From 6a461f5c245892235e7975b8ff2104c826e76faa Mon Sep 17 00:00:00 2001
From: Slider0007 <115730895+Slider0007@users.noreply.github.com>
Date: Sat, 20 Apr 2024 19:02:16 +0200
Subject: [PATCH] Update FAQs.md

---
 docs/FAQs.md | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/docs/FAQs.md b/docs/FAQs.md
index 79fb288..2df7f77 100644
--- a/docs/FAQs.md
+++ b/docs/FAQs.md
@@ -16,17 +16,18 @@ There is a dedicated page about this: [Frequent Reboots](../Frequent-Reboots/).
 This is usually due to hardware or WLAN issues. There are already many entries in discussion section, some of which have good tipps.
 
 Possible checks / ideas:
-- ESP32CAM hardware antenna design is very poor in connection with camera frequency.
+
+* ESP32CAM hardware antenna design is very poor in connection with camera frequency.
 -> Simple test: When the device is in operation, putting your thumb on the camera connector and the directly adjacent components should make the device respond more quickly.
--> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding. But I've never tried that myself...
-https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/
-- WLAN channel: Preferably use 1, 6 or 11
-- Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence
-- Use an external antenna
-- Avoid VLAN, currently not fully supported
-- Temporarily deactivate virus scanner / firewall on the end device for testing purpose
-- Use sufficiently dimensioned power supply
-- Use a branded SD card (formatted with Windows, MAC often causes problems)
+-> Possible optimization: Here, an attempt was made to dampen the frequency influences somewhat by shielding. 
+[Shielding Example](https://www.reddit.com/r/esp32/comments/r9g5jc/fixing_ymmv_the_poor_frame_rate_on_the_esp32cam/)
+* WLAN channel: Preferably use 1, 6 or 11
+* Performance can vary depending on the AP manufacturer. If necessary, check with a mobile hotspot or other device to exclude AP influence
+* Try with an external antenna
+* Avoid VLAN, currently not fully supported
+* Temporarily deactivate virus scanner / firewall on the end device for testing purpose
+* Use sufficiently dimensioned power supply
+* Use a branded SD card (formatted with Windows, MAC often causes problems)
 
 Check [discussion section](https://github.com/jomjol/AI-on-the-edge-device/discussions) for possible further tipps.