upd: version++, CLIMATE_SCHEMA warning fixed

Esp idf support

.gitignore

@@ -12,6 +12,6 @@
 **/livingroom_ac/
 **/kitchen_ac/
 /examples/*/*.h
-**/tests/test_*
 **/__pycache__
 **/private/
+**/tests

README-EN.md

@@ -36,7 +36,7 @@ The best way to report about your test results is writing a message in the [tele
 For correct component operation, you need hardware and firmware. The hardware description is located [in a separate file](docs/HARDWARE-EN.md).
 
 ### Firmware: Integration aux_ac to your configuration ###
-You need [ESPHome](https://esphome.io) v.1.18.0 or above. `External_components` have appeared in this version. But it is better to use ESPHome v.1.20.4 or above, cause there were a lot of `external_components` errors corrected before this version.
+You need [ESPHome](https://esphome.io) v.2025.2.0 or above. You can try esphome before 2025.2.0 but I can't guarantee error-free compilation of the examples.
 
 ## Installing ##
 1. Declare external component. Read [the manual](https://esphome.io/components/external_components.html?highlight=external) for details.

README.md

@@ -43,7 +43,7 @@ AUX - это один из нескольких OEM-производителей
 Для работы с кондиционером понадобится "железо" и прошивка. Описание электроники вынесено [в отдельный файл](docs/HARDWARE.md).
 
 ### Прошивка: интеграция aux_ac в вашу конфигурацию ESPHome ###
-Для использования требуется [ESPHome](https://esphome.io) версией не ниже 1.18.0. Именно в этой версии появились `external_components`. Но лучше использовать версию 1.20.4 или старше, так как до этой версии массированно исправлялись ошибки в механизме подключения внешних компонентов.<br />
+Для использования требуется [ESPHome](https://esphome.io) версией не ниже 2025.2.0. Работа с более ранними версиями возможна, но не гарантируется.<br />
 
 ## Установка ##
 1. Подключите компонент.

components/aux_ac/aux_ac.h

@@ -4,8 +4,8 @@
 /// немного переработанная версия старого компонента
 #pragma once
 
-#include <Arduino.h>
 #include <stdarg.h>
+#include <cinttypes>
 
 #include "esphome.h"
 #include "esphome/components/binary_sensor/binary_sensor.h"
@@ -16,6 +16,11 @@
 #include "esphome/core/component.h"
 #include "esphome/core/helpers.h"
 
+#ifndef USE_ARDUINO
+using String = std::string;
+#define F(string_literal) (string_literal)
+#endif
+
 // весь функционал сохранения пресетов прячу под дефайн
 //  #define PRESETS_SAVING
 #ifdef PRESETS_SAVING
@@ -710,16 +715,16 @@ namespace esphome
         {
             AC_COMMAND_BASE;
             ac_health_status health_status;
-            float temp_ambient;                      // внутренняя температура
-            int8_t temp_outdoor;                     // внешняя температура
-            int8_t temp_inbound;                     // температура входящая
-            int8_t temp_outbound;                    // температура исходящая
-            int8_t temp_compressor;                  // температура компрессора
-            ac_realFan realFanSpeed;                 // текущая скорость вентилятора
-            uint8_t inverter_power;                  // мощность инвертора
-            bool defrost;                            // режим разморозки внешнего блока (накопление тепла + прогрев испарителя)
-            ac_powLim_state power_lim_state;         // статус ограничения мощности инвертора
-            uint8_t  power_lim_value;                // значение ограничения мощности инвертора
+            float temp_ambient;              // внутренняя температура
+            int8_t temp_outdoor;             // внешняя температура
+            int8_t temp_inbound;             // температура входящая
+            int8_t temp_outbound;            // температура исходящая
+            int8_t temp_compressor;          // температура компрессора
+            ac_realFan realFanSpeed;         // текущая скорость вентилятора
+            uint8_t inverter_power;          // мощность инвертора
+            bool defrost;                    // режим разморозки внешнего блока (накопление тепла + прогрев испарителя)
+            ac_powLim_state power_lim_state; // статус ограничения мощности инвертора
+            uint8_t power_lim_value;         // значение ограничения мощности инвертора
         };
 
         typedef ac_command_t ac_state_t; // текущее состояние параметров кондея можно хранить в таком же формате, как и комманды
@@ -1710,7 +1715,7 @@ namespace esphome
 
                 // заполняем время получения пакета
                 memset(textBuf, 0, 11);
-                sprintf(textBuf, "%010u", packet->msec);
+                sprintf(textBuf, "%010" PRIu32, packet->msec);
                 st = st + textBuf + ": ";
 
