From e154718e90e4fce56c2353d805ab119a6a76d563 Mon Sep 17 00:00:00 2001 From: Slava-Shchipunov Date: Sun, 3 Nov 2024 22:19:36 +0700 Subject: [PATCH] refactor: move wg-awg setup to install.sh --- install.sh | 132 +++++++++++++++++++++++++++++++++++++++++- utils/wg-awg-setup.sh | 128 ---------------------------------------- 2 files changed, 129 insertions(+), 131 deletions(-) delete mode 100644 utils/wg-awg-setup.sh diff --git a/install.sh b/install.sh index bcdffae..3694f0a 100755 --- a/install.sh +++ b/install.sh @@ -1,7 +1,6 @@ #!/bin/sh REPO="https://api.github.com/repos/itdoginfo/podkop/releases/latest" -BASE_RAW_URL="https://raw.githubusercontent.com/itdoginfo/domain-routing-openwrt/refs/heads/main" DOWNLOAD_DIR="/tmp/podkop" mkdir -p "$DOWNLOAD_DIR" @@ -113,6 +112,133 @@ install_awg_packages() { rm -rf "$AWG_DIR" } +wg_awg_setup() { + PROTOCOL_NAME=$1 + printf "\033[32;1mConfigure ${PROTOCOL_NAME}\033[0m\n" + if [ "$PROTOCOL_NAME" = 'Wireguard' ]; then + INTERFACE_NAME="wg0" + CONFIG_NAME="wireguard_wg0" + PROTO="wireguard" + ZONE_NAME="wg" + fi + + if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then + INTERFACE_NAME="awg0" + CONFIG_NAME="amneziawg_awg0" + PROTO="amneziawg" + ZONE_NAME="awg" + + echo "Do you want to use AmneziaWG config or basic Wireguard config + automatic obfuscation?" + echo "1) AmneziaWG" + echo "2) Wireguard + automatic obfuscation" + read CONFIG_TYPE + fi + + read -r -p "Enter the private key (from [Interface]):"$'\n' WG_PRIVATE_KEY_INT + + while true; do + read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' WG_IP + if echo "$WG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then + break + else + echo "This IP is not valid. Please repeat" + fi + done + + read -r -p "Enter the public key (from [Peer]):"$'\n' WG_PUBLIC_KEY_INT + read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' WG_PRESHARED_KEY_INT + read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' WG_ENDPOINT_INT + + read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' WG_ENDPOINT_PORT_INT + WG_ENDPOINT_PORT_INT=${WG_ENDPOINT_PORT_INT:-51820} + if [ "$WG_ENDPOINT_PORT_INT" = '51820' ]; then + echo $WG_ENDPOINT_PORT_INT + fi + + if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then + if [ "$CONFIG_TYPE" = '1' ]; then + read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC + read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN + read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX + read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1 + read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2 + read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1 + read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2 + read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3 + read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4 + elif [ "$CONFIG_TYPE" = '2' ]; then + #Default values to wg automatic obfuscation + AWG_JC=4 + AWG_JMIN=40 + AWG_JMAX=70 + AWG_S1=0 + AWG_S2=0 + AWG_H1=1 + AWG_H2=2 + AWG_H3=3 + AWG_H4=4 + fi + fi + + uci set network.${INTERFACE_NAME}=interface + uci set network.${INTERFACE_NAME}.proto=$PROTO + uci set network.${INTERFACE_NAME}.private_key=$WG_PRIVATE_KEY_INT + uci set network.${INTERFACE_NAME}.listen_port='51821' + uci set network.${INTERFACE_NAME}.addresses=$WG_IP + + if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then + uci set network.${INTERFACE_NAME}.awg_jc=$AWG_JC + uci set network.${INTERFACE_NAME}.awg_jmin=$AWG_JMIN + uci set network.${INTERFACE_NAME}.awg_jmax=$AWG_JMAX + uci set network.${INTERFACE_NAME}.awg_s1=$AWG_S1 + uci set network.${INTERFACE_NAME}.awg_s2=$AWG_S2 + uci set network.${INTERFACE_NAME}.awg_h1=$AWG_H1 + uci set network.${INTERFACE_NAME}.awg_h2=$AWG_H2 + uci set network.