * Update manual-update-webinstaller.yml * Update manual-update-webinstaller.yml * Update manual-update-webinstaller.yml * Update build.yaml * preparations for v15.0 (#2063) * Migrated parameters, see https://github.com/jomjol/AI-on-the-edge-device/pull/2023 * remove no longer used "topic" parameter. This is a backport from `b21e3c6c9d` * Fix wrong url-encoding, see https://github.com/jomjol/AI-on-the-edge-device/issues/2036 resp. https://github.com/jomjol/AI-on-the-edge-device/issues/2036 * Threashold -> Threshold * updated changelog --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * DataLogActive is true by default * updated changelog * Bugfix #1933 (again :-)) * Update Influxdb * re-add missing dropdownbox filling for Postprocessing Individual Parameters * stop auto filling the release notes, it causes more confusion than it helps * Update Changelog.md --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>	2023-03-01 20:54:14 +01:00
CaCO3	a7dc37761b	The raw topic should have no unit and must be State Class "None", so it is handled as a string (#2103 ) Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-28 20:57:15 +01:00
Slider0007	2dd2d03f6c	SD card basic R/W check + folder/file presence check (#2085 ) * SD card basic RW check + folder structure check * Default LED blink repeat 2x * Abort booting when SD basic R/W check failed * SD R/W error+missing folder,file > load reduced UI	2023-02-28 18:25:27 +01:00
CaCO3	a1a77ae5d9	Improve MQTT (#2091 ) * moved functions * use hostname as default MQTT maintopic if parameter is not set * use hostname as default MQTT client ID * Only send Homassistant Discovery and Static Topics on the first connect. Retry in next round if any topic failed * . * add missing return code usage * send maintopic/connection on every round like the system topics --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-27 18:26:46 +01:00
CaCO3	9a9aa68a65	do not show value on recognition page (#2083 ) * do not show value on recognition page * . * . * . * . --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-26 18:28:26 +01:00
CaCO3	90fa44380c	Migrate some UART logs to Logfile logs (#2079 ) * repolaced ESP_LOGE() with LogFile.WriteToFile(ESP_LOG_ERROR() * converted more UART logs to logfile logs --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-25 21:18:56 +01:00
Slider0007	7a9f61a8d8	Boot phase: Add more error handling + provide verbose output in error cases (#2020 ) * WLAN: add error handling * WLAN: parameter global struct * WLAN.ini -> more info text * RSSIThreshold * Rename logs * Boot process: error handling * Update texts * Comments * Init sequence * Prepare for check dir creation * add check makedir, update logs * Blink code for OTA+SoftAP * Blink code for missing time snyc * Update * reboot -> switch LED off * Update log texts * Update * Update log texts * create empty default folders at startup * Update * Adapt log level * Print log level switch * Update * Update text * Add SD free space to log * WIFI/MQTT disconnect message set to WARN (+ ERROR)	2023-02-25 21:12:52 +01:00
CaCO3	7b2a80a13d	Enhance pages (#2075 ) * enhance pages * . * . * . * . * . * . --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-25 14:20:55 +01:00
CaCO3	886cd4ffa5	Master (#2073 ) * Replace deprecated actions (#2016) * Update build.yaml * Update build.yaml * Update manual-update-webinstaller.yml * Update manual-update-webinstaller.yml * Update manual-update-webinstaller.yml * Update manual-update-webinstaller.yml * Update build.yaml * preparations for v15.0 (#2063) * Migrated parameters, see https://github.com/jomjol/AI-on-the-edge-device/pull/2023 * remove no longer used "topic" parameter. This is a backport from `b21e3c6c9d` * Fix wrong url-encoding, see https://github.com/jomjol/AI-on-the-edge-device/issues/2036 resp. https://github.com/jomjol/AI-on-the-edge-device/issues/2036 * Threashold -> Threshold * updated changelog --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> * DataLogActive is true by default * updated changelog --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-24 20:22:04 +01:00
CaCO3	2c1a7f4c9e	DataLogActive is true by default	2023-02-23 23:39:02 +01:00
CaCO3	025f4af9f2	V14.1 backport to rolling (#2058 ) * Migrate parameters to v14.1 branch (#2023) * Migrated parameters * - * . * . * . * . * . * Remove unneeded checkboxes for true/false * Remove ";" * Correct MaintTopic * Added missing parameters to UI: FlipImageSize, InitialMirror Removed checkbox in UI for ErrorMessage Added migration of pboolean parameters: enable them if they where disabled, set them to their default value, then enable them Switch SetRetainFlag internally to a boolean * . * CamImages -> RawImages * CamImages -> RawImages * catch error on unknown parameter * fix missing case insensitivity * fix typo * fixmissing rename * fix migration of ExtendedResolution * Delete ClassFlowMakeImage.cpp * Delete ClassFlowMakeImage.h --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Changelog.md --------- Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>	2023-02-21 23:18:24 +01:00
CaCO3	2ed9fb8eb5	Create folders as needed (#2056 ) * allow longer file paths * create folders as needed --------- Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-02-21 22:14:09 +01:00
Slider0007	10da8c4f94	Support saturation & contrast (#2048 ) * reference image: use correct value for contrast * Update quality, contrast & saturation parameter * fix for saturation,contrast+error handling	2023-02-19 21:15:16 +01:00
jomjol	5bac1c68d9	Correct BugFix in InfluxDB	2023-02-18 12:46:14 +01:00
jomjol	008dba7e11	fix for #2036	2023-02-18 11:44:56 +01:00
jomjol	1acd72d33e	Implement InfluxDB v2 (#2004 ) * Implement InfluxDBv2 Innitial * Update incl. UI * Correct UI * Update UI - Indiv. Param. * Update edit_config_param.html * Correct Timeshift * Update Fieldname	2023-02-09 20:13:08 +01:00
jomjol	795bcd0d21	Merge branch 'InfluxDB-Fix-Timeshift' into rolling	2023-02-08 20:31:17 +01:00
jomjol	a9c5bebb45	Update interface_influxdb.cpp	2023-02-08 19:56:28 +01:00
jomjol	4424337a4e	Merge branch 'Increase-max-JPG-size'	2023-02-05 16:00:52 +01:00
Slider0007	55efc3b3f4	wifi disconnect before deinit (#1978 )	2023-02-05 08:09:53 +01:00
jomjol	34a3d6d6e3	Merge branch 'Increase-max-JPG-size' into rolling	2023-02-04 21:38:37 +01:00
Slider0007	2ee85001eb	Cleanup defines.h (#1967 ) * Update defines.h * Update: Disable USE_HIMEM_IF_AVAILABLE	2023-02-03 21:02:32 +01:00
Nicolas Liaudat	1d2f920819	Option alignment algo off (#1924 ) * Update edit_config_param.html * Update ClassFlowAlignment.cpp	2023-02-03 21:01:43 +01:00
Slider0007	0ddcbbc847	Revert "Disable USE_HIMEM_IF_AVAILABLE" This reverts commit `d40d5ba0f6`.	2023-02-02 21:48:22 +01:00
Slider0007	bbd60c9d19	Revert "Increase max JPG size (128k->160k)" This reverts commit `a851fd393c`.	2023-02-02 21:46:00 +01:00
jomjol	fa69272a57	v14.0.0 RC9 (#1965 ) * Master (#1958) * Release Preparations (#1925) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md * Update Changelog.md * Rearange task to CPU (http, camera, mqtt) (#1557) * Streamlined MQTT interlock when not activated & interlock MQTT when WIFI is not connected (#1556) * streamlined mqtt interlock when disabled * Disconnect mqtt client before reboot * Interlock MQTT with WIFI * Update * loglevel to DEBUG * Update * mqtt msg id incremental * new ENABLE_MQTT includes * Loglevel to DEBUG * Loglevel * Update interface_mqtt.cpp * show uptime on overview page, moved labels from firmware to Web UI (#1543) * show uptime on overview page, moved labels from firmware to Web UI * show uptime on info page * also use formated time in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * Continue boot on bad PSRAM (#1558) * add sensor status, show special index/setup page in case of a critical error * continue booting on PSRAM error * Update main.cpp added log messages * init PSRAM and add more log messages * cleanup of init checks * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * add sensor status, show special index/setup page in case of a critical error (#1560) * add sensor status, show special index/setup page in case of a critical error * Added Reboot * . * added more buttons Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Webinstaller to v13.0.7 * remove html-from-11.3.1 in release (#1565) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota Co-authored-by: github-actions <github-actions@github.com> * make the sidebar on the overviw page wider and show the round counter (#1570) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create reply-bot.yml * Update ClassFlowPostProcessing.cpp * Add bot (#1581) * Update reply-bot.yml * Create label-commenter-config.yml * added missing html change * extended instructions (#1583) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix Rate Problem * removed redundant "Status:" * Bugfix Double Extract ZIP-Files * Update FeatureRequest.md (#1591) in case of position change between the measurments set this state to true, if there is no change set it back to false. In a defined time window this movement can lead into an alarm state / water leak.. haveing this state in the mqtt broker can trigger functions like closing the ater pipe walve and so on... * Update manifest.json * Delete .gitignore * Delete .gitmodules * Delete firmware.bin * Add files via upload * Block REST API calls till resource is ready (#1609) * Block