5.5 KiB
Hardware Compatibility
General Remark
Altrough a board looks similair, it can have major differences, eg.:
- Processor
- Ram (Size! & Type) -> this Project needs at least 4MB RAM!
- Flashrom
- Camera Modules
- Onboard/External Antenna
- Quality of Components
- Manufacture Quality of the PCB and soldering
- Different Components
- "Clone" Components -> ESPxx
- etc.
This can cause different Power Consumption, Power Requirements, compatibility issues, etc.
Most manufacturers and sellers buy what's cheap today on the Asian markets. In the end, it looks like it is sometimes a trial and error approach which ESP32-CAM Module works reliable.
Below you find some remarks and experiences from the community:
ESP32 core itself
| Chip Version | Image | Status |
|---|---|---|
| ESP32-D0WDQ6 (revision 1) | okay |
PSRAM
| Labeling on PSRAM module | Image | Status |
|---|---|---|
| IPUS IPS640LS0 1815XBGN |
okay | |
| AP MEMORY 6404L-3SOR 1040H 110089G |
okay | |
| AP MEMORY 6404L-3SQR 12205 150047G |
okay 8MB |
|
| AP MEMORY 6404L-350R 1120A 130027G |
NOT OK PSRAM not accessible |
|
| AP MEMORY 6404L-35QR 11208 130025G |
NOT OK PSRAM not accessible |
|
| AP MEMORY 6404L-3SQR 13100 180026G |
NOT OK PSRAM not accessible |
|
| AP MEMORY 6404L-3SQR 11207 130024G |
NOT OK PSRAM not accessible |
|
| AP MEMORY 1604M-3SQR 0280A 070036G |
NOT OK 2MB only! |
|
| ESP PSRAM64H 462021 1B00286 |
okay | |
| ESP PSRAM16M 302020 |
NOT OK 2MB only! |
|
| ESP PSRAM16H 202020 050022G |
NOT OK 2MB only! |
OV2640 - Camera
The experience with the camera only is based on single modules. It is well possible, that this module had a damage overall and other modules of the same type will work. Give it a try and report to me!
| Labeling on Flex-Connector | Image | Status |
|---|---|---|
| TY-OV2 640-V2.0 |
okay | |
| DCX-OV2 640-V2 |
okay | |
| DC-26 40-V3 |
okay: 3x NOT OKAY: 1x |
ESP32 Modules
| Module | Image | Status |
|---|---|---|
| ESP32CAM Different versions on the market! Especially the PSRAM is sometimes labeled wrong (Label: 4MB, Real: only 2 MB --> will not work!) |
okay with >=4 MB PSRAM! |
|
| ESP32-S3-EYE No Flash LED, pins different used (e.g. LCD diskplay) |
NOT OKAY |
SD-Cards
Due to the limited free available gpios (due to all the extensions needed like: camera, sd-card, LED-flash, ...) the sd card is connected in 1-wire mode. There are some cards, that are compatible with the esp32cam module for unknown reasons. It is observed, that smaller cards (up to 4 GB) tend to be more stable and larger cards have more problems. But quite some exceptions in the forums (4 GB cards not working, 16 G cards working like a charm).
Devices known to work
Modules (Old list, not up-to-date anymore):
See https://github.com/jomjol/AI-on-the-edge-device/discussions/1732 for a more recent list.
-
https://arduino-projekte.info/produkt/esp32-cam-v2-integriertem-ch340-mit-ov2640-kamera-modul/ (see https://github.com/jomjol/AI-on-the-edge-device/discussions/1041)
SD-Card
- Sandisk 2GB Micro SD Class 2 Sandisk 2GB AITRIP ESP32 and CAM ESP-32/CAM
- Amazon US - Aideepen ESP32-CAM W BT Board ESP32-CAM-MB Micro USB to Serial Port CH-340G with OV2640 2MP Camera Module Dual Mode with Amazon US - Cloudisk 5Pack 4GB Micro SD Card 4 GB MicroSD Memory Card Class6
Weak Wifi
The ESP32-CAM supports an external antenna. It requires some soldering skills but can improve the connection quality. See https://randomnerdtutorials.com/esp32-cam-connect-external-antenna/