                 // формируем преамбулы
@@ -2839,11 +2844,11 @@ namespace esphome
             {
                 ESP_LOGCONFIG(TAG, "AUX HVAC:");
                 ESP_LOGCONFIG(TAG, "  [x] Firmware version: %s", Constants::AC_FIRMWARE_VERSION.c_str());
-                ESP_LOGCONFIG(TAG, "  [x] Period: %dms", this->get_period());
+                ESP_LOGCONFIG(TAG, "  [x] Period: %" PRIu32 "ms", this->get_period());
                 ESP_LOGCONFIG(TAG, "  [x] Show action: %s", TRUEFALSE(this->get_show_action()));
                 ESP_LOGCONFIG(TAG, "  [x] Display inverted: %s", TRUEFALSE(this->get_display_inverted()));
                 ESP_LOGCONFIG(TAG, "  [x] Optimistic: %s", TRUEFALSE(this->get_optimistic()));
-                ESP_LOGCONFIG(TAG, "  [x] Packet timeout: %dms", this->get_packet_timeout());
+                ESP_LOGCONFIG(TAG, "  [x] Packet timeout: %" PRIu32 "ms", this->get_packet_timeout());
 
 #if defined(PRESETS_SAVING)
                 ESP_LOGCONFIG(TAG, "  [x] Save settings %s", TRUEFALSE(this->get_store_settings()));
@@ -3545,7 +3550,7 @@ namespace esphome
             }
 
             // устанавливает ограничение мощности сплита на нужный уровень
-            bool powerLimitationSetSequence(uint8_t power_limit, bool set_on=false)
+            bool powerLimitationSetSequence(uint8_t power_limit, bool set_on = false)
             {
                 // нет смысла в последовательности, если нет коннекта с кондиционером
                 if (!get_has_connection())
@@ -3560,7 +3565,7 @@ namespace esphome
                     return false;
                 }
 
-                if(power_limit != this->_power_limitation_value_normalise(power_limit))
+                if (power_limit != this->_power_limitation_value_normalise(power_limit))
                 {
                     _debugMsg(F("powerLimitationSetSequence: incorrect power limit value."), ESPHOME_LOG_LEVEL_WARN, __LINE__);
                     return false;
@@ -3580,9 +3585,11 @@ namespace esphome
 
                 if (set_on)
                 {
-                   _debugMsg(F("powerLimitationSetSequence: loaded (state = %02X, power limit = %02X)"), ESPHOME_LOG_LEVEL_VERBOSE, __LINE__, cmd.power_lim_state, power_limit);
-                } else {
-                   _debugMsg(F("powerLimitationSetSequence: loaded (power limit = %02X)"), ESPHOME_LOG_LEVEL_VERBOSE, __LINE__, power_limit);
+                    _debugMsg(F("powerLimitationSetSequence: loaded (state = %02X, power limit = %02X)"), ESPHOME_LOG_LEVEL_VERBOSE, __LINE__, cmd.power_lim_state, power_limit);
+                }
+                else
+                {
+                    _debugMsg(F("powerLimitationSetSequence: loaded (power limit = %02X)"), ESPHOME_LOG_LEVEL_VERBOSE, __LINE__, power_limit);
                 }
                 return true;
             }
@@ -3606,10 +3613,13 @@ namespace esphome
                 // формируем команду
                 ac_command_t cmd;
                 _clearCommand(&cmd); // не забываем очищать, а то будет мусор
-                if(enable_limit){
-                   cmd.power_lim_state = AC_POWLIMSTAT_ON; // включить ограничение мощности
-                } else {
-                   cmd.power_lim_state = AC_POWLIMSTAT_OFF; // отключить ограничение мощности
+                if (enable_limit)
+                {
+                    cmd.power_lim_state = AC_POWLIMSTAT_ON; // включить ограничение мощности
+                }
+                else
+                {
+                    cmd.power_lim_state = AC_POWLIMSTAT_OFF; // отключить ограничение мощности
                 }
                 // добавляем команду в последовательность
                 if (!commandSequence(&cmd))
@@ -3622,19 +3632,19 @@ namespace esphome
             // включает ограничение мощности сплита
             bool powerLimitationOnSequence()
             {
-               return powerLimitationOnOffSequence(true);
+                return powerLimitationOnOffSequence(true);
             }
 
             // включает ограничение мощности сплита на нужный уровень
             bool powerLimitationOnSequence(uint8_t power_limit)
             {
-               return powerLimitationSetSequence(power_limit, true);
+                return powerLimitationSetSequence(power_limit, true);
             }
 
             // выключает ограничение мощности сплита
             bool powerLimitationOffSequence()
             {
-               return powerLimitationOnOffSequence(false);
+                return powerLimitationOnOffSequence(false);
             }
 
             // конвертирует состояние жалюзи из кодов сплита в коды для фронтенда

components/aux_ac/climate.py

@@ -33,7 +33,7 @@ from esphome.components.climate import (
     ClimateSwingMode,
 )
 
-AUX_AC_FIRMWARE_VERSION = '0.2.15'
+AUX_AC_FIRMWARE_VERSION = '0.2.17'
 AC_PACKET_TIMEOUT_MIN = 150
 AC_PACKET_TIMEOUT_MAX = 600
 AC_POWER_LIMIT_MIN = 30
@@ -190,7 +190,7 @@ def output_info(config):
 
 
 CONFIG_SCHEMA = cv.All(
-    climate.CLIMATE_SCHEMA.extend(
+    climate.climate_schema(climate.Climate).extend(
         {
             cv.GenerateID(): cv.declare_id(AirCon),
             cv.Optional(CONF_PERIOD, default="7s"): cv.time_period,

docs/AC_TESTED.md

@@ -2,29 +2,44 @@
 `Aux_ac` has been tested and works successfully with the air conditioners from the list below.<br/>
 Кондиционеры из списка ниже протестированы и точно совместимы с `aux_ac`.
 