REST API call till ressource is ready * Update * Update * Update * replace relative include of gethost.js with absolute one. This is needed as that file gets incuded on dynamically generated content which can be on different path levels (#1610) Co-authored-by: CaCO3 <caco@ruinelli.ch> * esp_spiram.h has been replaced by esp32/spiram.h (#1605) * esp_spiram.h has been replaced by esp32/spiram.h * Preparations for next Bugfix Release (#1615) * Merge branch 'rolling' (#1559) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * Update Changelog.md for release Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * new model version (#1619) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md (#1630) * Correct RenameNumber * Update Changelog.md * Fix reloading of data file (#1635) * Update data.html * fixed * show link to graph Co-authored-by: CaCO3 <caco@ruinelli.ch> * Centralizing the defines (#1624) * defines changes * Finish #define move + #define STBI_ONLY_JPEGsave 2% of Flash * remove the defines on the old places * ClassFlowCNNGeneral in define.h * revert to origin * fix translation not ready * Update defines.h * Update WebInstaller * Code translation (#1626) * comment translation * translation part #2 * code translation from DE to ENG #part3 * translation #4 * dismantled =>splitted * bereich => range * Update defines.h Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update manifest.json * Add files via upload * #ifndef in .h + #pragma once (#1639) Update defines.h (#1640) comment #define STBI_ONLY_JPEG as you do no want it in rolling but in rolling-minimize-firmware-size delete old reference to DE ''' #define AnalogFehler 3 #define AnalogToDigtalFehler 0.8 #define DigitalUnschaerfe 0.2 #define DigitalBand 3 #define DigitalAnalogerVorgaengerUebergangsbereich 2 #define DigitalUebergangsbereichVorgaenger 0.7 // 9.3 - 0.7 #define DigitalUebergangsbereichVorlauf 9.7 ''' * Trigger a flow start by REST API or MQTT (#1648) * Trigger flow start by Rest API * Increase handlers * Update * Update * Update * Change max handlers * Add debug message * Trigger flow start by MQTT * Update * Remove unused function * Remove handler_doflow + routines * Cleanup * MergeCheck * Optimize logfile write (#1652) * remove no longer needed OpenFileAndWait() * remove WriteToDedicatedFile * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * show release in log instead of branch (#1660) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update sdkconfig.defaults (#1661) Reverting changes of `sdkconfig.defaults` falsly added within https://github.com/jomjol/AI-on-the-edge-device/pull/1626 * Init GPIO handler before MQTT init (#1663) * Update HTML & Firmware (#1671) * Remove unnecessary null pointer checks #1649 (#1673) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 * Remove unnecessary null pointer checks #1649 Co-authored-by: github-actions <github-actions@github.com> * Improve NTP handling (#1676) * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) * re-implemented SNTP usage, added way to disable NTP client, added timezone table * minor fixes Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) (#1664) Co-authored-by: CaCO3 <caco@ruinelli.ch> * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * make more robust, add log (#1690) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Extend Github Actions (#1680) * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * automate manifest update * Update build.yaml * revert changes to docs folder * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Add files via upload * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * automate manifest update # Conflicts: # docs/binary/firmware.bin # docs/binary/v12.0.1/firmware.bin # docs/binary/v12.0.5/firmware.bin # docs/binary/v13.0.5/firmware.bin # docs/binary/v13.0.7/firmware.bin * revert changes to docs folder * revert changes to docs folder # Conflicts: # docs/releases/download/firmware.bin * Update build.yaml Co-authored-by: CaCO3 <caco@ruinelli.ch> * Improve initial setup proc (#1692) * Initial Test * Initial functional version. * Add Bot Replies (#1701) * Update label-commenter-config.yml * Update reply-bot.yml * Update label-commenter-config.yml * disable remove-labels because they no longer work * delete img_convert.h as included in code\components\tflite-micro-esp-… (#1695) * delete img_convert.h as included in code\components\tflite-micro-esp-examples\components\esp32-camera\conversions\include\img_converters.h * macro definition #ifdef ENABLE_SOFTAP * macro definition #ifdef ENABLE_SOFTAP (#1698) * macro definition #ifdef ENABLE_SOFTAP * Update platformio.ini * softap define in define.h * Update platformio.ini * #define WLAN_CONFIG_FILE "/sdcard/wlan.ini" Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Deinit components before reboot (#1704) * Deinit all components before reboot * Update * Update * fetch index.html after reboot -> less 404 (#1705) * Safe optimizations (#1706) * safe optimizations * Merge branch 'rolling' of https://github.com/nliaudat/AI-on-the-edge-device into rolling * Enable SoftAP * Update defines * add a define to configure the logfile handling (#1709) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Move Logfile Switch to define.h * Update Reboot Algo * Update server_ota.cpp * Avoid loading of status infos twice (#1711) * Force a reboot even reboot task cannot be created due to lack of heap (#1713) * Deinit all components before reboot * Update * Update * Force reboot when reboot task cannot be created * Improve log message when web UI is incomplete (#1716) * improve warning if version.txt is missing * typo * show round duration in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix static IP in UP, improve explanation for HA (#1719) * fix static IP in UP, improve explanation for HA * Update edit_config_param.html Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create demo folder at startup (if not present) * Update defines.h (#1726) * improve explanations,added example (#1729) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Add demo mode (#1720) * move main part to cam file * added demo mode * . * add a define to configure the logfile handling (#1709) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Move Logfile Switch to define.h * Update Reboot Algo * Update server_ota.cpp * Avoid loading of status infos twice (#1711) * Force a reboot even reboot task cannot be created due to lack of heap (#1713) * Deinit all components before reboot * Update * Update * Force reboot when reboot task cannot be created * Improve log message when web UI is incomplete (#1716) * improve warning if version.txt is missing * typo * show round duration in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * . * . * . * creade demo dir * fix static IP in UP, improve explanation for HA (#1719) * fix static IP in UP, improve explanation for HA * Update edit_config_param.html Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create demo folder at startup (if not present) * move demo files * Update defines.h (#1726) * updated description * moved to expert section * fixed broken enabled state Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> * Fix regression of reboot handler / reboot waiting script (#1725) * Reboot after OTA: Avoid exeception * Overview - optimize reload behaviour after reboot * Update * Update * Moved softAP to the very first checks * Update SoftAP * Update build.yaml (#1737) * Update build.yaml * Update build.yaml * #1649 unnecessary np check (#1736) * consolidate test-ip definition, added missing Access-Control-Allow-Origin, * Revert "consolidate test-ip definition, added missing Access-Control-Allow-Origin," This reverts commit `56cfeb732e`. * consolidate test-ip definition, added missing Access-Control-Allow-Origin (#1741) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Replace alert boxes with overlay info boxes (#1742) * consolidate test-ip definition, added missing Access-Control-Allow-Origin * replace alert boxes with overlay info boxes * . * . * . * . * . * . * . * . * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * compiler optimization (#1749) compiler optimization for tflite-micro-esp-examples * Modify stack sizes + max open files (SD) , add REST handler for heap/(stack) infos (#1751) * Modify stack sizes+max open files,add rest handler * Update * Optimized CImageBasis * Update feature.yaml * cache static files (#1755) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Implemented Reboot for "firmware.bin" as well * new OTA page with progressbar (#1756) * new OTA page with progress bar * improve error message on missing demo files * . * Implemented Reboot for "firmware.bin" as well * Update feature.yaml * cache static files (#1755) Co-authored-by: CaCO3 <caco@ruinelli.ch> * . * . * added filename validation * . * . * . * move * added missing dash to regex * restrict file type * . * . * . * . * cleanup no longer needed mode * only start restart counter if restart is required Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Rolling-bot: Only show jomjol repo rollings (#1783) * Update platfromio.ini * Add option to disable brownout detector (#1784) * Update defines.h * Update main.cpp * Improve file server (#1785) * . * . * . * . * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Ignore cache on GIT hash change (new commit or release) (#1787) * Add hash to all