Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-06 19:46:56 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update FAQs.md

Browse Source
This commit is contained in:
Slider0007
2024-04-20 19:02:16 +02:00
committed by GitHub
parent 687e75e349
commit 6a461f5c24
1 changed files with 11 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

21
docs/FAQs.md
View File

@@ -16,17 +16,18 @@ There is a dedicated page about this: [Frequent Reboots](../Frequent-Reboots/).
This is usually due to hardware or WLAN issues. There are already many entries in discussion section, some of which have good tipps.
Possible checks / ideas:
- ESP32CAM hardware antenna design is very poor in connection with camera frequency.
* ESP32CAM hardware antenna design is very poor in connection with camera frequency.
-> Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly.
-> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding. But I've never tried that myself...
https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/
- WLAN channel: Preferably use 1, 6 or 11
- Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence
- Use an external antenna
- Avoid VLAN, currently not fully supported
- Temporarily deactivate virus scanner / firewall on the end device for testing purpose
- Use sufficiently dimensioned power supply
- Use a branded SD card (formatted with Windows, MAC often causes problems)
-> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding.
[Shielding Example](https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/)
* WLAN channel: Preferably use 1, 6 or 11
* Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence
* Try with an external antenna
* Avoid VLAN, currently not fully supported
* Temporarily deactivate virus scanner / firewall on the end device for testing purpose
* Use sufficiently dimensioned power supply
* Use a branded SD card (formatted with Windows, MAC often causes problems)
Check [discussion section](https://github.com/jomjol/AI-on-the-edge-device/discussions) for possible further tipps.