++ ANDE (models: AND-12/FA+, AND-AMWM-H12(JA) / AND-AM2-H18/4DR3)
 + Argo (models: Greenstyle 9000, Greenstyle 12000, Greenstyle 18000)
-+ AUX (models: ALMD-H48/5DR2 / AL-H48/5DR2(U), AMWM-H07/4R1 multisplit, AMWM-H12/4R3 multisplit, ASM-H12LL, ASM-H24LD, ASW-H07A4/DE-R1DI, ASW-H07A4/FP-R1DI, ASW-H09A4/FP-R1DI, ASW-H12A4/HA-R2DI, ASW-H09A4/LK-700R1, ASW-H09A4/LK-700R1DI, ASW-H12B4/JD-R2DI, ASW-H12A4/FAR1, ASW-H09B4/LK-700R1, ASW-H12C5C4/JOR3DI-B8, ASW-H12U3/JIR1DI-US, AUX-18QC/I / AUX-18QC/O, AWM-09G1V4-X, KFR-26GW/BpHRB+3, KFR-26GW/BpQYA2+2R3, KFR-26GW/BpQYD2+2R3, KFR-26GW/BpR3QYA1+1, KFR-26GW/BpR3QYD1+1, KFR-26GW/BpR3QYQ1+1, KFR-26GW/BpR3QYQ2+2, KFR-35GW/BpQYA1+1R3, KFR-35GW/BpQYA2+2R3, KFR-35GW/BpQYD1+1R3, KFR-35GW/BpQYD2+2R3, KFR-35GW/BpR3QYQ1+1, KFR-35GW/BpR3QYQ2+2 (see [issue #71](https://github.com/GrKoR/esphome_aux_ac_component/issues/71) for detais of `Aegean Sea`[爱琴海] AUX family AC connection)
-+ Ballu (models: BLC_CF-60HN1, BSUI-09HN8, BSUI-12HN8, BSUI-18HN8, BSW-09HN1, BSW-12HN1)
-+ Centek (models: CT-65A12, CT-65EDC07, CT-65F09, CT-65F12, CT-65FDC09, CT-65J09, CT-65J12, CT-65Q09, CT-65Q12, CT-65U13, CT-65V24, CT-65Z10, CT-65Z18)
++ Arielli (models: ASW-H09B4/FGR3DI-EU)
++ AUX (models: ALLD-H18/4R1C / AL-H18/4R1C(U), ALMD-H48/5DR2 / AL-H48/5DR2(U), ALMD-H24/4DR2A / AL-H24/4DR2A(U), AMWM-H07/4R1 multisplit, AMWM-H07/4R2(J) multisplit, AMWM-H12/4R2(J) multisplit, AMWM-H12/4R3 multisplit, ASM-H12LL, ASM-H24LD, ASW-12A3INV/SS, ASW-H07A4/DE-R1DI, ASW-H07A4/FP-R1DI, ASW-H07A4/JD-R1, ASW-H09A4/FP-R1DI, ASW-H09A4/LK-700R1, ASW-H09A4/LK-700R1DI, ASW-H09B4/LK-700R1, ASW-H09B7A4, ASW-H12A4/FAR1, ASW-H12A4/HA-R2DI, ASW-H12A4/JD-R2DI, ASW-H12B4/JD-R2DI, ASW-H12C5C4/JER3DI-B8-2, ASW-H12C5C4/JOR3DI-B8, ASW-H12U3/JIR1DI-US, ASW-H18A4/QH-R1DI / AS-H18A4/QH-R1DI, ASW-H18E3A4, AUX-07JO/I / AUX-M3-21LCLH multisplit, AUX-09CAA/I / ASW-H09A4/CAR3DI-C3, AUX-12JO/I / AUX-M3-21LCLH multisplit, AUX-12F3H, AUX-18QC/I / AUX-18QC/O, AWM-09G1V4-X, HA-18000BTU, KFR-26GW/BpHRB+3, KFR-26GW/BpQYA2+2R3, KFR-26GW/BpQYD2+2R3, KFR-26GW/BpR3QYA1+1, KFR-26GW/BpR3QYD1+1, KFR-26GW/BpR3QYQ1+1, KFR-26GW/BpR3QYQ2+2, KFR-35GW/BpQYA1+1R3, KFR-35GW/BpQYA2+2R3, KFR-35GW/BpQYD1+1R3, KFR-35GW/BpQYD2+2R3, KFR-35GW/BpR3QYQ1+1, KFR-35GW/BpR3QYQ2+2 (see [issue #71](https://github.com/GrKoR/esphome_aux_ac_component/issues/71) for detais of `Aegean Sea`[爱琴海] AUX family AC connection)
++ Ballu (models: BLC_CF/in-60HN1 / BLC_O/out-60HN1, Orbis BPAC-08 OR/N6, BSUI/in-09HN8 / BSUI/out-09HN8, BSUI/in-12HN8 / BSUI/out-12HN8, BSUI/in-18HN8 / BSUI/out-18HN8, BSW/in-09HN1 / BSW/out-09HN1, BSW/in-12HN1 / BSW/out-12HN1, BSW/in-18HN1 / BSW/out-18HN1)
