mirror of
https://github.com/sle118/squeezelite-esp32.git
synced 2025-12-06 19:47:02 +03:00
122 lines
4.2 KiB
Plaintext
122 lines
4.2 KiB
Plaintext
menu "Network Manager Configuration"
|
|
|
|
menu "WiFi Options"
|
|
config WIFI_MANAGER_TASK_PRIORITY
|
|
int "RTOS Task Priority for the wifi_manager"
|
|
default 1
|
|
help
|
|
Tasks spawn by the manager will have a priority of WIFI_MANAGER_TASK_PRIORITY-1. For this particular reason, minimum recommended task priority is 2.
|
|
|
|
config WIFI_MANAGER_MAX_RETRY
|
|
int "Max Retry on failed connection"
|
|
default 2
|
|
help
|
|
Defines when a connection is lost/attempt to connect is made, how many retries should be made before giving up.
|
|
|
|
config DEFAULT_AP_SSID
|
|
string "Access Point SSID"
|
|
default "esp32"
|
|
help
|
|
SSID (network name) the the esp32 will broadcast.
|
|
|
|
config DEFAULT_AP_PASSWORD
|
|
string "Access Point Password"
|
|
default "esp32pwd"
|
|
help
|
|
Password used for the Access Point. Leave empty and set AUTH MODE to WIFI_AUTH_OPEN for no password.
|
|
|
|
config DEFAULT_AP_CHANNEL
|
|
int "Access Point WiFi Channel"
|
|
default 1
|
|
help
|
|
Be careful you might not see the access point if you use a channel not allowed in your country.
|
|
|
|
config DEFAULT_AP_IP
|
|
string "Access Point IP Address"
|
|
default "10.10.0.1"
|
|
help
|
|
This is used for the redirection to the captive portal. It is recommended to leave unchanged.
|
|
|
|
config DEFAULT_AP_GATEWAY
|
|
string "Access Point IP Gateway"
|
|
default "10.10.0.1"
|
|
help
|
|
This is used for the redirection to the captive portal. It is recommended to leave unchanged.
|
|
|
|
config DEFAULT_AP_NETMASK
|
|
string "Access Point Netmask"
|
|
default "255.255.255.0"
|
|
help
|
|
This is used for the redirection to the captive portal. It is recommended to leave unchanged.
|
|
|
|
config DEFAULT_AP_MAX_CONNECTIONS
|
|
int "Access Point Max Connections"
|
|
default 4
|
|
help
|
|
Max is 4.
|
|
|
|
config DEFAULT_AP_BEACON_INTERVAL
|
|
int "Access Point Beacon Interval (ms)"
|
|
default 100
|
|
help
|
|
100ms is the recommended default.
|
|
endmenu
|
|
menu "Ethernet Options"
|
|
visible if BASIC_I2C_BT && (ETH_USE_ESP32_EMAC || ETH_USE_SPI_ETHERNET)
|
|
choice
|
|
prompt "Ethernet Chipset"
|
|
default ETH_NODRIVER
|
|
config ETH_NODRIVER
|
|
bool "Defined in NVS"
|
|
config ETH_LAN8720
|
|
bool "Microchip LAN8720 (RMII)"
|
|
config ETH_DM9051
|
|
bool "Davicom 9051 (SPI)"
|
|
config ETH_W5500
|
|
bool "WIZnet 5500 (SPI)"
|
|
endchoice
|
|
comment "LAN8720 is an RMII interface and most of the required GPIOs aren't user selectable. They are defined as follow tx_en=21, tx0=19, tx1=22, rx0=25, rx1=26, crs_dv=27"
|
|
depends on ETH_LAN8720
|
|
config ETH_PHY_RST_IO
|
|
int "PHY Reset GPIO number" if !ETH_NODRIVER
|
|
default -1
|
|
help
|
|
Set the GPIO number used to reset PHY chip.
|
|
Set to -1 to disable PHY chip hardware reset.
|
|
config ETH_MDC_IO
|
|
int "SMI MDC GPIO number" if ETH_LAN8720
|
|
default -1
|
|
help
|
|
Set the GPIO number used by SMI MDC.
|
|
config ETH_MDIO_IO
|
|
int "SMI MDIO GPIO number" if ETH_LAN8720
|
|
default -1
|
|
help
|
|
Set the GPIO number used by SMI MDIO.
|
|
config ETH_SPI_HOST
|
|
int "SPI host number (-1,1 or 2)" if ETH_DM9051 || ETH_W5500
|
|
default -1
|
|
help
|
|
Set to -1 to use system's SPI config (see Various I/O)
|
|
Set to 2 or 3 to use a dedicated bus
|
|
config ETH_SPI_INTR_IO
|
|
int "interrupt" if ETH_DM9051 || ETH_W5500
|
|
default -1
|
|
config ETH_SPI_CS_IO
|
|
int "Chip Select" if ETH_DM9051 || ETH_W5500
|
|
default -1
|
|
config ETH_SPI_CLK_IO
|
|
int "SPI clock" if ETH_SPI_HOST != -1 && (ETH_DM9051 || ETH_W5500)
|
|
default -1
|
|
config ETH_SPI_MOSI_IO
|
|
int "Data Out" if ETH_SPI_HOST != -1 && (ETH_DM9051 || ETH_W5500)
|
|
default -1
|
|
config ETH_SPI_MISO_IO
|
|
int "Data In" if ETH_SPI_HOST != -1 && (ETH_DM9051 || ETH_W5500)
|
|
default -1
|
|
config ETH_SPI_SPEED
|
|
int "SPI speed (Hz)" if ETH_SPI_HOST != -1 && (ETH_DM9051 || ETH_W5500)
|
|
default 20000000
|
|
endmenu
|
|
endmenu
|