# DON'T COMPILE THIS FILE
# This file contains common settings for all air conditioners of your house

esphome:
  name: $devicename
  platform: ESP8266
  board: esp12e
  includes:
    - aux_ac_custom_component.h

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_pass
  manual_ip:
    static_ip: ${wifi_ip}
    gateway: !secret wifi_gateway
    subnet: !secret wifi_subnet
  ap:
    ssid: ${upper_devicename} Hotspot
    password: !secret wifi_ap_pass
  use_address: ${wifi_ota_ip}

captive_portal:
debug:

logger:
    level: DEBUG
    baud_rate: 0
    # set hardware_uart to UART1 and comment out baud_rate above in case of boot crashes
    # it is suitable if you need hardware loggin
    # hardware_uart: UART1

api:
  password: !secret api_pass

ota:
  password: !secret ota_pass

web_server:
  port: 80
  auth:
    username: !secret web_server_user
    password: !secret web_server_password

# UART0 configuration for AUX air conditioner communication
uart:
  id: ac_uart_bus
  tx_pin: GPIO1
  rx_pin: GPIO3
  baud_rate: 4800
  data_bits: 8
  parity: EVEN
  stop_bits: 1



climate:
# register custom AC climate
- platform: custom
  lambda: |-
    extern AirCon acAirCon;
    if (!acAirCon.get_initialized()) acAirCon.initAC(id(ac_uart_bus));
    App.register_component(&acAirCon);
    return {&acAirCon};
  climates:
    - name: ${upper_devicename}



sensor:
  # just wifi signal strength for debug purpose only
  - platform: wifi_signal
    name: ${upper_devicename} WiFi Signal
    update_interval: 30s
    unit_of_measurement: "dBa"
    accuracy_decimals: 0

  - platform: custom
    # temperature sensors of AC
    # outdoor temperature currently shows weather on Mars; need more statistics and some smart guys for decoding =)
    # ambient temperature is an air temperature from indor AC unit
    lambda: |-
      extern AirCon acAirCon;
      if (!acAirCon.get_initialized()) acAirCon.initAC(id(ac_uart_bus));
      App.register_component(&acAirCon);
      return {acAirCon.sensor_outdoor_temperature, acAirCon.sensor_ambient_temperature};
    sensors:
    - name: ${upper_devicename} outdoor temperature
      unit_of_measurement: "°C"
      accuracy_decimals: 1
    - name: ${upper_devicename} ambient temperature
      unit_of_measurement: "°C"
      accuracy_decimals: 1



text_sensor:
# firmvare version - version of custom component
- platform: custom
  lambda: |-
    auto aircon_firmware_version = new AirConFirmwareVersion();
    App.register_component(aircon_firmware_version);
    return {aircon_firmware_version};
  text_sensors:
    name: ${upper_devicename} firmware version
    icon: "mdi:chip"