++ Baymak (models: Elegant Plus 9, Elegant Plus 12)
++ Centek (models: CT-65A09, CT-65A12, CT-65EDC07, CT-65F09, CT-65F12, CT-65FDC07, CT-65FDC09, CT-65J09, CT-65J12, CT-65J24, CT-65K07, CT-65Q09, CT-65Q12, CT-65RDC07, CT-65RDC09, CT-65RDC12, CT-65SDC07, CT-65SDC09, CT-65SDC18, CT-65U13, CT-65U18, CT-65V12, CT-65V24, CT-65X12, CT-65Z10, CT-65Z18)
++ Costway (models: FP10318US-22WH, FP10524US-22WH)
 + Dimstal (model: SMND-QC-12-J-Smart ECO)
-+ Elgin (models: HWFI09B2IA/ HWFE09B2NA)
-+ Energolux (models: SAS07L2-A, SAS07L4-A, SAS07M2-AI, SAS09B3-A, SAS09L4-A, SAS09Z4-AI, SAS12BN1-AI, SAS12CH1-AI, SAS12Z3-AI)
++ Electrolux (models: EACS/I-07HSK/N3, EACS/I-09HIX-BLACK/N8)
++ Elgin (models: HIFI09C2WA / HIFE09C2CA, HJFI12C2WB, HWFI09B2IA / HWFE09B2NA)
++ Energolux (models: SAS07L2-A, SAS07L4-A, SAS07M2-AI, SAS09B3-A, SAS09L4-A, SAS09Z4-AI, SAS12BN1-AI, SAS09Z4-AI, SAS18Z4-AI)
++ Fujico (models: ACF-I07AHRDN1)
 + Hyundai (models: H-AR16-07H, H-AR21-07H, H-AR21-09H)
 + iClima (models: ICI-09A/IUI-09A)
 + Idea (models: ISR-12HR-SA7-DN1 ION)
-+ IGC (models: RAK-07NH multysplit, RAS-07AX/RAC-07AX, RAS-V09N2X/RAC-V09N2X)
-+ Ishimatsu (models: AVK-09I)
++ IGC (models: RAK-07NH multysplit, RAS-07AX/RAC-07AX, RAS-V09N2X/RAC-V09N2X, RAS-V12NQR/RAC-V12NQR)
++ IKON (models: ASW-H12C5C4/HCR3DI-B8)
++ Ishimatsu (models: AVK-07I, AVK-09I)
 + Loriot (models: LAC-09AS)
 + Mirage (models: EWC121E - CWC121E)
++ Osaka (models: STVP-12HH3)
 + RCool (models: GRA12B0-KSZKLM641)
++ Rinnai (models: RINV25RC)
 + Roda (models: RS-AL09F, RS-AL24F)
 + Rovex (models: RS-07ALS1, RS-09ALS1, RS-12ALS1)
-+ Royal Clima (models: CO-D 18HNI/CO-E 18HNI, RC-VNR29HN, RCI-SA30HN)
++ Royal Clima (models: CO-D 18HNI/CO-E 18HNI, CO-D 24HNI/CO-E 24HNI, RC-VNR29HN, RC-RNC28HN, RCI-SA30HN)
++ RVX (models: RS-12ALS)
 + Samurai (models: SMA-07HRN1 ION, SMA-09HRN1 ION)
-+ Subtropic (models: SUB-07HN1, SUB-09HN1, SUB-12HN1)
++ Scarlett	(models: RRI-09-MPI)
++ SEVRA (models: SEV-09JO)
++ Subtropic (models: SUB/in-07HN1 / SUB/out-07HN1, SUB/in-09HN1 / SUB/out-09HN1, SUB/in-12HN1 / SUB/out-12HN1)
 + Tesla (models: TA35FFML-12410M)
++ Tornado (models: ISKA-INV-12 X WIFI EU)
 + TOYOTOMI (models: SONZAI THN/THG-A35SZ)
-+ VOX (models: IVA5-12JR1, IJO09-SC4D)
++ Vertex (models: Falcon-18A)
++ VORTEX (models: VAI-A 1219F JMRV)
++ VOX (models: IJO09-SC4D, IVA5-12JR1)
 + Xigma (models: XG-SJ56RHA-IDU)
 + Zephir (models: ZEL 12000BTU)
 + Бирюса (models: B-07DPR/B-07DPQ, B-09FIR/B-09FIQ)

