tweak dac_controlset timing - release

green led fix + i2c timeout - release
shidt i2c_addr by one for consistency - release
2025-12-09 21:17:18 +03:00 · 2020-09-01 16:23:41 -07:00 · 2020-09-01 13:41:17 -07:00 · 2020-08-31 15:37:29 -07:00 · 2020-08-31 11:34:04 -07:00
5 changed files with 9 additions and 9 deletions
--- a/README.md
+++ b/README.md
@@ -84,7 +84,7 @@ The parameter "dac_controlset" allows definition of simple commands to be sent o
  poweron: [ {"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"}, ... {{"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"} ],
  poweroff: [ {"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"}, ... {{"reg":<register>,"val":<value>,"mode":<nothing>|"or"|"and"} ] }
 ```
-This is standard JSON notation, so if you are not familiar with it, Google is your best friend. Be aware that the '...' means you can have as many entries as you want, it's not part of the syntax. Every section is optional, but it does not make sense to set i2c in the 'dac_config' parameter and not setting anything here. The parameter 'mode' allows to *or* the register with the value or to *and* it. Don't set 'mode' if you simply want to write. **Note that all values must be decimal**
+This is standard JSON notation, so if you are not familiar with it, Google is your best friend. Be aware that the '...' means you can have as many entries as you want, it's not part of the syntax. Every section is optional, but it does not make sense to set i2c in the 'dac_config' parameter and not setting anything here. The parameter 'mode' allows to *or* the register with the value or to *and* it. Don't set 'mode' if you simply want to write. **Note that all values must be decimal**. You can use a validator like [this](https://jsonlint.com) to verify your syntax

 NB: For well-known configuration, this is ignored
 ### SPDIF
--- a/components/display/core/ifaces/default_if_i2c.c
+++ b/components/display/core/ifaces/default_if_i2c.c
@@ -35,7 +35,7 @@ static bool I2CDefaultWriteData( struct GDS_Device* Device, const uint8_t* Data,
 bool GDS_I2CInit( int PortNumber, int SDA, int SCL, int Speed ) {
 	I2CPortNumber = PortNumber;
 	
-	I2CWait = pdMS_TO_TICKS( Speed ? Speed / 4000 : 100 );
+	I2CWait = pdMS_TO_TICKS( Speed ? (250 * 250000) / Speed : 250 );
 	
 	if (SDA != -1 && SCL != -1) {
 		i2c_config_t Config = { 0 };
--- a/components/squeezelite/external/dac_external.c
+++ b/components/squeezelite/external/dac_external.c
@@ -128,12 +128,12 @@ static esp_err_t i2c_write_reg(uint8_t reg, uint8_t val) {
    i2c_cmd_handle_t cmd = i2c_cmd_link_create();
    i2c_master_start(cmd);
 	
-	i2c_master_write_byte(cmd, i2c_addr | I2C_MASTER_WRITE, I2C_MASTER_NACK);
+	i2c_master_write_byte(cmd, (i2c_addr << 1) | I2C_MASTER_WRITE, I2C_MASTER_NACK);
 	i2c_master_write_byte(cmd, reg, I2C_MASTER_NACK);
 	i2c_master_write_byte(cmd, val, I2C_MASTER_NACK);
 	
 	i2c_master_stop(cmd);
-    ret = i2c_master_cmd_begin(i2c_port, cmd, 1000 / portTICK_RATE_MS);
+    ret = i2c_master_cmd_begin(i2c_port, cmd, 100 / portTICK_RATE_MS);
    i2c_cmd_link_delete(cmd);
 	
 	if (ret != ESP_OK) {
@@ -153,15 +153,15 @@ static uint8_t i2c_read_reg(uint8_t reg) {
 	i2c_cmd_handle_t cmd = i2c_cmd_link_create();
    i2c_master_start(cmd);
    
-	i2c_master_write_byte(cmd, i2c_addr | I2C_MASTER_WRITE, I2C_MASTER_NACK);
+	i2c_master_write_byte(cmd, (i2c_addr << 1) | I2C_MASTER_WRITE, I2C_MASTER_NACK);
 	i2c_master_write_byte(cmd, reg, I2C_MASTER_NACK);

 	i2c_master_start(cmd);			
-	i2c_master_write_byte(cmd, i2c_addr | I2C_MASTER_READ, I2C_MASTER_NACK);
+	i2c_master_write_byte(cmd, (i2c_addr << 1) | I2C_MASTER_READ, I2C_MASTER_NACK);
 	i2c_master_read_byte(cmd, &data, I2C_MASTER_NACK);
 	
    i2c_master_stop(cmd);
-	ret = i2c_master_cmd_begin(i2c_port, cmd, 1000 / portTICK_RATE_MS);
+	ret = i2c_master_cmd_begin(i2c_port, cmd, 100 / portTICK_RATE_MS);
 	i2c_cmd_link_delete(cmd);
 	
 	if (ret != ESP_OK) {
--- a/main/Kconfig.projbuild
+++ b/main/Kconfig.projbuild
@@ -44,7 +44,7 @@ menu "Squeezelite-ESP32"
 		string 
 		default "model=TAS57xx,bck=33,ws=25,do=32,sda=27,scl=26,mute=14:0" if SQUEEZEAMP
 		default "model=AC101,bck=27,ws=26,do=25,di=35,sda=33,scl=32" if A1S
-		default "model=I2S,bck=26,ws=25,do=33,i2c=106,sda=21,scl=22" if TWATCH2020
+		default "model=I2S,bck=26,ws=25,do=33,i2c=53,sda=21,scl=22" if TWATCH2020
 		default ""
 	config SPDIF_CONFIG		
 		string
--- a/main/esp_app_main.c
+++ b/main/esp_app_main.c
@@ -413,7 +413,7 @@ void app_main()

 	/* start the wifi manager */
 	ESP_LOGD(TAG,"Blinking led");
-	led_blink(LED_GREEN, 250, 250);
+	led_blink_pushed(LED_GREEN, 250, 250);

 	if(bypass_wifi_manager){
 		ESP_LOGW(TAG,"\n\nwifi manager is disabled. Please use wifi commands to connect to your wifi access point.\n\n");
Author	SHA1	Message	Date
Philippe G	29a74b9ca8	tweak dac_controlset timing - release	2020-09-01 16:23:41 -07:00
Philippe G	d95d1cd3db	green led fix + i2c timeout - release	2020-09-01 13:41:17 -07:00
Philippe G	8947f2fc75	shidt i2c_addr by one for consistency - release	2020-08-31 15:37:29 -07:00
philippe44	b6c296460c	Update README.md	2020-08-31 11:34:04 -07:00