# DON'T COMPILE THIS FILE
# This file contains common settings for all air conditioners of your house
external_components:
  - source: github://GrKoR/esphome_aux_ac_component
    components: [ aux_ac ]
    refresh: 0s

esphome:
  name: $devicename
  platform: ESP8266
  board: esp12e

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_pass
  manual_ip:
    static_ip: ${wifi_ip}
    gateway: !secret wifi_gateway
    subnet: !secret wifi_subnet
  ap:
    ssid: ${upper_devicename} Hotspot
    password: !secret wifi_ap_pass
  use_address: ${wifi_ota_ip}

captive_portal:
debug:

logger:
    level: DEBUG
    baud_rate: 0
    # set hardware_uart to UART1 and comment out baud_rate above in case of boot crashes
    # it is suitable if you need hardware loggin
    # hardware_uart: UART1

api:
  password: !secret api_pass

ota:
  password: !secret ota_pass

web_server:
  port: 80
  auth:
    username: !secret web_server_user
    password: !secret web_server_password

# UART0 configuration for AUX air conditioner communication
uart:
  id: ac_uart_bus
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 4800
  data_bits: 8
  parity: EVEN
  stop_bits: 1



climate:
  - platform: aux_ac
    name: ${upper_devicename}
    id: aux_id
    uart_id: ac_uart_bus
    period: 7s
    show_action: true
    indoor_temperature:
      name: ${upper_devicename} AC Indoor Temperature
      id: ac_indoor_temp
      internal: true
    visual:
      min_temperature: 16
      max_temperature: 32
      temperature_step: 0.5
    supported_modes:
      - HEAT_COOL
      - COOL
      - HEAT
      - DRY
      - FAN_ONLY
    custom_fan_modes:
      - MUTE
      - TURBO
    supported_presets:
      - SLEEP
    custom_presets:
      - CLEAN
      - FEEL
      - HEALTH
      - ANTIFUNGUS
    supported_swing_modes:
      - VERTICAL
      - HORIZONTAL
      - BOTH


sensor:
  # just wifi signal strength for debug purpose only
  - platform: wifi_signal
    name: ${upper_devicename} WiFi Signal
    update_interval: 30s
    unit_of_measurement: "dBa"
    accuracy_decimals: 0