examples/advanced/ac_common.yaml

@@ -7,7 +7,8 @@ external_components:
 
 esphome:
   name: $devicename
-  platform: ESP8266
+
+esp8266:
   board: esp12e
 
 wifi:
@@ -36,7 +37,8 @@ api:
   password: !secret api_pass
 
 ota:
-  password: !secret ota_pass
+  - platform: esphome
+    password: !secret ota_pass
 
 web_server:
   port: 80

examples/simple/aux_ac_simple.yaml

@@ -5,7 +5,8 @@ external_components:
 
 esphome:
   name: aux_air_conditioner
-  platform: ESP8266
+
+esp8266:
   board: esp12e
 
 # don't forget to set your's wifi settings!
@@ -30,6 +31,7 @@ logger:
 api:
 
 ota:
+  - platform: esphome
 
 # UART0 configuration for AUX air conditioner communication
 uart:

tests/.gitignore

@@ -1,10 +0,0 @@
-# Gitignore settings for ESPHome
-# This is an example and may include too much for your use-case.
-# You can modify this file to suit your needs.
-/.esphome/
-**/.pioenvs/
-**/.piolibdeps/
-**/lib/
-**/src/
-**/platformio.ini
-/secrets.yaml

tests/ac_send_packet_for_engineer.py

@@ -1,191 +0,0 @@
-import time
-import aioesphomeapi
-import asyncio
-import re
-import sys
-import argparse
-from aioesphomeapi.api_pb2 import (LOG_LEVEL_NONE,
-                                   LOG_LEVEL_ERROR,
-                                   LOG_LEVEL_WARN,
-                                   LOG_LEVEL_INFO,
-                                   LOG_LEVEL_DEBUG,
-                                   LOG_LEVEL_VERBOSE,
-                                   LOG_LEVEL_VERY_VERBOSE)
-
-def createParser ():
-    parser = argparse.ArgumentParser(
-        description='''This script is used for collecting logs from ac_aux ESPHome component.
-                       For more info, see https://github.com/GrKoR/ac_python_logger''',
-        add_help = False)
-    parent_group = parser.add_argument_group (title='Params')
-    parent_group.add_argument ('--help', '-h', action='help', help='show this help message and exit')
-    parent_group.add_argument ('-i', '--ip', nargs=1, required=True, help='IP address of the esphome device')
-    parent_group.add_argument ('-p', '--pwd', nargs=1, required=True, help='native API password for the esphome device')
-    return parser
-
-async def main():
-    """Connect to an ESPHome device and wait for state changes."""
-    api = aioesphomeapi.APIClient(namespace.ip[0], 6053, namespace.pwd[0])
-
-    try:
-        await api.connect(login=True)
-    except aioesphomeapi.InvalidAuthAPIError as e:
-        return print(e)
-
-    print(api.api_version)
-
-    async def display_off():
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x01, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x00],
-            }
-        )
-
-    async def display_on():
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x01, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-            }
-        )
-
-    async def ac_enable():
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x00, 0x87, 0xE0, 0x2F, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-            }
-        )
-
-    async def ac_disable():
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x00, 0x87, 0xE0, 0x2F, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00],
-            }
-        )
-
-    async def ac_get11_01():
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x02, 0x00, 0x11, 0x01],
-            }
-        )
-
-    async def ac_get11_00():
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x02, 0x00, 0x11, 0x00],
-            }
-        )
-
-    async def ac_set_vlouver(lvr):
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01,  lvr, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-            }
-        )
-
-    async def ac_set_hlouver(lvr):
-        await api.execute_service(
-            service,
-            data={
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97,  lvr, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-            }
-        )
-
-    # key надо искать в выводе list_entities_services
-    service = aioesphomeapi.UserService(
-        name="send_data",
-        key=311254518,
-        args=[
-            aioesphomeapi.UserServiceArg(name="data_buf", type=aioesphomeapi.UserServiceArgType.INT_ARRAY),
-        ],
-    )
-
-    time.sleep(7)
-    await ac_get11_00()
-    time.sleep(7)
-    await ac_get11_01()
-
-    #await ac_set_vlouver( 0b10010000 )  # swing on
-    #await ac_set_vlouver( 0b10010111 )   # swing off
-    #await ac_set_vlouver( 0b10010001 )   #  1
-    #await ac_set_vlouver( 0b10010010 )   #   2
-    #await ac_set_vlouver( 0b10010011 )   #   3
-    #await ac_set_vlouver( 0b10010100 )   #   4
-    #await ac_set_vlouver( 0b10010101 )   #   5
-    #await ac_set_vlouver( 0b10010110 )   # не работает, сбрасывает на swing on
-    #time.sleep(5)
-
-    #await ac_set_hlouver( 0b00000000 )  # swing on
-    #await ac_set_hlouver( 0b11100000 )   # swing off
-    #await ac_set_hlouver( 0b00100000 )   # не работает, сбрасывает в swing off
-    #await ac_set_hlouver( 0b01000000 )   # не работает, сбрасывает в swing off
-    #await ac_set_hlouver( 0b01100000 )   # не работает, сбрасывает в swing off
-    #await ac_set_hlouver( 0b10000000 )   # не работает, сбрасывает в swing off
-    #await ac_set_hlouver( 0b10100000 )   # не работает, сбрасывает в swing off
-    #await ac_set_hlouver( 0b11000000 )   # не работает, сбрасывает в swing off
-    #time.sleep(5)
-
-    async def test_byte(bt):
-        await api.execute_service(
-            service,
-            data={
-                #display on
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                #"data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-                #display off
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x00],
-                # swing on
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                #"data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01,  0x90, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-                # swing off
-                #               0     1     2     3     4     5     6     7     8     9    10    11    12    13    14    15    16    17    18    19    20    21    22
-                #"data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01,  0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
-            }
-        )
-    '''
-    не проходит команда, если байт 1 или 7 не 0x00
-    не проходит команда, если байт 3 не 0x80
-
-    проходит и не меняется, если меняю байт 4 или 5
-    '''
-
-    #await test_byte(0b10000110)
-    #await test_byte(0b01000110)
-    #await test_byte(0b00100110)
-    #await test_byte(0b00010110)
-    time.sleep(2)
-
-
-parser = createParser()
-namespace = parser.parse_args()
-print("IP: ", namespace.ip[0])
-
-
-loop = asyncio.get_event_loop()
-try:
-    #asyncio.ensure_future(main())
-    #loop.run_forever()
-    loop.run_until_complete(main())
-except aioesphomeapi.InvalidAuthAPIError as e:
-    print(e)
-except KeyboardInterrupt:
-    pass
-finally:
-    loop.close()
-    pass