html, css, and js URLs * Update build.yaml * Update build.yaml * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix overview.html * GPIO handler: Deinit before delete (#1795) * Rest handler: Use none chunked transfer (#1797) * Resthandler info,sysinfo,starttime: no chunk trans * flowstart,statusflow,cputemp,rssi,uptime,prevalue * Renamed error messages * STBI_ONLY_JPEG (#1789) * Add error handling for memory intensive tasks (#1798) * tflite model loading: error handling * FlowAlignment: error handling * CImageBasis+GetJPGStream : error handling * Update graph.html (#1802) * Delete demo-images directory Data is now provided in the documentation * REST handler sysinfo + MQTT topic: Free heap memory not reporting (#1815) * REST handler sysinfo: Fix reporting of free memory * MQTT topic freemem: Fix reporting of free memory * Refactor getEspHeapInfo routine (#1816) * Refactor getEspHeapInfo * ClassLogfile: Remove redundandent one * DataGraph: datafiles sorted -> newest on top (#1817) * plaformio [env:esp32cam-dev] : Add task analysis & test for 8m spiram real support (#1818) add support of TASK_ANALYSIS_ON test full support of 8mb spiram board (https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/himem.html) * Improve html roi disablement (#1825) * Improve ROI-Problem * Update * Update common.js * Update links * Store preprocessed image with ROI to RAM (#1809) * tflite model loading: error handling * FlowAlignment: error handling * CImageBasis+GetJPGStream : error handling * store preprocessed ALG_ROI.jpg to memory * Update * Create clean-branch-cache-after-pull-request-got-closed.yml * Clean sdkconfig (not default) (#1828) * Delete sdkconfig - Kopie.defaults * Delete sdkconfig.esp32cam-testing * Delete sdkconfig - Kopie.esp32cam * Update platformio.ini * Delete clean-branch-cache-after-pull-request-got-closed.yml * Update README.md * Esp32 sys info (#1829) * Add files via upload * Update defines.h * Update main.cpp * git ignore + sdkconfig.esp32cam-dev (#1830) * update build actions/cache@v3.2.3 (#1831) * actions/cache@v3.2.3 * Create clear _all_cache.yml * fix typo naming workflow clear_cache.yml * Update tflite * Initial Implementation (#1834) * Fix pointer call in ClassControllCamera.cpp:310 (#1833) ClassControllCamera.cpp:310:67: error: request for member 'rgb_image' in '_zwImage', which is of pointer type 'CImageBasis' ClassControllCamera.cpp:310:117: error: request for member 'width' in '_zwImage', which is of pointer type 'CImageBasis' ClassControllCamera.cpp:310:157: error: request for member 'height' in '_zwImage', which is of pointer type 'CImageBasis' Initial Implementation (#1835) * improve caching (#1836) * improve caching See https://github.com/actions/cache/blob/main/tips-and-workarounds.md#update-a-cache * Update build.yaml * Update build.yaml * Update build.yaml * Update README.md * Update build.yaml * Update build.yaml * Update README.md * Update build.yaml * Update label-commenter-config.yml * Fix uninitialized filename (#1838) * fix the uninitialized filename. It only got used for the logging in case the file exists but failed to get loaded (eg. /sdcard/log/data/data_2023-01-14.csv) * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show ways to get notified about new releases * update wiki references * enhance development environment (#1841) * add sdkconfig.defaults per environment https://github.com/platformio/platform-espressif32/issues/638 * add env to platformio * add sdkconfig.<pioenv>.defaults * Update platformio.ini * Update .gitignore * Delete sdkconfig.esp32cam-cpu-freq-240.defaults * Delete sdkconfig.esp32cam-dev-himem.defaults * Delete sdkconfig.esp32cam-dev.defaults * Delete sdkconfig.esp32cam-no-softap.defaults * Add files via upload * Update sdkconfig.esp32cam-cpu-freq-240.defaults * Update platformio.ini * Update platformio.ini * Update CMakeLists.txt * Update sdkconfig.esp32cam-dev.defaults * Update platformio.ini * add HIMEM debugging tools (check free size, and memory test) (#1852) * Update defines.h * Update esp_sys.h * Update esp_sys.cpp * Add files via upload * Update perfmon.c * Update main.cpp * Update main.cpp * Delete himem_memory_check.c * Add files via upload * Update defines.h * Update himem_memory_check.cpp * Update main.cpp * Update himem_memory_check.cpp * Update himem_memory_check.h * Update main.cpp * fix define * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show alternative images for states "Initialization" and "Take Image" (#1858) * Show image for flow not started + take image * Update * Adding new images * . * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * . * New state "initialization (delayed)", renaming * Overview: Renamed "Status" + switched position * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco3@ruinelli.ch> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> * restructure manual setup zip (#1897) * Update build.yaml * Update build.yaml * Update build.yaml * fix typos and wording on config page (#1898) * Update label-commenter-config.yml * Update label-commenter-config.yml * remove external Web UI dependencies (#1896) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Remove excessive whitespaces and newlines in json (#1904) * . * . * . * . * . * remove newlines in json as it is not needed * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * REST handler CPU temp / RSSI: Remove units (#1908) * REST CPU temp: escape special character * REST CPUTemp+RSSI: remove units, output as int * REST handler sysinfo: CPU tempature as integer * Update Changelog.md (#1893) * Update Changelog.md * Update Changelog.md * Update Changelog.md * Update Changelog.md * Update Index & Index.html * Move Update description to online docu * Update index.html * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Changelog.md --------- Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: Dave <43378003+dkneisz@users.noreply.github.com> * Update Changelog.md for release * Update Changelog.md * v14.0.0 RC2 (#1939) * Master (#1926) * Release Preparations (#1925) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md * Update Changelog.md * Rearange task to CPU (http, camera, mqtt) (#1557) * Streamlined MQTT interlock when not activated & interlock MQTT when WIFI is not connected (#1556) * streamlined mqtt interlock when disabled * Disconnect mqtt client before reboot * Interlock MQTT with WIFI * Update * loglevel to DEBUG * Update * mqtt msg id incremental * new ENABLE_MQTT includes * Loglevel to DEBUG * Loglevel * Update interface_mqtt.cpp * show uptime on overview page, moved labels from firmware to Web UI (#1543) * show uptime on overview page, moved labels from firmware to Web UI * show uptime on info page * also use formated time in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * Continue boot on bad PSRAM (#1558) * add sensor status, show special index/setup page in case of a critical error * continue booting on PSRAM error * Update main.cpp added log messages * init PSRAM and add more log messages * cleanup of init checks * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * add sensor status, show special index/setup page in case of a critical error (#1560) * add sensor status, show special index/setup page in case of a critical error * Added Reboot * . * added more buttons Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Webinstaller to v13.0.7 * remove html-from-11.3.1 in release (#1565) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota Co-authored-by: github-actions <github-actions@github.com> * make the sidebar on the overviw page wider and show the round counter (#1570) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create reply-bot.yml * Update ClassFlowPostProcessing.cpp * Add bot (#1581) * Update reply-bot.yml * Create label-commenter-config.yml * added missing html change * extended instructions (#1583) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix Rate Problem * removed redundant "Status:" * Bugfix Double Extract ZIP-Files * Update FeatureRequest.md (#1591) in case of position change between the measurments set this state to true, if there is no change set it back to false. In a defined time window this movement can lead into an alarm state / water leak.. haveing this state in the mqtt broker can trigger functions like closing the ater pipe walve and so on... * Update manifest.json * Delete .gitignore * Delete .gitmodules * Delete firmware.bin * Add files via upload * Block REST API calls till resource is ready (#1609) * Block REST API call till ressource is ready * Update * Update * Update * replace relative include of gethost.js with absolute one. This is needed as that file gets incuded on dynamically generated content which can be on different path levels (#1610) Co-authored-by: CaCO3 <caco@ruinelli.ch> * esp_spiram.h has been replaced by esp32/spiram.h (#1605) * esp_spiram.h has been replaced by esp32/spiram.h * Preparations for next Bugfix Release (#1615) * Merge branch 'rolling' (#1559) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * Update Changelog.md for release Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * new model version (#1619) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md (#1630) * Correct RenameNumber * Update Changelog.md * Fix reloading of data file (#1635) * Update data.html * fixed * show link to graph Co-authored-by: CaCO3 <caco@ruinelli.ch> * Centralizing