${INTERFACE_NAME}.awg_h3=$AWG_H3 + uci set network.${INTERFACE_NAME}.awg_h4=$AWG_H4 + fi + + if ! uci show network | grep -q ${CONFIG_NAME}; then + uci add network ${CONFIG_NAME} + fi + + uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME + uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client" + uci set network.@${CONFIG_NAME}[0].public_key=$WG_PUBLIC_KEY_INT + uci set network.@${CONFIG_NAME}[0].preshared_key=$WG_PRESHARED_KEY_INT + uci set network.@${CONFIG_NAME}[0].route_allowed_ips='0' + uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25' + uci set network.@${CONFIG_NAME}[0].endpoint_host=$WG_ENDPOINT_INT + uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0' + uci set network.@${CONFIG_NAME}[0].endpoint_port=$WG_ENDPOINT_PORT_INT + uci commit network + + if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then + printf "\033[32;1mZone Create\033[0m\n" + uci add firewall zone + uci set firewall.@zone[-1].name=$ZONE_NAME + uci set firewall.@zone[-1].network=$INTERFACE_NAME + uci set firewall.@zone[-1].forward='REJECT' + uci set firewall.@zone[-1].output='ACCEPT' + uci set firewall.@zone[-1].input='REJECT' + uci set firewall.@zone[-1].masq='1' + uci set firewall.@zone[-1].mtu_fix='1' + uci set firewall.@zone[-1].family='ipv4' + uci commit firewall + fi + + if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then + printf "\033[32;1mConfigured forwarding\033[0m\n" + uci add firewall forwarding + uci set firewall.@forwarding[-1]=forwarding + uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan" + uci set firewall.@forwarding[-1].dest=${ZONE_NAME} + uci set firewall.@forwarding[-1].src='lan' + uci set firewall.@forwarding[-1].family='ipv4' + uci commit firewall + fi +} + add_tunnel() { echo "What type of VPN or proxy will be used?" echo "1) VLESS, Shadowsocks (A sing-box will be installed)" @@ -138,7 +264,7 @@ add_tunnel() { read IS_SHOULD_CONFIGURE_WG_INTERFACE if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then - sh <(wget -O - "$BASE_RAW_URL/utils/wg-awg-setup.sh") Wireguard + wg_awg_setup Wireguard else printf "\e[1;32mUse these instructions to manual configure https://itdog.info/nastrojka-klienta-wireguard-na-openwrt/\e[0m\n" fi @@ -153,7 +279,7 @@ add_tunnel() { read IS_SHOULD_CONFIGURE_WG_INTERFACE if [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "y" ] || [ "$IS_SHOULD_CONFIGURE_WG_INTERFACE" = "Y" ]; then - sh <(wget -O - "$BASE_RAW_URL/utils/wg-awg-setup.sh") AmneziaWG + wg_awg_setup AmneziaWG fi break diff --git a/utils/wg-awg-setup.sh b/utils/wg-awg-setup.sh deleted file mode 100644 index c4ebbc1..0000000 --- a/utils/wg-awg-setup.sh +++ /dev/null @@ -1,128 +0,0 @@ -wg_awg_setup() { - PROTOCOL_NAME=$1 - printf "\033[32;1mConfigure ${PROTOCOL_NAME}\033[0m\n" - if [ "$PROTOCOL_NAME" = 'Wireguard' ]; then - INTERFACE_NAME="wg0" - CONFIG_NAME="wireguard_wg0" - PROTO="wireguard" - ZONE_NAME="wg" - fi - - if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then - INTERFACE_NAME="awg0" - CONFIG_NAME="amneziawg_awg0" - PROTO="amneziawg" - ZONE_NAME="awg" - - echo "Do you want to use AmneziaWG config or basic Wireguard config + automatic obfuscation?" - echo "1) AmneziaWG" - echo "2) Wireguard + automatic obfuscation" - read CONFIG_TYPE - fi - - read -r -p "Enter the private key (from [Interface]):"$'\n' WG_PRIVATE_KEY_INT - - while true; do - read -r -p "Enter internal IP address with subnet, example 192.168.100.5/24 (from [Interface]):"$'\n' WG_IP - if echo "$WG_IP" | egrep -oq '^([0-9]{1,3}\.){3}[0-9]{1,3}/[0-9]+$'; then - break - else - echo "This IP is not valid. Please repeat" - fi - done - - read -r -p "Enter the public key (from [Peer]):"$'\n' WG_PUBLIC_KEY_INT - read -r -p "If use