Merge branch 'master' of https://github.com/sle118/squeezelite-esp32.git

Conflicts:
	components/config/config.c
	components/display/driver_SSD1306.c

components/config/config.c

@@ -70,7 +70,7 @@ void config_set_entry_changed_flag(cJSON * entry, cJSON_bool flag);
 		void * pval = config_alloc_get(nt, key);\
 		if(pval!=NULL){ *value = *(t * )pval; free(pval); return ESP_OK; }\
 		return ESP_FAIL;}
-#ifdef RECOVERY_APPLICATION
+#if RECOVERY_APPLICATION==0
 static void * malloc_fn(size_t sz){
 
 	void * ptr = heap_caps_malloc(sz, MALLOC_CAP_SPIRAM);
@@ -81,7 +81,7 @@ static void * malloc_fn(size_t sz){
 }
 static void * free_fn(void * ptr){
 	if(ptr!=NULL){
-		free(ptr);
+		heap_caps_free(ptr);
 	}
 	else {
 		ESP_LOGW(TAG,"free_fn: Cannot free null pointer!");
@@ -92,7 +92,7 @@ static void * free_fn(void * ptr){
 void init_cJSON(){
 	// initialize cJSON hooks it uses SPIRAM memory
 	// as opposed to IRAM
-#ifndef RECOVERY_APPLICATION
+#if RECOVERY_APPLICATION==0
 	static cJSON_Hooks hooks;
 	// In squeezelite mode, allocate memory from PSRAM.  Otherwise allocate from internal RAM
 	// as recovery will lock flash access when erasing FLASH or writing to OTA partition.
@@ -229,6 +229,8 @@ cJSON * config_set_value_safe(nvs_type_t nvs_type, const char *key, void * value
 		}
 		else {
 			ESP_LOGD(TAG, "Config not changed. ");
+			cJSON_Delete(entry);
+			entry = existing;
 		}
 	}
 	else {
@@ -698,7 +700,6 @@ esp_err_t config_set_value(nvs_type_t nvs_type, const char *key, void * value){
 		else {
 			ESP_LOGV(TAG,"config_set_value completed");
 		}
-
 	}
 	config_unlock();
 	return result;

components/display/driver_SSD1306.c

@@ -23,13 +23,13 @@
 #include <arpa/inet.h>
 #include "esp_log.h"
 #include "display.h"
+#include "globdefs.h"
 
 #include "ssd1306.h"
 #include "ssd1306_draw.h"
 #include "ssd1306_font.h"
 #include "ssd1306_default_if.h"
 
-#define I2C_PORT 	1
 #define I2C_ADDRESS	0x3C
 #define LINELEN		40
 static const char *TAG = "display";
@@ -77,40 +77,26 @@ static bool display_init(char *config, char *welcome) {
 	bool res = false;
 
 	if (strstr(config, "I2C")) {
-		int scl = -1, sda = -1;
 		int width = -1, height = -1, address=I2C_ADDRESS;
 		char *p;
 		ESP_LOGI(TAG, "Initializing I2C display with config: %s",config);
 		// no time for smart parsing - this is for tinkerers
-		if ((p = strcasestr(config, "scl")) != NULL) scl = atoi(strchr(p, '=') + 1);
-		if ((p = strcasestr(config, "sda")) != NULL) sda = atoi(strchr(p, '=') + 1);
 		if ((p = strcasestr(config, "width")) != NULL) width = atoi(strchr(p, '=') + 1);
 		if ((p = strcasestr(config, "height")) != NULL) height = atoi(strchr(p, '=') + 1);
 		if ((p = strcasestr(config, "address")) != NULL) address = atoi(strchr(p, '=') + 1);
 
