diff --git a/README.md b/README.md
index 05e46f77..8109f43d 100644
--- a/README.md
+++ b/README.md
@@ -1,27 +1,6 @@
 [![Platform Build](https://github.com/sle118/squeezelite-esp32/actions/workflows/Platform_build.yml/badge.svg)](https://github.com/sle118/squeezelite-esp32/actions/workflows/Platform_build.yml)
 # Squeezelite-esp32
 
-### Sleeping
-The esp32 can be put in deep sleep mode to save some power. How much really depends on the connected periperals, so best is to do your own measures. Waking-up from deep sleep is the equivalent of a reboot, but as the chip takes a few seconds to connect, it's still an efficient process.
-
-The esp32 can enter deep sleep after an audio inactivity timeout, after a button has been pressed or after a GPIO is set to a given level. I wakes up only on GPIO levels. 
-
-The NVS parameter `sleep_config` is mostly used for setting sleep conditions
-```
-[delay=<mins>][,sleep=<gpio>[:0|1]][,wake=<gpio>[:0|1][|<gpio>[:0|1]...]
-```
-- delay is in **minutes**
-- sleep is the GPIO that will put the system into sleep and it can be a level 0 or 1
-- wake is a **list** of GPIOs that with cause it to wake up (reboot) with their respective values. In such list, GPIO's are separated by an actual '|'
-
-Be mindful that if the same GPIO is used to go to sleep and wakeup with the same level, in other word it's a transition/edge that triggers the action, the above will not work and the esp32 will immediately restart. In such case, you case use a button definition. The benefit of buttons is that not only can you re-use one actual button (e.g. 'stop') to make it the sleep trigger (using a long-press or a shift-press) but by selecting the ACTRLS_SLEEP action upon 'release', you can got to sleep upon release (1-0-1) but also wake up upon another press (0 level applied). 
-
-Please see [buttons](###buttons) for detailed syntax.
-
-Note that not all GPIOs can be used to wake-up the esp32 
-- ESP32: 0, 2, 4, 12-15, 25-27, 32-39;
-- ESP32-S3: 0-21.
-
 ## What is this?
 Squeezelite-esp32 is an audio software suite made to run on espressif's esp32 and esp32-s3 wifi (b/g/n) and bluetooth chipsets. It offers the following capabilities