Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-09 21:17:09 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update FAQs.md

Browse Source
This commit is contained in:
Slider0007
2024-04-26 14:55:50 +02:00
committed by GitHub
parent 6a461f5c24
commit 8b4832af1a
1 changed files with 4 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
docs/FAQs.md
View File

@@ -11,17 +11,17 @@ There are several reasons for frequent reboots:
There is a dedicated page about this: [Frequent Reboots](../Frequent-Reboots/). There is a dedicated page about this: [Frequent Reboots](../Frequent-Reboots/).
## Bad WebUI Responsiveness. What can I do? ## Bad WebUI responsiveness. What can I do?
This is usually due to hardware or WLAN issues. There are already many entries in discussion section, some of which have good tipps. This is usually due to hardware or WLAN issues. There are already many entries in discussion section, some of which have good tipps.
Possible checks / ideas: Possible checks / ideas:
* ESP32CAM hardware antenna design is very poor in connection with camera frequency. * ESP32CAM hardware antenna design is very poor in connection with camera frequency.
-> Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly. * Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly.
-> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding. * Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding.
[Shielding Example](https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/) [Shielding Example](https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/)
* WLAN channel: Preferably use 1, 6 or 11 * WLAN channel: Preferably use channel 1, 6 or 11
* Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence * Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence
* Try with an external antenna * Try with an external antenna
* Avoid VLAN, currently not fully supported * Avoid VLAN, currently not fully supported