tests/test-ext-esp32.yaml

@@ -1,121 +0,0 @@
-external_components:
-  - source: github://GrKoR/esphome_aux_ac_component@dev
-    components: [ aux_ac ]
-    refresh: 0s
-
-substitutions:
-  devicename: test_aux_ac_ext_esp32
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP32
-  board: nodemcu-32s
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: 192.168.0.151    # Для примера
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: Test AUX Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-
-ota: 
-  password: !secret ota_pass
-
-uart:
-  id: ac_uart_bus
-  #tx_pin: GPIO1
-  #rx_pin: GPIO3
-  tx_pin: TX
-  rx_pin: RX
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-    indoor_temperature:
-      name: $upper_devicename Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false
-    display_state:
-      name: $upper_devicename Display State
-      id: ${devicename}_display_state
-      internal: false
-    outdoor_temperature:
-      name: $upper_devicename Outdoor Temperature
-      id: ${devicename}_outdoor_temp
-      internal: false
-    outbound_temperature:
-      name: $upper_devicename Coolant Outbound Temperature
-      id: ${devicename}_outbound_temp
-      internal: false
-    inbound_temperature:
-      name: $upper_devicename Coolant Inbound Temperature
-      id: ${devicename}_inbound_temp
-      internal: false
-    compressor_temperature:
-      name: $upper_devicename Compressor Temperature
-      id: ${devicename}_strange_temp
-      internal: false
-    defrost_state:
-      name: $upper_devicename Defrost State
-      id: ${devicename}_defrost_state
-      internal: false
-    inverter_power:
-      name: $upper_devicename Invertor Power
-      id: ${devicename}_invertor_power
-      internal: false
-    preset_reporter:
-      name: $upper_devicename Preset Reporter
-      id: ${devicename}_preset_reporter
-      internal: false
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH

tests/test-ext-for-engineer.yaml

@@ -1,156 +0,0 @@
-external_components:
-  - source: github://GrKoR/esphome_aux_ac_component@dev
-    components: [ aux_ac ]
-    refresh: 0s
-
-substitutions:
-  devicename: test_aux_ac_ext_engeneer
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: !secret wifi_ip
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: Test AUX Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-  services:
-    # этот сервис можно вызвать из Home Assistant или Python. Он отправляет полученные байты в кондиционер
-    - service: send_data
-      variables: 
-        data_buf: int[]
-      then:
-        # ВАЖНО! Только для инженеров!
-        # Вызывайте метод aux_ac.send_packet только если понимаете, что делаете! Он не проверяет данные, а передаёт
-        # кондиционеру всё как есть. Какой эффект получится от передачи кондиционеру рандомных байт, никто не знает.
-        # Вы действуете на свой страх и риск.
-        - aux_ac.send_packet:
-            id: aux_id
-            data: !lambda |-
-              std::vector<uint8_t> data{};
-              for (int n : data_buf) {
-                data.push_back( (uint8_t) n );
-              }
-              return data;
-
-ota: 
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-    optimistic: true
-    indoor_temperature:
-      name: $upper_devicename Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false
-    display_state:
-      name: $upper_devicename Display State
-      id: ${devicename}_display_state
-      internal: false
-    outdoor_temperature:
-      name: $upper_devicename Outdoor Temperature
-      id: ${devicename}_outdoor_temp
-      internal: false
-    outbound_temperature:
-      name: $upper_devicename Coolant Outbound Temperature
-      id: ${devicename}_outbound_temp
-      internal: false
-    inbound_temperature:
-      name: $upper_devicename Coolant Inbound Temperature
-      id: ${devicename}_inbound_temp
-      internal: false
-    compressor_temperature:
-      name: $upper_devicename Compressor Temperature
-      id: ${devicename}_strange_temp
-      internal: false
-    defrost_state:
-      name: $upper_devicename Defrost State
-      id: ${devicename}_defrost_state
-      internal: false
-    inverter_power:
-      name: $upper_devicename Invertor Power
-      id: ${devicename}_invertor_power
-      internal: false
-    preset_reporter:
-      name: $upper_devicename Preset Reporter
-      id: ${devicename}_preset_reporter
-      internal: false
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH
-
-
-switch:
-  - platform: template
-    name: AC Display
-    lambda: |-
-      if (id(${devicename}_display_state).state) {
-        return true;
-      } else {
-        return false;
-      }
-    turn_on_action:
-      - aux_ac.display_on: aux_id
-    turn_off_action:
-      - aux_ac.display_off: aux_id

