Mirror/squeezelite-esp32
1
0
Fork 0
mirror of https://github.com/sle118/squeezelite-esp32.git synced 2025-12-09 21:17:18 +03:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
philippe44
2023-09-27 19:42:02 -07:00
committed by GitHub
parent 8df6b853e6
commit f5d6f26c01
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -229,7 +229,7 @@ Ground -------------------------- coax signal ground
The NVS parameter "display_config" sets the parameters for an optional display. It can be I2C (see [here](#i2c) for shared bus) or SPI (see [here](#spi) for shared bus) Syntax is The NVS parameter "display_config" sets the parameters for an optional display. It can be I2C (see [here](#i2c) for shared bus) or SPI (see [here](#spi) for shared bus) Syntax is
``` ```
I2C,width=<pixels>,height=<pixels>[address=<i2c_address>][,reset=<gpio>][,HFlip][,VFlip][driver=SSD1306|SSD1326[:1|4]|SSD1327|SH1106] I2C,width=<pixels>,height=<pixels>[address=<i2c_address>][,reset=<gpio>][,HFlip][,VFlip][driver=SSD1306|SSD1326[:1|4]|SSD1327|SH1106]
SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735[:x=<offset>][:y=<offset>]|ST7789|ILI9341[:16|18][,rotate]] SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789[:x=<offset>][:y=<offset>]|ILI9341[:16|18][,rotate]]
``` ```
- back: a LED backlight used by some older devices (ST7735). It is PWM controlled for brightness - back: a LED backlight used by some older devices (ST7735). It is PWM controlled for brightness
- reset: some display have a reset pin that is should normally be pulled up if unused. Most displays require reset and will not initialize well otherwise. - reset: some display have a reset pin that is should normally be pulled up if unused. Most displays require reset and will not initialize well otherwise.