Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-07 03:57:00 +03:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #37 from spuder/patch-1

Browse Source 
Fix Typos
This commit is contained in:
Frank Haverland
2023-07-04 20:13:09 +02:00
committed by GitHub
parent 09326e4d53 8476849c98
commit d1143f5f86
2 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
docs/ROI-Configuration.md
View File

@@ -41,7 +41,7 @@ Make sure the ROIs are in the right order, matching the significance of a digit/
The order of the ROIs defines how the individual digits are combined to the total number. The first ROI is the digit with the highest order (left side), then the second and so on. You can control the order in the selector tab and change it with the buttons `"move Next"` or `"move Previous"`.
In most cases **digits** are ordered equidistantly (have the same distance between each other) and have the same size.
Bcause of this the Web Interface keeps their sizes and distance the same.
Because of this, the Web Interface keeps their sizes and distance the same.
If you need individual sizes or distances, untick the settings `(4)`.
In almost all cases the sizes and `y` values should be identical!

8
docs/initial-setup.md
View File

@@ -7,15 +7,15 @@ After setting up the device (firmware, SD card, WLAN) the device will connect to
With the buttons on the top you can navigate through 5 steps which guide you through the necessary setup:
1. Create the [Reference Image](Reference-Image.md). It is the base for the position referencing and the identification of the digits and counters.
1. Define two unique [Reference Marks](Alignment.md). They is used to align the individual camera images and identify the absolut positions.
1. Define two unique [Reference Marks](Alignment.md). They is used to align the individual camera images and identify the absolute positions.
1. Define [ROIs](ROI-Configuration.md) for the Digits. They will be used to digitize the digit part of your meter. If your meter has no digits, this step can be skipped.
1. Define [ROIs](ROI-Configuration.md) for the Analog Counters. (Only required in case your meter has analoge counters)</li>
1. Define [ROIs](ROI-Configuration.md) for the Analog Counters. (Only required in case your meter has analog counters)</li>
1. [General Settings](Configuration.md). Further configuration of your device.
All settings can be accessed also later in the normal operation mode.
All settings can be accessed later in the normal operation mode.
!!! Note
Don' t forget to save each step with "Save" and do not reboot at this stage.
Don't forget to save each step with "Save", and do not reboot at this stage.
## Finish the Setup and change to the Normal Operation mode
With the last step `(1)` you leave the **Setup Mode** and reboot to the **Normal Operation mode**.