mirror of
https://github.com/jomjol/AI-on-the-edge-device-docs.git
synced 2025-12-06 11:36:53 +03:00
81 lines
1.7 KiB
Markdown
81 lines
1.7 KiB
Markdown
# MQTT API
|
|
The device is capable to register to a MQTT broker to publish data and subscribe to specific topics.
|
|
|
|
The MQTT service has to be enabled and configured properly in the device configuration via web interface (`Settings` -> `Configuration` -> section `MQTT`)
|
|
|
|
The following parameters have to be defined:
|
|
* URI
|
|
* MainTopic (optional, if not set, the hostname is used)
|
|
* ClientID (optional, if not set, `AIOTED-` + the MAC address gets used to make sure the ID is unique)
|
|
* User (optional)
|
|
* Password (optional)
|
|
* RetainFlag (optional)
|
|
|
|
## Published topics
|
|
|
|
### Status
|
|
`MainTopic`/{status topic}, e.g. `watermeter/status`
|
|
* #### Connection
|
|
|
|
* #### Interval
|
|
|
|
* #### MAC
|
|
|
|
* #### IP
|
|
|
|
* #### Hostname
|
|
|
|
* #### Uptime
|
|
|
|
* #### FreeMem
|
|
|
|
* #### WifiRSSI
|
|
|
|
* #### CPUTemp
|
|
|
|
* #### Status
|
|
|
|
### Result
|
|
`MainTopic`/{NumberName}/{result topic}, e.g. `watermeter/main/value`
|
|
|
|
* #### Value
|
|
|
|
* #### Raw
|
|
|
|
* #### Error
|
|
|
|
* #### JSON
|
|
|
|
* #### Rate
|
|
|
|
* #### Rate_per_time_unit
|
|
The time Unit gets set with the Homeassistant Discovery, eg. `h` or `m` (minutes)
|
|
|
|
* #### Rate_per_digitalization_round
|
|
The `interval` defines when the next round gets triggered
|
|
|
|
* #### Changeabsolut
|
|
|
|
* #### Timestamp
|
|
|
|
* #### JSON
|
|
All relevant results in JSON syntax
|
|
|
|
### GPIO
|
|
`MainTopic`/{GPIO topic}, e.g. `watermeter/GPIO/GPIO12`
|
|
|
|
* #### GPIO/GPIO{PinNumber}
|
|
Depending on device configuration (`Settings` --> `Configuration` --> Chapter `GPIO`)
|
|
|
|
|
|
## Subscibed topics
|
|
`MainTopic`/{subscribed topic}, e.g. `watermeter/ctrl/flow_start`
|
|
|
|
### Control
|
|
|
|
* #### ctrl/flow_start
|
|
Trigger a flow start by publishing to this topic (any character, length > 0)
|
|
|
|
* #### GPIO/GPIO{PinNumber}
|
|
Depending on device configuration (`Settings` --> `Configuration` --> Chapter `GPIO`)
|