the defines (#1624) * defines changes * Finish #define move + #define STBI_ONLY_JPEGsave 2% of Flash * remove the defines on the old places * ClassFlowCNNGeneral in define.h * revert to origin * fix translation not ready * Update defines.h * Update WebInstaller * Code translation (#1626) * comment translation * translation part #2 * code translation from DE to ENG #part3 * translation #4 * dismantled =>splitted * bereich => range * Update defines.h Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update manifest.json * Add files via upload * #ifndef in .h + #pragma once (#1639) Update defines.h (#1640) comment #define STBI_ONLY_JPEG as you do no want it in rolling but in rolling-minimize-firmware-size delete old reference to DE ''' #define AnalogFehler 3 #define AnalogToDigtalFehler 0.8 #define DigitalUnschaerfe 0.2 #define DigitalBand 3 #define DigitalAnalogerVorgaengerUebergangsbereich 2 #define DigitalUebergangsbereichVorgaenger 0.7 // 9.3 - 0.7 #define DigitalUebergangsbereichVorlauf 9.7 ''' * Trigger a flow start by REST API or MQTT (#1648) * Trigger flow start by Rest API * Increase handlers * Update * Update * Update * Change max handlers * Add debug message * Trigger flow start by MQTT * Update * Remove unused function * Remove handler_doflow + routines * Cleanup * MergeCheck * Optimize logfile write (#1652) * remove no longer needed OpenFileAndWait() * remove WriteToDedicatedFile * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * show release in log instead of branch (#1660) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update sdkconfig.defaults (#1661) Reverting changes of `sdkconfig.defaults` falsly added within https://github.com/jomjol/AI-on-the-edge-device/pull/1626 * Init GPIO handler before MQTT init (#1663) * Update HTML & Firmware (#1671) * Remove unnecessary null pointer checks #1649 (#1673) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 * Remove unnecessary null pointer checks #1649 Co-authored-by: github-actions <github-actions@github.com> * Improve NTP handling (#1676) * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) * re-implemented SNTP usage, added way to disable NTP client, added timezone table * minor fixes Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) (#1664) Co-authored-by: CaCO3 <caco@ruinelli.ch> * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * make more robust, add log (#1690) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Extend Github Actions (#1680) * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml … * Correct influx utc (#1964) * Update interface_influxdb.cpp * Correct to UTC --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: Dave <43378003+dkneisz@users.noreply.github.com>	2023-02-02 19:17:25 +01:00
jomjol	69583db99e	Correct influx utc (#1964 ) * Update interface_influxdb.cpp * Correct to UTC	2023-02-02 19:14:55 +01:00
Slider0007	4986b1936f	Fix initialflip issue	2023-02-02 16:45:26 +01:00
Slider0007	939271f2a0	buffer overflow check + error message	2023-02-02 00:01:41 +01:00
Slider0007	d40d5ba0f6	Disable USE_HIMEM_IF_AVAILABLE	2023-02-01 20:12:11 +01:00
Slider0007	a851fd393c	Increase max JPG size (128k->160k)	2023-02-01 19:49:48 +01:00
jomjol	2c9a6a0f5c	v14.0.0 RC2 (#1939 ) * Master (#1926) * Release Preparations (#1925) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md * Update Changelog.md * Rearange task to CPU (http, camera, mqtt) (#1557) * Streamlined MQTT interlock when not activated & interlock MQTT when WIFI is not connected (#1556) * streamlined mqtt interlock when disabled * Disconnect mqtt client before reboot * Interlock MQTT with WIFI * Update * loglevel to DEBUG * Update * mqtt msg id incremental * new ENABLE_MQTT includes * Loglevel to DEBUG * Loglevel * Update interface_mqtt.cpp * show uptime on overview page, moved labels from firmware to Web UI (#1543) * show uptime on overview page, moved labels from firmware to Web UI * show uptime on info page * also use formated time in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * Continue boot on bad PSRAM (#1558) * add sensor status, show special index/setup page in case of a critical error * continue booting on PSRAM error * Update main.cpp added log messages * init PSRAM and add more log messages * cleanup of init checks * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * add sensor status, show special index/setup page in case of a critical error (#1560) * add sensor status, show special index/setup page in case of a critical error * Added Reboot * . * added more buttons Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Webinstaller to v13.0.7 * remove html-from-11.3.1 in release (#1565) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota Co-authored-by: github-actions <github-actions@github.com> * make the sidebar on the overviw page wider and show the round counter (#1570) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create reply-bot.yml * Update ClassFlowPostProcessing.cpp * Add bot (#1581) * Update reply-bot.yml * Create label-commenter-config.yml * added missing html change * extended instructions (#1583) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix Rate Problem * removed redundant "Status:" * Bugfix Double Extract ZIP-Files * Update FeatureRequest.md (#1591) in case of position change between the measurments set this state to true, if there is no change set it back to false. In a defined time window this movement can lead into an alarm state / water leak.. haveing this state in the mqtt broker can trigger functions like closing the ater pipe walve and so on... * Update manifest.json * Delete .gitignore * Delete .gitmodules * Delete firmware.bin * Add files via upload * Block REST API calls till resource is ready (#1609) * Block REST API call till ressource is ready * Update * Update * Update * replace relative include of gethost.js with absolute one. This is needed as that file gets incuded on dynamically generated content which can be on different path levels (#1610) Co-authored-by: CaCO3 <caco@ruinelli.ch> * esp_spiram.h has been replaced by esp32/spiram.h (#1605) * esp_spiram.h has been replaced by esp32/spiram.h * Preparations for next Bugfix Release (#1615) * Merge branch 'rolling' (#1559) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * Update Changelog.md for release Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * new model version (#1619) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md (#1630) * Correct RenameNumber * Update Changelog.md * Fix reloading of data file (#1635) * Update data.html * fixed * show link to graph Co-authored-by: CaCO3 <caco@ruinelli.ch> * Centralizing the defines (#1624) * defines changes * Finish #define move + #define STBI_ONLY_JPEGsave 2% of Flash * remove the defines on the old places * ClassFlowCNNGeneral in define.h * revert to origin * fix translation not ready * Update defines.h * Update WebInstaller * Code translation (#1626) * comment translation * translation part #2 * code translation from DE to ENG #part3 * translation #4 * dismantled =>splitted * bereich => range * Update defines.h Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update manifest.json * Add files via upload * #ifndef in .h + #pragma once (#1639) Update defines.h (#1640) comment #define STBI_ONLY_JPEG as you do no want it in rolling but in rolling-minimize-firmware-size delete old reference to DE ''' #define AnalogFehler 3 #define AnalogToDigtalFehler 0.8 #define DigitalUnschaerfe 0.2 #define DigitalBand 3 #define DigitalAnalogerVorgaengerUebergangsbereich 2 #define DigitalUebergangsbereichVorgaenger 0.7 // 9.3 - 0.7 #define DigitalUebergangsbereichVorlauf 9.7 ''' * Trigger a flow start by REST API or MQTT (#1648) * Trigger flow start by Rest API * Increase handlers * Update * Update * Update * Change max handlers * Add debug message * Trigger flow start by MQTT * Update * Remove unused function * Remove handler_doflow + routines * Cleanup * MergeCheck * Optimize logfile write (#1652) * remove no longer needed OpenFileAndWait() * remove WriteToDedicatedFile * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * show release in log instead of branch (#1660) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update sdkconfig.defaults (#1661) Reverting changes of `sdkconfig.defaults` falsly added within https://github.com/jomjol/AI-on-the-edge-device/pull/1626 * Init GPIO handler before MQTT init (#1663) * Update HTML & Firmware (#1671) * Remove unnecessary null pointer checks #1649 (#1673) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 * Remove unnecessary null pointer checks #1649 Co-authored-by: github-actions <github-actions@github.com> * Improve NTP handling (#1676) * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) * re-implemented SNTP usage, added way to disable NTP client, added timezone table * minor fixes Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) (#1664) Co-authored-by: CaCO3 <caco@ruinelli.ch> * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * make more robust, add log (#1690) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Extend Github Actions (#1680) * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * automate manifest update * Update build.yaml * revert changes to docs folder * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Add files via upload * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * automate manifest update # Conflicts: # docs/binary/firmware.bin # docs/binary/v12.0.1/firmware.bin # docs/binary/v12.0.5/firmware.bin # docs/binary/v13.0.5/firmware.bin # docs/binary/v13.0.7/firmware.bin * revert changes to docs folder * revert changes to docs folder # Conflicts: # docs/releases/download/firmware.bin * Update build.yaml Co-authored-by: CaCO3 <caco@ruinelli.ch> * Improve initial setup proc (#1692) * Initial Test * Initial functional version. * Add Bot Replies (#1701) * Update label-commenter-config.yml * Update reply-bot.yml * Update label-commenter-config.yml * disable remove-labels because they no longer work * delete img_convert.h as included in code\components\tflite-micro-esp-… (#1695) * delete img_convert.h as included in code\components\tflite-micro-esp-examples\components\esp32-camera\conversions\include\img_converters.h * macro definition #ifdef ENABLE_SOFTAP * macro definition #ifdef ENABLE_SOFTAP (#1698) * macro definition #ifdef ENABLE_SOFTAP * Update platformio.ini * softap define in define.h * Update platformio.ini * #define WLAN_CONFIG_FILE "/sdcard/wlan.ini" Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Deinit components before reboot (#1704) * Deinit all components before reboot * Update * Update * fetch index.html after reboot -> less 404 (#1705) * Safe optimizations (#1706) * safe optimizations * Merge branch 'rolling' of https://github.com/nliaudat/AI-on-the-edge-device into rolling * Enable SoftAP * Update defines * add a define to configure the logfile handling (#1709) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Move Logfile Switch to define.h * Update Reboot Algo * Update server_ota.cpp * Avoid loading of status infos twice (#1711) * Force a reboot even reboot task cannot be created due to lack of heap (#1713) * Deinit all components before reboot * Update * Update * Force reboot when reboot task cannot be created * Improve log message when web UI is incomplete (#1716) * improve warning if version.txt is missing * typo * show round duration in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix static IP in UP, improve explanation for HA (#1719) * fix static IP in UP, improve explanation for HA * Update edit_config_param.html Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create demo folder at startup (if not present) * Update defines.h (#1726) * improve explanations,added example (#1729) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Add demo mode (#1720) * move main part to cam file * added demo mode * . * add a define to configure the logfile handling (#1709) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Move Logfile Switch to define.h * Update Reboot Algo * Update server_ota.cpp * Avoid loading of status infos twice (#1711) * Force a reboot even reboot task cannot be created due to lack of heap (#1713) * Deinit all components before reboot * Update * Update * Force reboot when reboot task cannot be created * Improve log message when web UI is incomplete (#1716) * improve warning if version.txt is missing * typo * show round duration in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * . * . * . * creade demo dir * fix static IP in UP, improve explanation for HA (#1719) * fix static IP in UP, improve explanation for HA * Update edit_config_param.html Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create demo folder at startup (if not present) * move demo files * Update defines.h (#1726) * updated description * moved to expert section * fixed broken enabled state Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> * Fix regression of reboot handler / reboot waiting script (#1725) * Reboot after OTA: Avoid exeception * Overview - optimize reload behaviour after reboot * Update * Update * Moved softAP to the very first checks * Update SoftAP * Update build.yaml (#1737) * Update build.yaml * Update build.yaml * #1649 unnecessary np check (#1736) * consolidate test-ip definition, added missing Access-Control-Allow-Origin, * Revert "consolidate test-ip definition, added missing Access-Control-Allow-Origin," This reverts commit `56cfeb732e`. * consolidate test-ip definition, added missing Access-Control-Allow-Origin (#1741) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Replace alert boxes with overlay info boxes (#1742) * consolidate test-ip definition, added missing Access-Control-Allow-Origin * replace alert boxes with overlay info boxes * . * . * . * . * . * . * . * . * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * compiler optimization (#1749) compiler optimization for tflite-micro-esp-examples * Modify stack sizes + max open files (SD) , add REST handler for heap/(stack) infos (#1751) * Modify stack sizes+max open files,add rest handler * Update * Optimized CImageBasis * Update feature.yaml * cache static files (#1755) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Implemented Reboot for "firmware.bin" as well * new OTA page with progressbar (#1756) * new OTA page with progress bar * improve error message on missing demo files * . * Implemented Reboot for "firmware.bin" as well * Update feature.yaml * cache static files (#1755) Co-authored-by: CaCO3 <caco@ruinelli.ch> * . * . * added filename validation * . * . * . * move * added missing dash to regex * restrict file type * . * . * . * . * cleanup no longer needed mode * only start restart counter if restart is required Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Rolling-bot: Only show jomjol repo rollings (#1783) * Update platfromio.ini * Add option to disable brownout detector (#1784) * Update defines.h * Update main.cpp * Improve file server (#1785) * . * . * . * . * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Ignore cache on GIT hash change (new commit or release) (#1787) * Add hash to all html, css, and js URLs * Update build.yaml * Update build.yaml * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix overview.html * GPIO handler: Deinit before delete (#1795) * Rest handler: Use none chunked transfer (#1797) * Resthandler info,sysinfo,starttime: no chunk trans * flowstart,statusflow,cputemp,rssi,uptime,prevalue * Renamed error messages * STBI_ONLY_JPEG (#1789) * Add error handling for memory intensive tasks (#1798) * tflite model loading: error handling * FlowAlignment: error handling * CImageBasis+GetJPGStream : error handling * Update graph.html (#1802) * Delete demo-images directory Data is now provided in the documentation * REST handler sysinfo + MQTT topic: Free heap memory not reporting (#1815) * REST handler sysinfo: Fix reporting of free memory * MQTT topic freemem: Fix reporting of free memory * Refactor getEspHeapInfo routine (#1816) * Refactor getEspHeapInfo * ClassLogfile: Remove redundandent one * DataGraph: datafiles sorted -> newest on top (#1817) * plaformio [env:esp32cam-dev] : Add task analysis & test for 8m spiram real support (#1818) add support of TASK_ANALYSIS_ON test full support of 8mb spiram board (https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/himem.html) * Improve html roi disablement (#1825) * Improve ROI-Problem * Update * Update common.js * Update links * Store preprocessed image with ROI to RAM (#1809) * tflite model loading: error handling * FlowAlignment: error handling * CImageBasis+GetJPGStream : error handling * store preprocessed ALG_ROI.jpg to memory * Update * Create clean-branch-cache-after-pull-request-got-closed.yml * Clean sdkconfig (not default) (#1828) * Delete sdkconfig - Kopie.defaults * Delete sdkconfig.esp32cam-testing * Delete sdkconfig - Kopie.esp32cam * Update platformio.ini * Delete clean-branch-cache-after-pull-request-got-closed.yml * Update README.md * Esp32 sys info (#1829) * Add files via upload * Update defines.h * Update main.cpp * git ignore + sdkconfig.esp32cam-dev (#1830) * update build actions/cache@v3.2.3 (#1831) * actions/cache@v3.2.3 * Create clear _all_cache.yml * fix typo naming workflow clear_cache.yml * Update tflite * Initial Implementation (#1834) * Fix pointer call in ClassControllCamera.cpp:310 (#1833) ClassControllCamera.cpp:310:67: error: request for member 'rgb_image' in '_zwImage', which is of pointer type 'CImageBasis' ClassControllCamera.cpp:310:117: error: request for member 'width' in '_zwImage', which is of pointer type 'CImageBasis' ClassControllCamera.cpp:310:157: error: request for member 'height' in '_zwImage', which is of pointer type 'CImageBasis' Initial Implementation (#1835) * improve caching (#1836) * improve caching See https://github.com/actions/cache/blob/main/tips-and-workarounds.md#update-a-cache * Update build.yaml * Update build.yaml * Update build.yaml * Update README.md * Update build.yaml * Update build.yaml * Update README.md * Update build.yaml * Update label-commenter-config.yml * Fix uninitialized filename (#1838) * fix the uninitialized filename. It only got used for the logging in case the file exists but failed to get loaded (eg. /sdcard/log/data/data_2023-01-14.csv) * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show ways to get notified about new releases * update wiki references * enhance development environment (#1841) * add sdkconfig.defaults per environment https://github.com/platformio/platform-espressif32/issues/638 * add env to platformio * add sdkconfig.