-		if (sda != -1 && scl != -1 && width != -1 && height != -1) {
+		
-			res = SSD1306_I2CMasterInitDefault( I2C_PORT, sda, scl );
+		if (width != -1 && height != -1) {
-			if(!res){
+			SSD1306_I2CMasterInitDefault( i2c_system_port, -1, -1 ) ;
-				ESP_LOGE(TAG,"I2C Master Init failed");
+			SSD1306_I2CMasterAttachDisplayDefault( &I2CDisplay, width, height, address, -1 );
-			}
+			SSD1306_SetHFlip( &I2CDisplay, strcasestr(config, "HFlip") ? true : false);
-		}
+			SSD1306_SetVFlip( &I2CDisplay, strcasestr(config, "VFlip") ? true : false);
-		if(res){
+			SSD1306_SetFont( &I2CDisplay, &Font_droid_sans_fallback_15x17 );
-			res = SSD1306_I2CMasterAttachDisplayDefault( &I2CDisplay, width, height, address, -1);
-			if(!res){
-				ESP_LOGE(TAG,"Attach Display default failed");
-			}
-		}
-		if(res){
-			res = SSD1306_SetFont( &I2CDisplay, &Font_droid_sans_fallback_15x17 );
-			if(!res){
-				ESP_LOGE(TAG,"Set Font failed");
-			}
-		}
-		if(res){
 			print_message(welcome);
-			ESP_LOGI(TAG, "Initialized I2C display %dx%d (sda:%d, scl:%d, address:%02x)", width, height, sda, scl, address);
+			ESP_LOGI(TAG, "Initialized I2C display %dx%d", width, height);
+			res = true;
 		} else {
-			ESP_LOGE(TAG, "Cannot initialized I2C display %s [%dx%d sda:%d, scl:%d, address:%02x]", config, width, height, sda, scl, address);
+			ESP_LOGI(TAG, "Cannot initialized I2C display %s [%dx%d]", config, width, height);
 		}
 	} else {
 		ESP_LOGE(TAG, "Non-I2C display not supported. Display config %s", config);

components/display/tarablessd1306/ifaces/default_if_i2c.c

@@ -32,21 +32,21 @@ static bool I2CDefaultReset( struct SSD1306_Device* Display );
  * Returns true on successful init of the i2c bus.
  */
 bool SSD1306_I2CMasterInitDefault( int PortNumber, int SDA, int SCL ) {
-    i2c_config_t Config;
-
-    memset( &Config, 0, sizeof( i2c_config_t ) );
-
-    Config.mode = I2C_MODE_MASTER;
-    Config.sda_io_num = SDA;
-    Config.sda_pullup_en = GPIO_PULLUP_ENABLE;
-    Config.scl_io_num = SCL;
-    Config.scl_pullup_en = GPIO_PULLUP_ENABLE;
-    Config.master.clk_speed = I2CDisplaySpeed;
-
 	I2CPortNumber = PortNumber;
+	
+	if (SDA != -1 && SCL != -1) {
+		i2c_config_t Config = { 0 };
 
-    ESP_ERROR_CHECK_NONFATAL( i2c_param_config( I2CPortNumber, &Config ), return false );
+        Config.mode = I2C_MODE_MASTER;
-    ESP_ERROR_CHECK_NONFATAL( i2c_driver_install( I2CPortNumber, Config.mode, 0, 0, 0 ), return false );
+		Config.sda_io_num = SDA;
+		Config.sda_pullup_en = GPIO_PULLUP_ENABLE;
+		Config.scl_io_num = SCL;
+		Config.scl_pullup_en = GPIO_PULLUP_ENABLE;
+		Config.master.clk_speed = I2CDisplaySpeed;
+
+		ESP_ERROR_CHECK_NONFATAL( i2c_param_config( I2CPortNumber, &Config ), return false );
+		ESP_ERROR_CHECK_NONFATAL( i2c_driver_install( I2CPortNumber, Config.mode, 0, 0, 0 ), return false );
+	}	
 
