Mirror/squeezelite-esp32
1
0
Fork 0
mirror of https://github.com/sle118/squeezelite-esp32.git synced 2025-12-06 19:47:02 +03:00
Code Issues Packages Projects Releases Wiki Activity

make some room in recovery

Browse Source
This commit is contained in:
philippe44
2023-08-30 23:47:25 -07:00
parent 55053d5941
commit ad4d5db2f1
3 changed files with 18 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
components/platform_console/cmd_config.c
View File

@@ -33,6 +33,7 @@ const char * desc_ledvu= "Led Strip Options";
extern const struct adac_s *dac_set[];
extern void equalizer_set_loudness(uint8_t);
extern void register_optional_cmd(void);
#define CODECS_BASE "flac|pcm|mp3|ogg"
#if NO_FAAD
@@ -1340,7 +1341,7 @@ static void register_bt_source_config(void){
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd));
}
static void register_rotary_config(void){
void register_rotary_config(void){
rotary_args.rem = arg_rem("remark","One rotary encoder is supported, quadrature shift with press. Such encoders usually have 2 pins for encoders (A and B), and common C that must be set to ground and an optional SW pin for press. A, B and SW must be pulled up, so automatic pull-up is provided by ESP32, but you can add your own resistors. A bit of filtering on A and B (~470nF) helps for debouncing which is not made by software.\r\nEncoder is normally hard-coded to respectively knob left, right and push on LMS and to volume down/up/play toggle on BT and AirPlay.");
rotary_args.A = arg_int1(NULL,"A","gpio","A/DT gpio");
rotary_args.B = arg_int1(NULL,"B","gpio","B/CLK gpio");
@@ -1363,7 +1364,7 @@ static void register_rotary_config(void){
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd));
}
static void register_ledvu_config(void){
void register_ledvu_config(void){
ledvu_args.type = arg_str1(NULL,"type","<none>|WS2812","Led type (supports one rgb strip to display built in effects and allow remote control through 'dmx' messaging)");
ledvu_args.length = arg_int1(NULL,"length","<1..255>","Strip length (1-255 supported)");
ledvu_args.gpio = arg_int1(NULL,"gpio","gpio","Data pin");
@@ -1381,7 +1382,7 @@ static void register_ledvu_config(void){
ESP_ERROR_CHECK(esp_console_cmd_register(&cmd));
}
static void register_audio_config(void){
void register_audio_config(void){
audio_args.jack_behavior = arg_str0("j", "jack_behavior","Headphones|Subwoofer","On supported DAC, determines the audio jack behavior. Selecting headphones will cause the external amp to be muted on insert, while selecting Subwoofer will keep the amp active all the time.");
audio_args.loudness = arg_int0("l", "loudness","0-100","Sets the loudness level, from 0 to 100. 0 will disable the loudness completely.");
audio_args.end = arg_end(6);
@@ -1464,8 +1465,6 @@ void register_config_cmd(void){
#ifdef CONFIG_CSPOT_SINK
register_cspot_config();
#endif
register_audio_config();
// register_squeezelite_config();
register_bt_source_config();
if(!is_dac_config_locked()){
register_i2s_config();
@@ -1473,7 +1472,6 @@ void register_config_cmd(void){
if(!is_spdif_config_locked()){
register_spdif_config();
}
register_rotary_config();
register_ledvu_config();
register_optional_cmd();
}