<pioenv>.defaults * Update platformio.ini * Update .gitignore * Delete sdkconfig.esp32cam-cpu-freq-240.defaults * Delete sdkconfig.esp32cam-dev-himem.defaults * Delete sdkconfig.esp32cam-dev.defaults * Delete sdkconfig.esp32cam-no-softap.defaults * Add files via upload * Update sdkconfig.esp32cam-cpu-freq-240.defaults * Update platformio.ini * Update platformio.ini * Update CMakeLists.txt * Update sdkconfig.esp32cam-dev.defaults * Update platformio.ini * add HIMEM debugging tools (check free size, and memory test) (#1852) * Update defines.h * Update esp_sys.h * Update esp_sys.cpp * Add files via upload * Update perfmon.c * Update main.cpp * Update main.cpp * Delete himem_memory_check.c * Add files via upload * Update defines.h * Update himem_memory_check.cpp * Update main.cpp * Update himem_memory_check.cpp * Update himem_memory_check.h * Update main.cpp * fix define * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show alternative images for states "Initialization" and "Take Image" (#1858) * Show image for flow not started + take image * Update * Adding new images * . * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * . * New state "initialization (delayed)", renaming * Overview: Renamed "Status" + switched position * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco3@ruinelli.ch> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> * restructure manual setup zip (#1897) * Update build.yaml * Update build.yaml * Update build.yaml * fix typos and wording on config page (#1898) * Update label-commenter-config.yml * Update label-commenter-config.yml * remove external Web UI dependencies (#1896) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Remove excessive whitespaces and newlines in json (#1904) * . * . * . * . * . * remove newlines in json as it is not needed * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * REST handler CPU temp / RSSI: Remove units (#1908) * REST CPU temp: escape special character * REST CPUTemp+RSSI: remove units, output as int * REST handler sysinfo: CPU tempature as integer * Update Changelog.md (#1893) * Update Changelog.md * Update Changelog.md * Update Changelog.md * Update Changelog.md * Update Index & Index.html * Move Update description to online docu * Update index.html * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Changelog.md --------- Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: Dave <43378003+dkneisz@users.noreply.github.com> * Update Changelog.md for release * Update Changelog.md --------- Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: Dave <43378003+dkneisz@users.noreply.github.com> * Update index.html * Update index.html * Update WebInstaller * CleanUp config directory (#1928) * Update label-commenter-config.yml * Rc14.0.0 test influxdb (#1938) * Implement LogFile * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Revert "Update interface_influxdb.cpp" This reverts commit `2fe5e073e8`. * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp --------- Co-authored-by: CaCO3 <caco3@ruinelli.ch> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: Dave <43378003+dkneisz@users.noreply.github.com>	2023-01-29 16:29:29 +01:00
jomjol	f8807ca4bc	Rc14.0.0 test influxdb (#1938 ) * Implement LogFile * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Revert "Update interface_influxdb.cpp" This reverts commit `2fe5e073e8`. * Update interface_influxdb.cpp * Update interface_influxdb.cpp * Update interface_influxdb.cpp	2023-01-29 16:22:28 +01:00
CaCO3	245302c6ca	Release Preparations (#1925 ) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md * Update Changelog.md * Rearange task to CPU (http, camera, mqtt) (#1557) * Streamlined MQTT interlock when not activated & interlock MQTT when WIFI is not connected (#1556) * streamlined mqtt interlock when disabled * Disconnect mqtt client before reboot * Interlock MQTT with WIFI * Update * loglevel to DEBUG * Update * mqtt msg id incremental * new ENABLE_MQTT includes * Loglevel to DEBUG * Loglevel * Update interface_mqtt.cpp * show uptime on overview page, moved labels from firmware to Web UI (#1543) * show uptime on overview page, moved labels from firmware to Web UI * show uptime on info page * also use formated time in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * Continue boot on bad PSRAM (#1558) * add sensor status, show special index/setup page in case of a critical error * continue booting on PSRAM error * Update main.cpp added log messages * init PSRAM and add more log messages * cleanup of init checks * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * add sensor status, show special index/setup page in case of a critical error (#1560) * add sensor status, show special index/setup page in case of a critical error * Added Reboot * . * added more buttons Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Webinstaller to v13.0.7 * remove html-from-11.3.1 in release (#1565) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota Co-authored-by: github-actions <github-actions@github.com> * make the sidebar on the overviw page wider and show the round counter (#1570) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create reply-bot.yml * Update ClassFlowPostProcessing.cpp * Add bot (#1581) * Update reply-bot.yml * Create label-commenter-config.yml * added missing html change * extended instructions (#1583) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix Rate Problem * removed redundant "Status:" * Bugfix Double Extract ZIP-Files * Update FeatureRequest.md (#1591) in case of position change between the measurments set this state to true, if there is no change set it back to false. In a defined time window this movement can lead into an alarm state / water leak.. haveing this state in the mqtt broker can trigger functions like closing the ater pipe walve and so on... * Update manifest.json * Delete .gitignore * Delete .gitmodules * Delete firmware.bin * Add files via upload * Block REST API calls till resource is ready (#1609) * Block REST API call till ressource is ready * Update * Update * Update * replace relative include of gethost.js with absolute one. This is needed as that file gets incuded on dynamically generated content which can be on different path levels (#1610) Co-authored-by: CaCO3 <caco@ruinelli.ch> * esp_spiram.h has been replaced by esp32/spiram.h (#1605) * esp_spiram.h has been replaced by esp32/spiram.h * Preparations for next Bugfix Release (#1615) * Merge branch 'rolling' (#1559) * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * fix frozen time in datafile on error (#1534) Co-authored-by: CaCO3 <caco@ruinelli.ch> * log NTP server name (#1497) * log NTP server name * . * . * replace calls to /wasserzaehler.html with calls to /value (#1469) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Fix cookie usage, use correct http response codes, add 404 page (#1495) * replaced some HTTP response code with better matching codes * add custom 404 page, add log entry for debugging * fix cookie * replace non-necessary whitespace * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Don't autofail if NTP server can't be reached during initalization (#1498) This fixes an issue with a restricted network without internet access, where the hardcoded ntp server can't be reached and thus the esp resets, as it's not able to finish initalization. * Update Changelog.md * Update Changelog.md for release * Fix for securing wlan.ini (#1509) * Fix for securing wlan.ini * Fixing error with ' instead of " * Changing to errorcode 403 * maybe strcmp instead of regular == Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> * Update Web-Installer * solves #1530 (#1531) * Refactor JSON (#1518) * use correct log level * corrected logging * typo * refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre" * Wrapped 'rate' into double quotes, like all other JSON values Co-authored-by: CaCO3 <caco@ruinelli.ch> * Various corrections (#1519) * use correct log level * corrected logging * typo * add release to webinstaller * changed logs, added INFO log of raw, value, error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Prevent auto restart on cam framebuffer init error (#1522) * use correct log level * revert autorestart on camera framebuffer init error * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * #1524 - ensure the recognized digit is less than 10 (#1525) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 Co-authored-by: github-actions <github-actions@github.com> * only use sntp_getservername() after init sntp * set default NTP server on dnew installations Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> * Renamed variables and added debug log (#1537) * add debug logs * renamed variables * renamed TAGs, added flow status logging * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * replaced printf usage in LogFile.WriteToFile() * ENABLE_MQTT c++ macro definition (#1546) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition (#1547) * macro * 2 * 2 * delete jomjol_mqtt from CMakeLists * mqtt macro * final * ENABLE_INFLUXDB c++ macro definition * Update Changelog.md Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * Update Changelog.md for release Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> * new model version (#1619) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md (#1630) * Correct RenameNumber * Update Changelog.md * Fix reloading of data file (#1635) * Update data.html * fixed * show link to graph Co-authored-by: CaCO3 <caco@ruinelli.ch> * Centralizing the defines (#1624) * defines changes * Finish #define move + #define