tests/test-ext-power-limit.yaml

@@ -1,162 +0,0 @@
-external_components:
-  - source: github://GrKoR/esphome_aux_ac_component@dev
-    components: [ aux_ac ]
-    refresh: 0s
-
-substitutions:
-  devicename: test_ext_power_limitations
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: !secret wifi_ip
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: Test AUX Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-
-ota: 
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-    timeout: 150
-    indoor_temperature:
-      name: $upper_devicename Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false
-    display_state:
-      name: $upper_devicename Display State
-      id: ${devicename}_display_state
-      internal: false
-    outdoor_temperature:
-      name: $upper_devicename Outdoor Temperature
-      id: ${devicename}_outdoor_temp
-      internal: false
-    outbound_temperature:
-      name: $upper_devicename Coolant Outbound Temperature
-      id: ${devicename}_outbound_temp
-      internal: false
-    inbound_temperature:
-      name: $upper_devicename Coolant Inbound Temperature
-      id: ${devicename}_inbound_temp
-      internal: false
-    compressor_temperature:
-      name: $upper_devicename Compressor Temperature
-      id: ${devicename}_strange_temp
-      internal: false
-    defrost_state:
-      name: $upper_devicename Defrost State
-      id: ${devicename}_defrost_state
-      internal: false
-    inverter_power:
-      name: $upper_devicename Inverter Power
-      id: ${devicename}_invertor_power
-      internal: false
-    preset_reporter:
-      name: $upper_devicename Preset Reporter
-      id: ${devicename}_preset_reporter
-      internal: false
-    inverter_power_limit_value:
-      name: $upper_devicename Inverter Power Limit Value
-      id: ${devicename}_inverter_power_limit_value
-      internal: false
-    inverter_power_limit_state:
-      name: $upper_devicename Inverter Power Limit State
-      id: ${devicename}_inverter_power_limit_state
-      internal: false
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH
-
-
-button:
-  - platform: template
-    name: ${upper_devicename} IPower Limit Off
-    icon: "mdi:power-plug-off-outline"
-    on_press:
-      - aux_ac.power_limit_off: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} IPower Limit On Half
-    icon: "mdi:fraction-one-half"
-    on_press:
-      - aux_ac.power_limit_on:
-          id: aux_id
-          limit: 50
-          
-number:
-  - platform: template
-    name: ${upper_devicename} IPower Limit Value
-    id: ${devicename}_ipower_limit_value
-    icon: "mdi:battery-unknown"
-    mode: "slider"
-    min_value: 30
-    max_value: 100
-    step: 1
-    set_action:
-      then:
-        - lambda: !lambda |-
-            id(aux_id).powerLimitationOnSequence( x );
-

tests/test-local-airflow-dir.yaml

@@ -1,125 +0,0 @@
-external_components:
-  - source:
-      type: local
-      path: ../components
-
-substitutions:
-  devicename: test_local_airflow_dir
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: !secret wifi_ip
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: $upper_devicename Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-
-ota: 
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-  
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-
-
-button:
-  - platform: template
-    name: ${upper_devicename} VLouver Stop
-    icon: "mdi:circle-small"
-    on_press:
-      - aux_ac.vlouver_stop: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} VLouver Swing
-    icon: "mdi:pan-vertical"
-    on_press:
-      - aux_ac.vlouver_swing: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} VLouver Top
-    icon: "mdi:pan-up"
-    on_press:
-      - aux_ac.vlouver_top: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} VLouver Middle Above
-    icon: "mdi:pan-top-left"
-    on_press:
-      - aux_ac.vlouver_middle_above: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} VLouver Middle
-    icon: "mdi:pan-left"
-    on_press:
-      - aux_ac.vlouver_middle: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} VLouver Middle Below
-    icon: "mdi:pan-bottom-left"
-    on_press:
-      - aux_ac.vlouver_middle_below: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} VLouver Bottom
-    icon: "mdi:pan-down"
-    on_press:
-      - aux_ac.vlouver_bottom: aux_id
-
-
-number:
-  - platform: template
-    name: ${upper_devicename} Vertical Louver
-    id: ${devicename}_vlouver
-    icon: "mdi:circle-small"
-    mode: "slider"
-    min_value: 0
-    max_value: 6
-    step: 1
-    set_action:
-      then:
-        - lambda: !lambda |-
-            if (x == 6) x = 7;  // делаем так, чтобы выключение отрабатывать корректно
-            id(aux_id).setVLouverSequence( static_cast<esphome::aux_ac::ac_louver_V>(x) );

