From a13afd76c96ace1e5a7d114a47616baf9d77cbda Mon Sep 17 00:00:00 2001
From: Mum-Pf <MumPf@email-ausdrucker.de>
Date: Fri, 2 Apr 2021 20:18:39 +0200
Subject: [PATCH] Update README.md

NVS parameter for ILI9341
---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index 0a95b02f..6d198905 100644
--- a/README.md
+++ b/README.md
@@ -172,7 +172,7 @@ Ground -------------------------- coax signal ground
 The NVS parameter "display_config" sets the parameters for an optional display. Syntax is
 ```
 I2C,width=<pixels>,height=<pixels>[address=<i2c_address>][,reset=<gpio>][,HFlip][,VFlip][driver=SSD1306|SSD1326[:1|4]|SSD1327|SH1106]
-SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789[,rotate]]
+SPI,width=<pixels>,height=<pixels>,cs=<gpio>[,back=<gpio>][,reset=<gpio>][,speed=<speed>][,HFlip][,VFlip][driver=SSD1306|SSD1322|SSD1326[:1|4]|SSD1327|SH1106|SSD1675|ST7735|ST7789|ILI9341[:16|18][,rotate]]
 ```
 - back: a LED backlight used by some older devices (ST7735). It is PWM controlled for brightness
 - reset: some display have a reset pin that is should normally be pulled up if unused