fix_soc_sdmmc_and_add_soc_temperature_for_s3_support

code/components/jomjol_helper/Helper.cpp

@@ -33,6 +33,10 @@ extern "C"
 #include "esp_vfs_fat.h"
 #include "../sdmmc_common.h"
 
+#ifdef CONFIG_SOC_TEMP_SENSOR_SUPPORTED
+#include "driver/temperature_sensor.h"
+#endif
+
 static const char *TAG = "HELPER";
 
 using namespace std;
@@ -613,11 +617,62 @@ string toLower(string in)
 	return in;
 }
 
-// CPU Temp
-extern "C" uint8_t temprature_sens_read();
+// SOC temperature sensor
+#if defined(CONFIG_SOC_TEMP_SENSOR_SUPPORTED)
+static float socTemperature = -1;
+
+void taskSocTemp(void *pvParameter)
+{
+    temperature_sensor_handle_t socTempSensor = NULL;
+    temperature_sensor_config_t socTempSensorConfig = TEMPERATURE_SENSOR_CONFIG_DEFAULT(20, 100);
+    temperature_sensor_install(&socTempSensorConfig, &socTempSensor);
+    temperature_sensor_enable(socTempSensor);
+
+    while (1) {
+        if (temperature_sensor_get_celsius(socTempSensor, &socTemperature) != ESP_OK) {
+            socTemperature = -1;
+        }
+
+        vTaskDelay(pdMS_TO_TICKS(5000));
+    }
+}
+
+void initTemperatureSensor()
+{
+    // Create a dedicated task to ensure access temperature ressource only from a single source
+    BaseType_t xReturned = xTaskCreate(&taskSocTemp, "taskSocTemp", 2048, NULL, tskIDLE_PRIORITY + 1, NULL);
+
+    if (xReturned != pdPASS) {
+        LogFile.WriteToFile(ESP_LOG_ERROR, TAG, "Failed to create taskSocTemp");
+    }
+}
+
 float temperatureRead()
 {
-	return (temprature_sens_read() - 32) / 1.8;
+    return socTemperature;
+}
+
+#elif defined(CONFIG_IDF_TARGET_ESP32) // Inofficial support of vanilla ESP32. Value might be unreliable
+extern "C" uint8_t temprature_sens_read();
+
+float temperatureRead()
+{
+    return (temprature_sens_read() - 32) / 1.8;
+}
+
+#else
+#warning "SOC temperature sensor not supported"
+float temperatureRead()
+{
+    return -1.0;
+}
+#endif
+
+std::string intToHexString(int _valueInt)
+{
+    char valueHex[33];
+    sprintf(valueHex, "0x%02x", _valueInt);
+    return std::string(valueHex);
 }
 
 time_t addDays(time_t startTime, int days)

code/components/jomjol_helper/Helper.h

@@ -38,8 +38,13 @@ int removeFolder(const char* folderPath, const char* logTag);
 string toLower(string in);
 string toUpper(string in);
 
+#ifdef CONFIG_SOC_TEMP_SENSOR_SUPPORTED
+void initTemperatureSensor();
+#endif
+
 float temperatureRead();
 
+std::string intToHexString(int _valueInt);
 time_t addDays(time_t startTime, int days);
 
 void memCopyGen(uint8_t* _source, uint8_t* _target, int _size);

code/main/main.cpp

@@ -79,10 +79,10 @@
     static heap_trace_record_t trace_record[NUM_RECORDS]; // This buffer must be in internal RAM
 #endif
 
-extern const char* GIT_TAG;
-extern const char* GIT_REV;
-extern const char* GIT_BRANCH;
-extern const char* BUILD_TIME;
+extern const char *GIT_TAG;
+extern const char *GIT_REV;
+extern const char *GIT_BRANCH;
+extern const char *BUILD_TIME;
 
 extern std::string getFwVersion(void);
 extern std::string getHTMLversion(void);
@@ -109,27 +109,51 @@ bool Init_NVS_SDCard()
     sdmmc_host_t host = SDMMC_HOST_DEFAULT();
     host.max_freq_khz = SDMMC_FREQ_HIGHSPEED;
 
+    // For SoCs where the SD power can be supplied both via an internal or external (e.g. on-board LDO) power supply.
+    // When using specific IO pins (which can be used for ultra high-speed SDMMC) to connect to the SD card
+    // and the internal LDO power supply, we need to initialize the power supply first.
+#if SD_PWR_CTRL_LDO_INTERNAL_IO
+    sd_pwr_ctrl_ldo_config_t ldo_config = {
+        .ldo_chan_id = CONFIG_EXAMPLE_SD_PWR_CTRL_LDO_IO_ID,
+    };
+    sd_pwr_ctrl_handle_t pwr_ctrl_handle = NULL;
+
+    ret = sd_pwr_ctrl_new_on_chip_ldo(&ldo_config, &pwr_ctrl_handle);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to create a new on-chip LDO power control driver");
+        return ret;
+    }
+    host.pwr_ctrl_handle = pwr_ctrl_handle;
+#endif
+
     // This initializes the slot without card detect (CD) and write protect (WP) signals.
     // Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
+#ifdef CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
+    sdmmc_slot_config_t slot_config = {
+        .cd = SDMMC_SLOT_NO_CD,
+        .wp = SDMMC_SLOT_NO_WP,
+    };
+#else
     sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
+#endif
 
     // Set bus width to use:
 #ifdef __SD_USE_ONE_LINE_MODE__
     slot_config.width = 1;
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
+#ifdef CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
     slot_config.clk = GPIO_SDCARD_CLK;
     slot_config.cmd = GPIO_SDCARD_CMD;
     slot_config.d0 = GPIO_SDCARD_D0;
-#endif
-
-#else
+#endif // end CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
+#else  // else __SD_USE_ONE_LINE_MODE__
     slot_config.width = 4;
-#ifdef SOC_SDMMC_USE_GPIO_MATRIX
+#ifdef CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
     slot_config.d1 = GPIO_SDCARD_D1;
     slot_config.d2 = GPIO_SDCARD_D2;
     slot_config.d3 = GPIO_SDCARD_D3;
-#endif
-#endif
+#endif // end CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
+#endif // end __SD_USE_ONE_LINE_MODE__
 
     // Enable internal pullups on enabled pins. The internal pullups
     // are insufficient however, please make sure 10k external pullups are
@@ -350,6 +374,12 @@ extern "C" void app_main(void)
     // ********************************************
     setupTime();    // NTP time service: Status of time synchronization will be checked after every round (server_tflite.cpp)
 
+    // Init SOC temperature sensor (if supported by hardware)
+    // ********************************************
+#if defined(CONFIG_SOC_TEMP_SENSOR_SUPPORTED)
+    initTemperatureSensor();
+#endif
+
     // Set CPU Frequency
     // ********************************************
     setCpuFrequency();