     return true;
 }

components/services/buttons.c

@@ -41,7 +41,7 @@ static int n_buttons = 0;
 #define DEBOUNCE			50
 
 static EXT_RAM_ATTR struct button_s {
-	void *id;
+	void *client;
 	int gpio;
 	int debounce;
 	button_handler handler;
@@ -123,18 +123,18 @@ static void buttons_task(void* arg) {
 			if (event == BUTTON_RELEASED) {
 				// early release of a long-press button, send press/release
 				if (!button.shifting) {
-					(*button.handler)(button.id, BUTTON_PRESSED, press, false);		
+					(*button.handler)(button.client, BUTTON_PRESSED, press, false);		
-					(*button.handler)(button.id, BUTTON_RELEASED, press, false);		
+					(*button.handler)(button.client, BUTTON_RELEASED, press, false);		
 				}
 				// button is a copy, so need to go to real context
 				button.self->shifting = false;
 			} else if (!button.shifting) {
 				// normal long press and not shifting so don't discard
-				(*button.handler)(button.id, BUTTON_PRESSED, press, true);
+				(*button.handler)(button.client, BUTTON_PRESSED, press, true);
 			}  
 		} else {
 			// normal press/release of a button or release of a long-press button
-			if (!button.shifting) (*button.handler)(button.id, event, press, button.long_press);
+			if (!button.shifting) (*button.handler)(button.client, event, press, button.long_press);
 			// button is a copy, so need to go to real context
 			button.self->shifting = false;
 		}
@@ -151,7 +151,7 @@ void dummy_handler(void *id, button_event_e event, button_press_e press) {
 /****************************************************************************************
  * Create buttons 
  */
-void button_create(void *id, int gpio, int type, bool pull, int debounce, button_handler handler, int long_press, int shifter_gpio) { 
+void button_create(void *client, int gpio, int type, bool pull, int debounce, button_handler handler, int long_press, int shifter_gpio) { 
 	static DRAM_ATTR StaticTask_t xTaskBuffer __attribute__ ((aligned (4)));
 	static EXT_RAM_ATTR StackType_t xStack[BUTTON_STACK_SIZE] __attribute__ ((aligned (4)));
 
@@ -168,7 +168,7 @@ void button_create(void *id, int gpio, int type, bool pull, int debounce, button
 	memset(buttons + n_buttons, 0, sizeof(struct button_s));
 
 	// set mandatory parameters
-	buttons[n_buttons].id = id;
+	buttons[n_buttons].client = client;
  	buttons[n_buttons].gpio = gpio;
  	buttons[n_buttons].debounce = debounce ? debounce: DEBOUNCE;
 	buttons[n_buttons].handler = handler;
@@ -213,4 +213,54 @@ void button_create(void *id, int gpio, int type, bool pull, int debounce, button
 	gpio_intr_enable(gpio);
 
 	n_buttons++;
-}	
+}	
+
+/****************************************************************************************
+ * Get stored id
+ */
+ void button_get_client(int gpio) {
+	 for (int i = 0; i < n_buttons; i++) {
+		 if (buttons[i].gpio == gpio) return buttons[i].client;
+	 }
+	 return NULL;
+ }
+
+/****************************************************************************************
+ * Update buttons 
+ */
+void *button_remap(void *client, int gpio, button_handler handler, int long_press, int shifter_gpio) { 
+	int i;
+	struct button_s *button = NULL;
+	void *prev_client;
+	
+	ESP_LOGI(TAG, "remapping GPIO %u, long press %u shifter %u", gpio, long_press, shifter_gpio);
+
+	// find button
+	for (i = 0; i < n_buttons; i++) {
+		if (buttons[i].gpio == gpio) {
+			button = buttons + i;
+			break;
+		}	
+	}	
+	
+	// huh
+	if (!button) return NULL;	
+	
+	prev_client = button->client;
+	button->client = client;
+ 	button->handler = handler;
+	button->long_press = long_press;
+	button->shifter_gpio = shifter_gpio;
+
+	// find our shifter	(if any)	
+	for (i = 0; shifter_gpio != -1 && i < n_buttons; i++) {
+		if (buttons[i].gpio == shifter_gpio) {
+			button->shifter = buttons + i;
+			// a shifter must have a long-press handler
+			if (!buttons[i].long_press) buttons[i].long_press = -1;
+			break;
+		}
+	}
+	
+	return prev_client;
+}

components/services/buttons.h

@@ -33,4 +33,6 @@ set shifter_gpio to -1 for no shift
 NOTE: shifter buttons *must* be created before shiftee
 */
 
