From 8b4832af1a56f72e3e930a553f05cf77db10f321 Mon Sep 17 00:00:00 2001 From: Slider0007 <115730895+Slider0007@users.noreply.github.com> Date: Fri, 26 Apr 2024 14:55:50 +0200 Subject: [PATCH] Update FAQs.md --- docs/FAQs.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/FAQs.md b/docs/FAQs.md index 2df7f77..a55017b 100644 --- a/docs/FAQs.md +++ b/docs/FAQs.md @@ -11,17 +11,17 @@ There are several reasons for frequent reboots: There is a dedicated page about this: [Frequent Reboots](../Frequent-Reboots/). -## Bad WebUI Responsiveness. What can I do? +## Bad WebUI responsiveness. What can I do? This is usually due to hardware or WLAN issues. There are already many entries in discussion section, some of which have good tipps. Possible checks / ideas: * ESP32CAM hardware antenna design is very poor in connection with camera frequency. --> Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly. --> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding. + * Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly. + * Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding. [Shielding Example](https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/) -* WLAN channel: Preferably use 1, 6 or 11 +* WLAN channel: Preferably use channel 1, 6 or 11 * Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence * Try with an external antenna * Avoid VLAN, currently not fully supported