tests/test-local-power-limit.yaml

@@ -1,162 +0,0 @@
-external_components:
-  - source:
-      type: local
-      path: ../components
-
-substitutions:
-  devicename: test_local_power_limitations
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: !secret wifi_ip
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: Test AUX Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-
-ota: 
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-    timeout: 150
-    indoor_temperature:
-      name: $upper_devicename Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false
-    display_state:
-      name: $upper_devicename Display State
-      id: ${devicename}_display_state
-      internal: false
-    outdoor_temperature:
-      name: $upper_devicename Outdoor Temperature
-      id: ${devicename}_outdoor_temp
-      internal: false
-    outbound_temperature:
-      name: $upper_devicename Coolant Outbound Temperature
-      id: ${devicename}_outbound_temp
-      internal: false
-    inbound_temperature:
-      name: $upper_devicename Coolant Inbound Temperature
-      id: ${devicename}_inbound_temp
-      internal: false
-    compressor_temperature:
-      name: $upper_devicename Compressor Temperature
-      id: ${devicename}_strange_temp
-      internal: false
-    defrost_state:
-      name: $upper_devicename Defrost State
-      id: ${devicename}_defrost_state
-      internal: false
-    inverter_power:
-      name: $upper_devicename Inverter Power
-      id: ${devicename}_invertor_power
-      internal: false
-    preset_reporter:
-      name: $upper_devicename Preset Reporter
-      id: ${devicename}_preset_reporter
-      internal: false
-    inverter_power_limit_value:
-      name: $upper_devicename Inverter Power Limit Value
-      id: ${devicename}_inverter_power_limit_value
-      internal: false
-    inverter_power_limit_state:
-      name: $upper_devicename Inverter Power Limit State
-      id: ${devicename}_inverter_power_limit_state
-      internal: false
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH
-
-
-button:
-  - platform: template
-    name: ${upper_devicename} IPower Limit Off
-    icon: "mdi:power-plug-off-outline"
-    on_press:
-      - aux_ac.power_limit_off: aux_id
-    
-  - platform: template
-    name: ${upper_devicename} IPower Limit On Half
-    icon: "mdi:fraction-one-half"
-    on_press:
-      - aux_ac.power_limit_on:
-          id: aux_id
-          limit: 50
-          
-number:
-  - platform: template
-    name: ${upper_devicename} IPower Limit Value
-    id: ${devicename}_ipower_limit_value
-    icon: "mdi:battery-unknown"
-    mode: "slider"
-    min_value: 30
-    max_value: 100
-    step: 1
-    set_action:
-      then:
-        - lambda: !lambda |-
-            id(aux_id).powerLimitationOnSequence( x );
-

tests/test-local.yaml

@@ -1,123 +0,0 @@
-external_components:
-  - source:
-      type: local
-      path: ../components
-
-substitutions:
-  devicename: test_local_airflow_dir
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: !secret wifi_ip
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: Test AUX Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-
-ota: 
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-sensor:
-  - platform: uptime
-    name: Uptime Sensor
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-    optimistic: true
-    indoor_temperature:
-      name: $upper_devicename Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false
-    display_state:
-      name: $upper_devicename Display State
-      id: ${devicename}_display_state
-      internal: false
-    outdoor_temperature:
-      name: $upper_devicename Outdoor Temperature
-      id: ${devicename}_outdoor_temp
-      internal: false
-    outbound_temperature:
-      name: $upper_devicename Coolant Outbound Temperature
-      id: ${devicename}_outbound_temp
-      internal: false
-    inbound_temperature:
-      name: $upper_devicename Coolant Inbound Temperature
-      id: ${devicename}_inbound_temp
-      internal: false
-    compressor_temperature:
-      name: $upper_devicename Compressor Temperature
-      id: ${devicename}_strange_temp
-      internal: false
-    defrost_state:
-      name: $upper_devicename Defrost State
-      id: ${devicename}_defrost_state
-      internal: false
-    inverter_power:
-      name: $upper_devicename Invertor Power
-      id: ${devicename}_invertor_power
-      internal: false
-    preset_reporter:
-      name: $upper_devicename Preset Reporter
-      id: ${devicename}_preset_reporter
-      internal: false
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH

tests/test-minimal.yaml

@@ -1,48 +0,0 @@
-external_components:
-  - source:
-      type: local
-      path: ../components
-  #- source: github://GrKoR/esphome_aux_ac_component@dev
-    #components: [ aux_ac ]
-    #refresh: 0s
-
-substitutions:
-  devicename: test_local_minimal
-  upper_devicename: Test AUX
-  
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  reboot_timeout: 0s
-  ap:
-    ssid: $upper_devicename Fallback Hotspot
-    password: !secret wifi_ap_pass
-
-logger:
-  level: DEBUG
-  baud_rate: 0
-
-api:
-  password: !secret api_pass
-  reboot_timeout: 0s
-
-ota: 
-  password: !secret ota_pass
-
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-climate:
-  - platform: aux_ac
-    name: $upper_devicename