diff --git a/README.md b/README.md
index 0e355884..8da842f9 100644
--- a/README.md
+++ b/README.md
@@ -54,7 +54,7 @@ The board showed above has the following IO set
 - D5 -> GPIO19 as well (muxed with key3)
 - The IO connector also brings GPIO5, GPIO18, GPIO19, GPIO21, GPIO22 and GPIO23 (don't forget it's muxed with keys!)
 - The JTAG connector uses GPIO 12, 13, 14 and 15 (see dip switched) but these are also used for SD-card (and 13 is key2)
-- It's alwats possible to re-use GPIOO (download at boot) and GPIO1/GPIO3 which are RX/TX of UART0 but you'll lose trace
+- It's always possible to re-use GPIOO (download at boot) and GPIO1/GPIO3 which are RX/TX of UART0 but you'll lose trace
 
 (note that some GPIO need pullups)