squeezelite-esp32/main/output_dac.c.tes

#include "squeezelite.h"
#include "driver/i2s.h"

static log_level loglevel;

static bool running = true;

extern struct outputstate output;
extern struct buffer *outputbuf;
extern struct buffer *streambuf;

#define LOCK   mutex_lock(outputbuf->mutex)
#define UNLOCK mutex_unlock(outputbuf->mutex)

#define FRAME_BLOCK MAX_SILENCE_FRAMES

extern u8_t *silencebuf;
extern u8_t *buf;

#define I2S_NUM         (0)
#define WAVE_FREQ_HZ    (100)
#define PI              (3.14159265)
#define I2S_BCK_IO      (GPIO_NUM_26)
#define I2S_WS_IO       (GPIO_NUM_25)
#define I2S_DO_IO       (GPIO_NUM_22)
#define I2S_DI_IO       (-1)
// buffer length is expressed in number of samples
#define I2S_BUF_LEN		60

static int _write_frames(frames_t out_frames, bool silence, s32_t gainL,
		s32_t gainR, s32_t cross_gain_in, s32_t cross_gain_out,
		ISAMPLE_T **cross_ptr);

void set_volume(unsigned left, unsigned right) {
	LOG_DEBUG("setting internal gain left: %u right: %u", left, right);
	LOCK;
	output.gainL = left;
	output.gainR = right;
	// TODO
	output.gainL = FIXED_ONE;
	output.gainR = FIXED_ONE;
	UNLOCK;
}

static void *output_thread(void *arg) {
	bool start = true;
	bool output_off = (output.state == OUTPUT_OFF);
	bool probe_device = (arg != NULL);
	int err;

	while (running) {
		// todo: implement output off logic?
		// todo: call i2s_set_clock here if rate is changed
		LOCK;

		output.device_frames = 0;
		output.updated = gettime_ms();
		output.frames_played_dmp = output.frames_played;

		_output_frames(I2S_BUF_LEN*2); // fill at least one DMA buffer with stereo signal

		UNLOCK;
	}

	return 0;
}

static pthread_t thread;

void output_init_dac(log_level level, char *device, unsigned output_buf_size,
		char *params, unsigned rates[], unsigned rate_delay, unsigned idle) {
	loglevel = level;

	LOG_INFO("init output DAC");

	memset(&output, 0, sizeof(output));

	output.start_frames = 0; //CONFIG_ //FRAME_BLOCK * 2;
	output.write_cb = &_write_frames;
	output.rate_delay = rate_delay;

	// ensure output rate is specified to avoid test open
	if (!rates[0]) {
		rates[0] = 44100;
	}
	device = "DAC";
	output_init_common(level, device, output_buf_size, rates, idle);

	i2s_config_t i2s_config = {
			.mode = I2S_MODE_MASTER | I2S_MODE_TX,                    // Only TX
			.sample_rate = output.current_sample_rate,
			.bits_per_sample = BYTES_PER_FRAME * 8,
			.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,           //2-channels
			.communication_format = I2S_COMM_FORMAT_I2S
					| I2S_COMM_FORMAT_I2S_MSB,
			.dma_buf_count = 6, //todo: tune this parameter. Expressed in numbrer of buffers
			.dma_buf_len = I2S_BUF_LEN, // todo: tune this parameter. Expressed in number of samples. Byte size depends on bit depth
			.use_apll = false,
			.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1 //Interrupt level 1
			};
	i2s_pin_config_t pin_config = { .bck_io_num = I2S_BCK_IO, .ws_io_num =
			I2S_WS_IO, .data_out_num = I2S_DO_IO, .data_in_num = I2S_DI_IO //Not used
			};
	i2s_driver_install(I2S_NUM, &i2s_config, 0, NULL);
	i2s_set_pin(I2S_NUM, &pin_config);
	i2s_set_clk(I2S_NUM, output.current_sample_rate, i2s_config.bits_per_sample, 2);

#if LINUX || OSX || FREEBSD || POSIX
	pthread_attr_t attr;
	pthread_attr_init(&attr);
#ifdef PTHREAD_STACK_MIN
	pthread_attr_setstacksize(&attr,
			PTHREAD_STACK_MIN + OUTPUT_THREAD_STACK_SIZE);
#endif
	pthread_create(&thread, &attr, output_thread, NULL);
	pthread_attr_destroy(&attr);
#endif
#if WIN
	thread = CreateThread(NULL, OUTPUT_THREAD_STACK_SIZE, (LPTHREAD_START_ROUTINE)&output_thread, NULL, 0, NULL);
#endif

}

void output_close_dac(void) {
	LOG_INFO("close output");
	LOCK;
	running = false;
	UNLOCK;

	output_close_common();
}

static int _write_frames(frames_t out_frames, bool silence, s32_t gainL,
		s32_t gainR, s32_t cross_gain_in, s32_t cross_gain_out,
		ISAMPLE_T **cross_ptr) {

	u8_t *obuf;
	size_t i2s_bytes_write = 0;

	if (!silence) {

		if (output.fade == FADE_ACTIVE && output.fade_dir == FADE_CROSS && *cross_ptr) {
			_apply_cross(outputbuf, out_frames, cross_gain_in, cross_gain_out, cross_ptr);
		}

		obuf = outputbuf->readp;

	} else {

		obuf = silencebuf;
	}

	//_scale_and_pack_frames(buf + buffill * bytes_per_frame, (s32_t *)(void *)obuf, out_frames, gainL, gainR, output.format);

//	buffill += out_frames;
	   i2s_write(I2S_NUM, obuf, out_frames  *BYTES_PER_FRAME, &i2s_bytes_write, 100);



	return (int)i2s_bytes_write * BYTES_PER_FRAME;

}