-void button_create(void *id, int gpio, int type, bool pull, int debounce, button_handler handler, int long_press, int shifter_gpio);
+void button_create(void *client, int gpio, int type, bool pull, int debounce, button_handler handler, int long_press, int shifter_gpio);
+void *button_remap(void *client, int gpio, button_handler handler, int long_press, int shifter_gpio);
+void button_get_client(int gpio);

components/services/globdefs.h

@@ -0,0 +1,34 @@
+/* 
+ *  Squeezelite for esp32
+ *
+ *  (c) Philippe G. 2019, philippe_44@outlook.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+ 
+#pragma once
+
+#define I2C_SYSTEM_PORT	1
+extern int i2c_system_port;
+
+#ifdef CONFIG_SQUEEZEAMP
+#define JACK_GPIO		34
+#define SPKFAULT_GPIO	2			// this requires a pull-up, so can't be >34
+#define LED_GREEN_GPIO 	12
+#define LED_RED_GPIO	13
+#else 
+#define LED_GREEN_GPIO	CONFIG_LED_GREEN_GPIO
+#define LED_RED_GPIO	CONFIG_LED_RED_GPIO
+#endif

components/services/monitor.c

@@ -18,11 +18,7 @@
 #include "driver/gpio.h"
 #include "buttons.h"
 #include "led.h"
-
+#include "globdefs.h"
-#ifdef CONFIG_SQUEEZEAMP
-#define JACK_GPIO		34
-#define SPKFAULT_GPIO	2			// this requires a pull-up, so can't be >34
-#endif
 
 #define MONITOR_TIMER	(10*1000)
 

components/services/services.c

@@ -9,33 +9,69 @@
 #include <stdio.h>
 #include "esp_log.h"
 #include "driver/gpio.h"
+#include <driver/i2c.h>
+#include "config.h"
 #include "battery.h"
 #include "led.h"
 #include "monitor.h"
+#include "globdefs.h"
 
 extern void battery_svc_init(void);
 extern void monitor_svc_init(void);
 extern void led_svc_init(void);
 
-static const char TAG[] = "services";
+int i2c_system_port = I2C_SYSTEM_PORT;
 
-#ifdef CONFIG_SQUEEZEAMP
+static const char *TAG = "services";
-#define LED_GREEN_GPIO 	12
-#define LED_RED_GPIO	13
-#endif
 
 /****************************************************************************************
  * 
  */
 void services_init(void) {
+	int scl = -1, sda = -1, i2c_speed = 250000;
+	char *nvs_item, *p;
+	
 	gpio_install_isr_service(0);
+	
+	nvs_item = config_alloc_get(NVS_TYPE_STR, "i2c_config");
+	
+	if (nvs_item) {
+		if ((p = strcasestr(nvs_item, "scl")) != NULL) scl = atoi(strchr(p, '=') + 1);
+		if ((p = strcasestr(nvs_item, "sda")) != NULL) sda = atoi(strchr(p, '=') + 1);
+		if ((p = strcasestr(nvs_item, "speed")) != NULL) i2c_speed = atoi(strchr(p, '=') + 1);
+		if ((p = strcasestr(nvs_item, "port")) != NULL) i2c_system_port = atoi(strchr(p, '=') + 1);
+		free(nvs_item);
+	}
+	
+#ifdef CONFIG_SQUEEZEAMP
+	if (i2c_system_port == 0) {
+		i2c_system_port = 1;
+		ESP_LOGE(TAG, "can't use i2c port 0 on SqueezeAMP");
+	}
+#endif
+
+	ESP_LOGI(TAG,"Configuring I2C sda:%d scl:%d port:%u speed:%u", sda, scl, i2c_system_port, i2c_speed);
+
+	if (sda != -1 && scl != -1) {
+		i2c_config_t i2c = { 0 };
+		
+		i2c.mode = I2C_MODE_MASTER;
+		i2c.sda_io_num = sda;
+		i2c.sda_pullup_en = GPIO_PULLUP_ENABLE;
+		i2c.scl_io_num = scl;
+		i2c.scl_pullup_en = GPIO_PULLUP_ENABLE;
+		i2c.master.clk_speed = i2c_speed;
+		
+		i2c_param_config(i2c_system_port, &i2c);
+		i2c_driver_install(i2c_system_port, i2c.mode, 0, 0, 0 );
+	} else {
+		ESP_LOGE(TAG, "can't initialize I2C");
+	}	
 
