Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-06 11:36:53 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update FAQs.md

Browse Source
This commit is contained in:
Slider0007
2024-04-26 14:55:50 +02:00
committed by GitHub
parent 6a461f5c24
commit 8b4832af1a
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
docs/FAQs.md
View File

@@ -11,17 +11,17 @@ There are several reasons for frequent reboots:
There is a dedicated page about this: [Frequent Reboots](../Frequent-Reboots/).
## Bad WebUI Responsiveness. What can I do?
## Bad WebUI responsiveness. What can I do?
This is usually due to hardware or WLAN issues. There are already many entries in discussion section, some of which have good tipps.
Possible checks / ideas:
* ESP32CAM hardware antenna design is very poor in connection with camera frequency.
-> Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly.
-> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding.
* Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly.
* Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding.
[Shielding Example](https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/)
* WLAN channel: Preferably use 1, 6 or 11
* WLAN channel: Preferably use channel 1, 6 or 11
* Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence
* Try with an external antenna
* Avoid VLAN, currently not fully supported