mirror of
https://github.com/sle118/squeezelite-esp32.git
synced 2025-12-07 20:17:04 +03:00
187 lines
4.8 KiB
C
187 lines
4.8 KiB
C
/*
|
|
* Squeezelite for esp32
|
|
*
|
|
* (c) Sebastien 2019
|
|
* Philippe G. 2019, philippe_44@outlook.com
|
|
*
|
|
* This software is released under the MIT License.
|
|
* https://opensource.org/licenses/MIT
|
|
*
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "driver/i2s.h"
|
|
#include "driver/i2c.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "adac.h"
|
|
|
|
#define TAS575x (0x98 >> 1)
|
|
#define TAS578x (0x90 >> 1)
|
|
|
|
static const char TAG[] = "TAS575x/8x";
|
|
|
|
static bool init(char *config, int i2c_port_num, i2s_config_t *i2s_config, bool *mck);
|
|
static void speaker(bool active);
|
|
static void headset(bool active);
|
|
static bool volume(unsigned left, unsigned right);
|
|
static void power(adac_power_e mode);
|
|
|
|
const struct adac_s dac_tas57xx = { "TAS57xx", init, adac_deinit, power, speaker, headset, volume };
|
|
|
|
struct tas57xx_cmd_s {
|
|
uint8_t reg;
|
|
uint8_t value;
|
|
};
|
|
|
|
static const struct tas57xx_cmd_s tas57xx_init_sequence[] = {
|
|
{ 0x00, 0x00 }, // select page 0
|
|
{ 0x02, 0x10 }, // standby
|
|
{ 0x0d, 0x10 }, // use SCK for PLL
|
|
{ 0x25, 0x08 }, // ignore SCK halt
|
|
{ 0x08, 0x10 }, // Mute control enable (from TAS5780)
|
|
{ 0x54, 0x02 }, // Mute output control (from TAS5780)
|
|
#if BYTES_PER_FRAME == 8
|
|
{ 0x28, 0x03 }, // I2S length 32 bits
|
|
#else
|
|
{ 0x28, 0x00 }, // I2S length 16 bits
|
|
#endif
|
|
{ 0x02, 0x00 }, // restart
|
|
{ 0xff, 0xff } // end of table
|
|
};
|
|
|
|
// matching orders
|
|
typedef enum { TAS57_ACTIVE = 0, TAS57_STANDBY, TAS57_DOWN, TAS57_ANALOGUE_OFF, TAS57_ANALOGUE_ON, TAS57_VOLUME } dac_cmd_e;
|
|
|
|
static const struct tas57xx_cmd_s tas57xx_cmd[] = {
|
|
{ 0x02, 0x00 }, // TAS57_ACTIVE
|
|
{ 0x02, 0x10 }, // TAS57_STANDBY
|
|
{ 0x02, 0x01 }, // TAS57_DOWN
|
|
{ 0x56, 0x10 }, // TAS57_ANALOGUE_OFF
|
|
{ 0x56, 0x00 }, // TAS57_ANALOGUE_ON
|
|
};
|
|
|
|
static uint8_t tas57_addr;
|
|
|
|
static void dac_cmd(dac_cmd_e cmd, ...);
|
|
static int tas57_detect(void);
|
|
|
|
/****************************************************************************************
|
|
* init
|
|
*/
|
|
static bool init(char *config, int i2c_port, i2s_config_t *i2s_config, bool *mck) {
|
|
// find which TAS we are using (if any)
|
|
tas57_addr = adac_init(config, i2c_port);
|
|
if (!tas57_addr) tas57_addr = tas57_detect();
|
|
|
|
if (!tas57_addr) {
|
|
ESP_LOGW(TAG, "No TAS57xx detected");
|
|
adac_deinit();
|
|
return false;
|
|
}
|
|
|
|
i2c_cmd_handle_t i2c_cmd = i2c_cmd_link_create();
|
|
|
|
for (int i = 0; tas57xx_init_sequence[i].reg != 0xff; i++) {
|
|
i2c_master_start(i2c_cmd);
|
|
i2c_master_write_byte(i2c_cmd, (tas57_addr << 1) | I2C_MASTER_WRITE, I2C_MASTER_NACK);
|
|
i2c_master_write_byte(i2c_cmd, tas57xx_init_sequence[i].reg, I2C_MASTER_NACK);
|
|
i2c_master_write_byte(i2c_cmd, tas57xx_init_sequence[i].value, I2C_MASTER_NACK);
|
|
ESP_LOGD(TAG, "i2c write %x at %u", tas57xx_init_sequence[i].reg, tas57xx_init_sequence[i].value);
|
|
}
|
|
|
|
i2c_master_stop(i2c_cmd);
|
|
esp_err_t res = i2c_master_cmd_begin(i2c_port, i2c_cmd, 500 / portTICK_RATE_MS);
|
|
i2c_cmd_link_delete(i2c_cmd);
|
|
|
|
if (res != ESP_OK) {
|
|
ESP_LOGE(TAG, "could not intialize TAS57xx %d", res);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/****************************************************************************************
|
|
* change volume
|
|
*/
|
|
static bool volume(unsigned left, unsigned right) {
|
|
return false;
|
|
}
|
|
|
|
/****************************************************************************************
|
|
* power
|
|
*/
|
|
static void power(adac_power_e mode) {
|
|
switch(mode) {
|
|
case ADAC_STANDBY:
|
|
dac_cmd(TAS57_STANDBY);
|
|
break;
|
|
case ADAC_ON:
|
|
dac_cmd(TAS57_ACTIVE);
|
|
break;
|
|
case ADAC_OFF:
|
|
dac_cmd(TAS57_DOWN);
|
|
break;
|
|
default:
|
|
ESP_LOGW(TAG, "unknown DAC command");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/****************************************************************************************
|
|
* speaker
|
|
*/
|
|
static void speaker(bool active) {
|
|
if (active) dac_cmd(TAS57_ANALOGUE_ON);
|
|
else dac_cmd(TAS57_ANALOGUE_OFF);
|
|
}
|
|
|
|
/****************************************************************************************
|
|
* headset
|
|
*/
|
|
static void headset(bool active) { }
|
|
|
|
/****************************************************************************************
|
|
* DAC specific commands
|
|
*/
|
|
void dac_cmd(dac_cmd_e cmd, ...) {
|
|
va_list args;
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
va_start(args, cmd);
|
|
|
|
switch(cmd) {
|
|
case TAS57_VOLUME:
|
|
ESP_LOGE(TAG, "DAC volume not handled yet");
|
|
break;
|
|
default:
|
|
ret = adac_write_byte(tas57_addr, tas57xx_cmd[cmd].reg, tas57xx_cmd[cmd].value);
|
|
}
|
|
|
|
if (ret != ESP_OK) {
|
|
ESP_LOGE(TAG, "could not use TAS57xx %d", ret);
|
|
}
|
|
|
|
va_end(args);
|
|
}
|
|
|
|
/****************************************************************************************
|
|
* TAS57 detection
|
|
*/
|
|
static int tas57_detect(void) {
|
|
uint8_t addr[] = {TAS578x, TAS575x};
|
|
|
|
for (int i = 0; i < sizeof(addr); i++) {
|
|
if (adac_read_byte(addr[i], 0) != 255) {
|
|
ESP_LOGI(TAG, "Detected TAS @0x%x", addr[i]);
|
|
return addr[i];
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|