STBI_ONLY_JPEGsave 2% of Flash * remove the defines on the old places * ClassFlowCNNGeneral in define.h * revert to origin * fix translation not ready * Update defines.h * Update WebInstaller * Code translation (#1626) * comment translation * translation part #2 * code translation from DE to ENG #part3 * translation #4 * dismantled =>splitted * bereich => range * Update defines.h Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update manifest.json * Add files via upload * #ifndef in .h + #pragma once (#1639) Update defines.h (#1640) comment #define STBI_ONLY_JPEG as you do no want it in rolling but in rolling-minimize-firmware-size delete old reference to DE ''' #define AnalogFehler 3 #define AnalogToDigtalFehler 0.8 #define DigitalUnschaerfe 0.2 #define DigitalBand 3 #define DigitalAnalogerVorgaengerUebergangsbereich 2 #define DigitalUebergangsbereichVorgaenger 0.7 // 9.3 - 0.7 #define DigitalUebergangsbereichVorlauf 9.7 ''' * Trigger a flow start by REST API or MQTT (#1648) * Trigger flow start by Rest API * Increase handlers * Update * Update * Update * Change max handlers * Add debug message * Trigger flow start by MQTT * Update * Remove unused function * Remove handler_doflow + routines * Cleanup * MergeCheck * Optimize logfile write (#1652) * remove no longer needed OpenFileAndWait() * remove WriteToDedicatedFile * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * show release in log instead of branch (#1660) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Update sdkconfig.defaults (#1661) Reverting changes of `sdkconfig.defaults` falsly added within https://github.com/jomjol/AI-on-the-edge-device/pull/1626 * Init GPIO handler before MQTT init (#1663) * Update HTML & Firmware (#1671) * Remove unnecessary null pointer checks #1649 (#1673) * fix kernel panic (vector out of range) in getReadoutRawString * fix key of caches * fix key of caches * fix key caches * fix cache keys * fix cache keys * move set variables to top * debug * fix key * testing * try fix changelog * test * Update Changelog.md for release * Revert "Update Changelog.md for release" This reverts commit `4f51ec7962`. * remove testing * fix release creation * testing * Update Changelog.md for release * test * Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device" This reverts commit `f68695a4c0`, reversing changes made to `a096cf7182`. * Revert "test" This reverts commit `a096cf7182`. * revert testing * #1524 - ensure the result of ZeigerEvalHybridNeu is <10 * Fix late digit transition #1503 * only initial_esp32_setup and update.zip as artefacts * remove unneeded cache * rename step ota-v2 to ota * rename ota-v2 to ota * new models - ana-class100 v1.5.4 - ana-cont-11.0.4 - dig-class100 v1.5.0 * Remove unnecessary null pointer checks #1649 Co-authored-by: github-actions <github-actions@github.com> * Improve NTP handling (#1676) * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) * re-implemented SNTP usage, added way to disable NTP client, added timezone table * minor fixes Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix special case where number is named "default" (keep all topics in top level instead of in a sub-group) (#1664) Co-authored-by: CaCO3 <caco@ruinelli.ch> * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * make more robust, add log (#1690) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Extend Github Actions (#1680) * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * automate manifest update * Update build.yaml * revert changes to docs folder * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Update build.yaml * Add files via upload * prepare docs for deployment through actions (#1688) Co-authored-by: CaCO3 <caco@ruinelli.ch> * automate manifest update # Conflicts: # docs/binary/firmware.bin # docs/binary/v12.0.1/firmware.bin # docs/binary/v12.0.5/firmware.bin # docs/binary/v13.0.5/firmware.bin # docs/binary/v13.0.7/firmware.bin * revert changes to docs folder * revert changes to docs folder # Conflicts: # docs/releases/download/firmware.bin * Update build.yaml Co-authored-by: CaCO3 <caco@ruinelli.ch> * Improve initial setup proc (#1692) * Initial Test * Initial functional version. * Add Bot Replies (#1701) * Update label-commenter-config.yml * Update reply-bot.yml * Update label-commenter-config.yml * disable remove-labels because they no longer work * delete img_convert.h as included in code\components\tflite-micro-esp-… (#1695) * delete img_convert.h as included in code\components\tflite-micro-esp-examples\components\esp32-camera\conversions\include\img_converters.h * macro definition #ifdef ENABLE_SOFTAP * macro definition #ifdef ENABLE_SOFTAP (#1698) * macro definition #ifdef ENABLE_SOFTAP * Update platformio.ini * softap define in define.h * Update platformio.ini * #define WLAN_CONFIG_FILE "/sdcard/wlan.ini" Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Deinit components before reboot (#1704) * Deinit all components before reboot * Update * Update * fetch index.html after reboot -> less 404 (#1705) * Safe optimizations (#1706) * safe optimizations * Merge branch 'rolling' of https://github.com/nliaudat/AI-on-the-edge-device into rolling * Enable SoftAP * Update defines * add a define to configure the logfile handling (#1709) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Move Logfile Switch to define.h * Update Reboot Algo * Update server_ota.cpp * Avoid loading of status infos twice (#1711) * Force a reboot even reboot task cannot be created due to lack of heap (#1713) * Deinit all components before reboot * Update * Update * Force reboot when reboot task cannot be created * Improve log message when web UI is incomplete (#1716) * improve warning if version.txt is missing * typo * show round duration in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix static IP in UP, improve explanation for HA (#1719) * fix static IP in UP, improve explanation for HA * Update edit_config_param.html Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create demo folder at startup (if not present) * Update defines.h (#1726) * improve explanations,added example (#1729) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Add demo mode (#1720) * move main part to cam file * added demo mode * . * add a define to configure the logfile handling (#1709) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Move Logfile Switch to define.h * Update Reboot Algo * Update server_ota.cpp * Avoid loading of status infos twice (#1711) * Force a reboot even reboot task cannot be created due to lack of heap (#1713) * Deinit all components before reboot * Update * Update * Force reboot when reboot task cannot be created * Improve log message when web UI is incomplete (#1716) * improve warning if version.txt is missing * typo * show round duration in log Co-authored-by: CaCO3 <caco@ruinelli.ch> * . * . * . * creade demo dir * fix static IP in UP, improve explanation for HA (#1719) * fix static IP in UP, improve explanation for HA * Update edit_config_param.html Co-authored-by: CaCO3 <caco@ruinelli.ch> * Create demo folder at startup (if not present) * move demo files * Update defines.h (#1726) * updated description * moved to expert section * fixed broken enabled state Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> * Fix regression of reboot handler / reboot waiting script (#1725) * Reboot after OTA: Avoid exeception * Overview - optimize reload behaviour after reboot * Update * Update * Moved softAP to the very first checks * Update SoftAP * Update build.yaml (#1737) * Update build.yaml * Update build.yaml * #1649 unnecessary np check (#1736) * consolidate test-ip definition, added missing Access-Control-Allow-Origin, * Revert "consolidate test-ip definition, added missing Access-Control-Allow-Origin," This reverts commit `56cfeb732e`. * consolidate test-ip definition, added missing Access-Control-Allow-Origin (#1741) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Replace alert boxes with overlay info boxes (#1742) * consolidate test-ip definition, added missing Access-Control-Allow-Origin * replace alert boxes with overlay info boxes * . * . * . * . * . * . * . * . * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * compiler optimization (#1749) compiler optimization for tflite-micro-esp-examples * Modify stack sizes + max open files (SD) , add REST handler for heap/(stack) infos (#1751) * Modify stack sizes+max open files,add rest handler * Update * Optimized CImageBasis * Update feature.yaml * cache static files (#1755) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Implemented Reboot for "firmware.bin" as well * new OTA page with progressbar (#1756) * new OTA page with progress bar * improve error message on missing demo files * . * Implemented Reboot for "firmware.bin" as well * Update feature.yaml * cache static files (#1755) Co-authored-by: CaCO3 <caco@ruinelli.ch> * . * . * added filename validation * . * . * . * move * added missing dash to regex * restrict file type * . * . * . * . * cleanup no longer needed mode * only start restart counter if restart is required Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Rolling-bot: Only show jomjol repo rollings (#1783) * Update platfromio.ini * Add option to disable brownout detector (#1784) * Update defines.h * Update main.cpp * Improve file server (#1785) * . * . * . * . * . * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Ignore