From a9e6171280112ef69556d5303c2de1713f32c17b Mon Sep 17 00:00:00 2001
From: GrKoR <dr.g.kornev@gmail.com>
Date: Fri, 29 Oct 2021 19:53:59 +0300
Subject: [PATCH] ext & local test.yaml + minor changes

---
 .gitignore                           |  1 +
 components/aux_ac/aux_ac.h           | 26 ++++------
 tests/test-ext.yaml                  | 78 ++++++++++++++++++++++++++++
 tests/{test.yaml => test-local.yaml} |  2 +-
 4 files changed, 90 insertions(+), 17 deletions(-)
 create mode 100644 tests/test-ext.yaml
 rename tests/{test.yaml => test-local.yaml} (98%)

diff --git a/.gitignore b/.gitignore
index e159238..1679ca7 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,6 +1,7 @@
 # Gitignore settings for ESPHome
 # This is an example and may include too much for your use-case.
 # You can modify this file to suit your needs.
+**/.vscode/
 **/.esphome/
 **/.pioenvs/
 **/.piolibdeps/
diff --git a/components/aux_ac/aux_ac.h b/components/aux_ac/aux_ac.h
index ab7f9b8..1ee8df0 100644
--- a/components/aux_ac/aux_ac.h
+++ b/components/aux_ac/aux_ac.h
@@ -2284,6 +2284,13 @@ class AirCon : public esphome::Component, public esphome::climate::Climate {
         };
 
         void loop() override {
+            if ((millis()-_dataMillis) > 3000){
+                _dataMillis = millis();
+                _debugMsg(F("current status:"), ESPHOME_LOG_LEVEL_DEBUG, __LINE__);
+                _debugMsg(F("   _hw_initialized = %02X"), ESPHOME_LOG_LEVEL_DEBUG, __LINE__, this->_hw_initialized);
+                _debugMsg(F("   _has_connection = %02X"), ESPHOME_LOG_LEVEL_DEBUG, __LINE__, this->_has_connection);
+            }
+
             if (!get_hw_initialized()) return;
 
             /// отрабатываем состояния конечного автомата
@@ -2313,6 +2320,9 @@ class AirCon : public esphome::Component, public esphome::climate::Climate {
             if ((millis()-_dataMillis) > _update_period){
                 _dataMillis = millis();
 
+                _debugMsg(F("update period:"), ESPHOME_LOG_LEVEL_DEBUG, __LINE__);
+                _debugMsg(F("   _hw_initialized = %02X)"), ESPHOME_LOG_LEVEL_DEBUG, __LINE__, this->_hw_initialized);
+                _debugMsg(F("   _has_connection = %02X)"), ESPHOME_LOG_LEVEL_DEBUG, __LINE__, this->_has_connection);
                 // обычный wifi-модуль запрашивает маленький пакет статуса
                 // но нам никто не мешает запрашивать и большой и маленький, чтобы чаще обновлять комнатную температуру
                 // делаем этот запросом только в случае, если есть коннект с кондиционером
@@ -2321,21 +2331,5 @@ class AirCon : public esphome::Component, public esphome::climate::Climate {
         };
 };
 
-//AirCon acAirCon;
-
-/*
-class AirConFirmwareVersion: public esphome::PollingComponent, public esphome::text_sensor::TextSensor {
-    public:
-        AirConFirmwareVersion() :  PollingComponent(1*60*1000) {}   // 1 minute update interval
-
-        void setup() override {
-        }
-
-        void update() override {
-            publish_state(Constants::AC_ROVEX_FIRMWARE_VERSION);
-        }
-};
-*/
-
 } // namespace aux_ac
 } // namespace esphome
\ No newline at end of file
diff --git a/tests/test-ext.yaml b/tests/test-ext.yaml
new file mode 100644
index 0000000..c6cacf2
--- /dev/null
+++ b/tests/test-ext.yaml
@@ -0,0 +1,78 @@
+external_components:
+  - source: github://GrKoR/esphome_aux_ac_component@dev
+    components: [ aux_ac ]
+
+esphome:
+  name: test_aux_ac_local
+  platform: ESP8266
+  board: esp12e
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_pass
+  manual_ip:
+    static_ip: !secret wifi_ip
+    gateway: !secret wifi_gateway
+    subnet: !secret wifi_subnet
+    dns1: 8.8.8.8
+    dns2: 1.1.1.1
+  reboot_timeout: 0s
+  ap:
+    ssid: Test AUX Fallback Hotspot
+    password: !secret wifi_ap_pass
+
+logger:
+  level: DEBUG
+  baud_rate: 0
+
+api:
+  password: !secret api_pass
+  reboot_timeout: 0s
+
+ota: 
+  password: !secret ota_pass
+
+uart:
+  id: ac_uart_bus
+  tx_pin: GPIO1
+  rx_pin: GPIO3
+  baud_rate: 4800
+  data_bits: 8
+  parity: EVEN
+  stop_bits: 1
+
+sensor:
+  - platform: uptime
+    name: Uptime Sensor
+
+climate:
+  - platform: aux_ac
+    name: "AC Name"
+    id: aux_id
+    uart_id: ac_uart_bus
+    period: 7s            # период опроса состояния сплита, по дефолту 7 сек
+    show_action: true     # надо ли показывать текущий режим работы: при HEAT_COOL mode сплит может греть (HEAT), охлаждать (COOL) или бездействовать (IDLE)
+    visual:
+      min_temperature: 16
+      max_temperature: 32
+      temperature_step: 0.5
+    supported_modes:
+      - HEAT_COOL   # не AUTO, так как только нагревает и остужает. В доках на ESPHome говорится, что AUTO - это если у устройства есть календарь и какие-то установки по расписанию.
+      - COOL
+      - HEAT
+      - DRY
+      - FAN_ONLY
+    custom_fan_modes:
+      - MUTE
+      - TURBO
+    supported_presets:
+      - SLEEP
+    custom_presets:
+      - CLEAN
+      - FEEL
+      - HEALTH
+      - ANTIFUNGUS
+    supported_swing_modes:
+      - VERTICAL
+      - HORIZONTAL
+      - BOTH
\ No newline at end of file
diff --git a/tests/test.yaml b/tests/test-local.yaml
similarity index 98%
rename from tests/test.yaml
rename to tests/test-local.yaml
index 8204a02..c012c44 100644
--- a/tests/test.yaml
+++ b/tests/test-local.yaml
@@ -4,7 +4,7 @@ external_components:
       path: ..\components
 
 esphome:
-  name: test_aux_ac
+  name: test_aux_ac_local
   platform: ESP8266
   board: esp12e