PresharedKey, Enter this (from [Peer]). If your don't use leave blank:"$'\n' WG_PRESHARED_KEY_INT - read -r -p "Enter Endpoint host without port (Domain or IP) (from [Peer]):"$'\n' WG_ENDPOINT_INT - - read -r -p "Enter Endpoint host port (from [Peer]) [51820]:"$'\n' WG_ENDPOINT_PORT_INT - WG_ENDPOINT_PORT_INT=${WG_ENDPOINT_PORT_INT:-51820} - if [ "$WG_ENDPOINT_PORT_INT" = '51820' ]; then - echo $WG_ENDPOINT_PORT_INT - fi - - if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then - if [ "$CONFIG_TYPE" = '1' ]; then - read -r -p "Enter Jc value (from [Interface]):"$'\n' AWG_JC - read -r -p "Enter Jmin value (from [Interface]):"$'\n' AWG_JMIN - read -r -p "Enter Jmax value (from [Interface]):"$'\n' AWG_JMAX - read -r -p "Enter S1 value (from [Interface]):"$'\n' AWG_S1 - read -r -p "Enter S2 value (from [Interface]):"$'\n' AWG_S2 - read -r -p "Enter H1 value (from [Interface]):"$'\n' AWG_H1 - read -r -p "Enter H2 value (from [Interface]):"$'\n' AWG_H2 - read -r -p "Enter H3 value (from [Interface]):"$'\n' AWG_H3 - read -r -p "Enter H4 value (from [Interface]):"$'\n' AWG_H4 - elif [ "$CONFIG_TYPE" = '2' ]; then - #Default values to wg automatic obfuscation - AWG_JC=4 - AWG_JMIN=40 - AWG_JMAX=70 - AWG_S1=0 - AWG_S2=0 - AWG_H1=1 - AWG_H2=2 - AWG_H3=3 - AWG_H4=4 - fi - fi - - uci set network.${INTERFACE_NAME}=interface - uci set network.${INTERFACE_NAME}.proto=$PROTO - uci set network.${INTERFACE_NAME}.private_key=$WG_PRIVATE_KEY_INT - uci set network.${INTERFACE_NAME}.listen_port='51821' - uci set network.${INTERFACE_NAME}.addresses=$WG_IP - - if [ "$PROTOCOL_NAME" = 'AmneziaWG' ]; then - uci set network.${INTERFACE_NAME}.awg_jc=$AWG_JC - uci set network.${INTERFACE_NAME}.awg_jmin=$AWG_JMIN - uci set network.${INTERFACE_NAME}.awg_jmax=$AWG_JMAX - uci set network.${INTERFACE_NAME}.awg_s1=$AWG_S1 - uci set network.${INTERFACE_NAME}.awg_s2=$AWG_S2 - uci set network.${INTERFACE_NAME}.awg_h1=$AWG_H1 - uci set network.${INTERFACE_NAME}.awg_h2=$AWG_H2 - uci set network.${INTERFACE_NAME}.awg_h3=$AWG_H3 - uci set network.${INTERFACE_NAME}.awg_h4=$AWG_H4 - fi - - if ! uci show network | grep -q ${CONFIG_NAME}; then - uci add network ${CONFIG_NAME} - fi - - uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME - uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client" - uci set network.@${CONFIG_NAME}[0].public_key=$WG_PUBLIC_KEY_INT - uci set network.@${CONFIG_NAME}[0].preshared_key=$WG_PRESHARED_KEY_INT - uci set network.@${CONFIG_NAME}[0].route_allowed_ips='0' - uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25' - uci set network.@${CONFIG_NAME}[0].endpoint_host=$WG_ENDPOINT_INT - uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0' - uci set network.@${CONFIG_NAME}[0].endpoint_port=$WG_ENDPOINT_PORT_INT - uci commit network - - if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then - printf "\033[32;1mZone Create\033[0m\n" - uci add firewall zone - uci set firewall.@zone[-1].name=$ZONE_NAME - uci set firewall.@zone[-1].network=$INTERFACE_NAME - uci set firewall.@zone[-1].forward='REJECT' - uci set firewall.@zone[-1].output='ACCEPT' - uci set firewall.@zone[-1].input='REJECT' - uci set firewall.@zone[-1].masq='1' - uci set firewall.@zone[-1].mtu_fix='1' - uci set firewall.@zone[-1].family='ipv4' - uci commit firewall - fi - - if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then - printf "\033[32;1mConfigured forwarding\033[0m\n" - uci add firewall forwarding - uci set firewall.@forwarding[-1]=forwarding - uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan" - uci set firewall.@forwarding[-1].dest=${ZONE_NAME} - uci set firewall.@forwarding[-1].src='lan' - uci set firewall.@forwarding[-1].family='ipv4' - uci commit firewall - fi -} - -wg_awg_setup "$1"