cache on GIT hash change (new commit or release) (#1787) * Add hash to all html, css, and js URLs * Update build.yaml * Update build.yaml * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * fix overview.html * GPIO handler: Deinit before delete (#1795) * Rest handler: Use none chunked transfer (#1797) * Resthandler info,sysinfo,starttime: no chunk trans * flowstart,statusflow,cputemp,rssi,uptime,prevalue * Renamed error messages * STBI_ONLY_JPEG (#1789) * Add error handling for memory intensive tasks (#1798) * tflite model loading: error handling * FlowAlignment: error handling * CImageBasis+GetJPGStream : error handling * Update graph.html (#1802) * Delete demo-images directory Data is now provided in the documentation * REST handler sysinfo + MQTT topic: Free heap memory not reporting (#1815) * REST handler sysinfo: Fix reporting of free memory * MQTT topic freemem: Fix reporting of free memory * Refactor getEspHeapInfo routine (#1816) * Refactor getEspHeapInfo * ClassLogfile: Remove redundandent one * DataGraph: datafiles sorted -> newest on top (#1817) * plaformio [env:esp32cam-dev] : Add task analysis & test for 8m spiram real support (#1818) add support of TASK_ANALYSIS_ON test full support of 8mb spiram board (https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/himem.html) * Improve html roi disablement (#1825) * Improve ROI-Problem * Update * Update common.js * Update links * Store preprocessed image with ROI to RAM (#1809) * tflite model loading: error handling * FlowAlignment: error handling * CImageBasis+GetJPGStream : error handling * store preprocessed ALG_ROI.jpg to memory * Update * Create clean-branch-cache-after-pull-request-got-closed.yml * Clean sdkconfig (not default) (#1828) * Delete sdkconfig - Kopie.defaults * Delete sdkconfig.esp32cam-testing * Delete sdkconfig - Kopie.esp32cam * Update platformio.ini * Delete clean-branch-cache-after-pull-request-got-closed.yml * Update README.md * Esp32 sys info (#1829) * Add files via upload * Update defines.h * Update main.cpp * git ignore + sdkconfig.esp32cam-dev (#1830) * update build actions/cache@v3.2.3 (#1831) * actions/cache@v3.2.3 * Create clear _all_cache.yml * fix typo naming workflow clear_cache.yml * Update tflite * Initial Implementation (#1834) * Fix pointer call in ClassControllCamera.cpp:310 (#1833) ClassControllCamera.cpp:310:67: error: request for member 'rgb_image' in '_zwImage', which is of pointer type 'CImageBasis' ClassControllCamera.cpp:310:117: error: request for member 'width' in '_zwImage', which is of pointer type 'CImageBasis' ClassControllCamera.cpp:310:157: error: request for member 'height' in '_zwImage', which is of pointer type 'CImageBasis' Initial Implementation (#1835) * improve caching (#1836) * improve caching See https://github.com/actions/cache/blob/main/tips-and-workarounds.md#update-a-cache * Update build.yaml * Update build.yaml * Update build.yaml * Update README.md * Update build.yaml * Update build.yaml * Update README.md * Update build.yaml * Update label-commenter-config.yml * Fix uninitialized filename (#1838) * fix the uninitialized filename. It only got used for the logging in case the file exists but failed to get loaded (eg. /sdcard/log/data/data_2023-01-14.csv) * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show ways to get notified about new releases * update wiki references * enhance development environment (#1841) * add sdkconfig.defaults per environment https://github.com/platformio/platform-espressif32/issues/638 * add env to platformio * add sdkconfig.<pioenv>.defaults * Update platformio.ini * Update .gitignore * Delete sdkconfig.esp32cam-cpu-freq-240.defaults * Delete sdkconfig.esp32cam-dev-himem.defaults * Delete sdkconfig.esp32cam-dev.defaults * Delete sdkconfig.esp32cam-no-softap.defaults * Add files via upload * Update sdkconfig.esp32cam-cpu-freq-240.defaults * Update platformio.ini * Update platformio.ini * Update CMakeLists.txt * Update sdkconfig.esp32cam-dev.defaults * Update platformio.ini * add HIMEM debugging tools (check free size, and memory test) (#1852) * Update defines.h * Update esp_sys.h * Update esp_sys.cpp * Add files via upload * Update perfmon.c * Update main.cpp * Update main.cpp * Delete himem_memory_check.c * Add files via upload * Update defines.h * Update himem_memory_check.cpp * Update main.cpp * Update himem_memory_check.cpp * Update himem_memory_check.h * Update main.cpp * fix define * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show alternative images for states "Initialization" and "Take Image" (#1858) * Show image for flow not started + take image * Update * Adding new images * . * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * . * New state "initialization (delayed)", renaming * Overview: Renamed "Status" + switched position * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco3@ruinelli.ch> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com> * restructure manual setup zip (#1897) * Update build.yaml * Update build.yaml * Update build.yaml * fix typos and wording on config page (#1898) * Update label-commenter-config.yml * Update label-commenter-config.yml * remove external Web UI dependencies (#1896) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Remove excessive whitespaces and newlines in json (#1904) * . * . * . * . * . * remove newlines in json as it is not needed * . Co-authored-by: CaCO3 <caco@ruinelli.ch> * REST handler CPU temp / RSSI: Remove units (#1908) * REST CPU temp: escape special character * REST CPUTemp+RSSI: remove units, output as int * REST handler sysinfo: CPU tempature as integer * Update Changelog.md (#1893) * Update Changelog.md * Update Changelog.md * Update Changelog.md * Update Changelog.md * Update Index & Index.html * Move Update description to online docu * Update index.html * Update Changelog.md * Update Changelog.md --------- Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> * Update Changelog.md --------- Co-authored-by: parhedberg <par.hedberg@gmail.com> Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se> Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com> Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: Frank Haverland <fspapaping@googlemail.com> Co-authored-by: github-actions <github-actions@github.com> Co-authored-by: Ralf Rachinger <git@ralfrachinger.de> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com> Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: Dave <43378003+dkneisz@users.noreply.github.com>	2023-01-27 21:25:58 +01:00
Slider0007	18d44a8556	REST handler CPU temp / RSSI: Remove units (#1908 ) * REST CPU temp: escape special character * REST CPUTemp+RSSI: remove units, output as int * REST handler sysinfo: CPU tempature as integer	2023-01-26 18:43:24 +01:00
CaCO3	5dc111e7a5	Remove excessive whitespaces and newlines in json (#1904 ) * . * . * . * . * . * remove newlines in json as it is not needed * . Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-01-23 19:08:24 +01:00
Slider0007	5dc7bb949a	Show alternative images for states "Initialization" and "Take Image" (#1858 ) * Show image for flow not started + take image * Update * Adding new images * . * Avoid multiple Access-Control-Allow-Origin * (#1859) * Avoid multiple Access-Control-Allow-Origin * * Adapt loglevel to debug * Update build.yaml * . * New state "initialization (delayed)", renaming * Overview: Renamed "Status" + switched position * Improve data logging on errors (#1839) * use error level for log if "Rate to High" or "Negative Rate" * remove redundant data logging * . * . * update time also in case of an error * move calculation of difference to the top as discussed in PR 1839 Co-authored-by: CaCO3 <caco@ruinelli.ch> * Heap tracing (#1861) * Update sdkconfig.esp32cam-dev-task-analysis.defaults * Update defines.h * Update platformio.ini * Update main.cpp * Update defines.h * Update ClassFlowCNNGeneral.cpp * Update platformio.ini * disable HIMEM (external > 4mb ram) not used (#1864) #force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem] #free 256kb of internal memory : #I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory. CONFIG_SPIRAM_BANKSWITCH_ENABLE=n #CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set * Update ota_page.html (#1866) Fixed the firework to match the actual button text. Fixed other random typos. * add AlignmentAlgo=off option (#1867) * Replace outdated wiki links, wording (#1871) * Revert "add AlignmentAlgo=off option (#1867)" (#1876) This reverts commit `3de4cc7c56`. * fixed typo (#1881) Co-authored-by: CaCO3 <caco@ruinelli.ch> * Show WIFI signal text labels / Log RSSI value to logfile (#1877) * Overview: WIFI RSSI strength text labels * Log RSSI value (debug level) * Typo * Update config.ini (#1880) * Update Changelog.md for release (#1892) Co-authored-by: github-actions <github-actions@github.com> * Update Changelog.md * Remove newline in version (#1891) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco@ruinelli.ch> Co-authored-by: CaCO3 <caco3@ruinelli.ch> Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com> Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com> Co-authored-by: github-actions <github-actions@github.com>	2023-01-22 12:12:56 +01:00
CaCO3	457a526792	Remove newline in version (#1891 ) * remove newline in version * . * . Co-authored-by: CaCO3 <caco@ruinelli.ch>	2023-01-21 21:54:31 +01:00

... 3 4 5 6 7 ...

937 Commits