 	ESP_LOGD(TAG,"Configuring LEDs");
 	led_svc_init();
-#ifdef CONFIG_SQUEEZEAMP
 	led_config(LED_GREEN, LED_GREEN_GPIO, 0);
 	led_config(LED_RED, LED_RED_GPIO, 0);
-#endif
 
 	battery_svc_init();
 	monitor_svc_init();

main/Kconfig.projbuild

@@ -192,12 +192,31 @@ menu "Squeezelite-ESP32"
 			string "Screen configuraton"
 			default ""
 			help
-				Set parameters of display screen, leave empty for no screen
+				Set parameters for display screen, leave empty for no screen
-				I2C,width=<size>,height=<size>,sda=<gpio>,scl=<gpio>
+				I2C,width=<size>,height=<size>
-				SPI,width=<size>,height=<size>,data=<gpio>,clock=<gpio>,select=<gpio>
+				SPI,width=<size>,height=<size>,select=<gpio>
 		config DISPLAY_I2C_SPEED
 			int "I2C bus speed"
 				default 250000
 	endmenu	
-
+	
+	menu "Various I/O"
+		config I2C_CONFIG
+			string "I2C system configuration"
+			default ""
+			help
+				Set parameters of shared I2C interface
+				sda=<gpio>,scl=<gpio>,speed=<num>,port=<0|1>
+		config LED_GREEN_GPIO
+			int "Green led GPIO"
+			default -1
+			help
+				Set to -1 for no LED
+		config LED_RED_GPIO				
+			int "Red led GPIO"
+			default -1
+			help
+				Set to -1 for no LED
+	endmenu	
+	
 endmenu

main/esp_app_main.c

@@ -312,6 +312,9 @@ void register_default_nvs(){
 	ESP_LOGD(TAG,"Registering default value for key %s, value %s", "display_config", STR(CONFIG_DISPLAY_CONFIG));
 	config_set_default(NVS_TYPE_STR, "display_config", STR(CONFIG_DISPLAY_CONFIG), 0);
 	
+	ESP_LOGD(TAG,"Registering default value for key %s", "i2c_config");
+	config_set_default(NVS_TYPE_STR, "i2c_config", "", 0);
+	
 	ESP_LOGD(TAG,"Done setting default values in nvs.");
 }
 

plugin/repo.xml

@@ -7,7 +7,7 @@
       <sha>799ae4860f9c009ac25c2ec35eb4070c5f474659</sha>
       <email>philippe_44@outlook.com</email>
       <desc lang="EN">SqueezeESP32 additional player id (100)</desc>
-      <url>http://github.com/sle118/squeezelite-esp32/raw/master/plugin/SqueezeESP32/SqueezeESP32.zip</url>
+      <url>http://github.com/sle118/squeezelite-esp32/raw/master/plugin/SqueezeESP32.zip</url>
       <title lang="EN">SqueezeESP32</title>
     </plugin>
   </plugins>