diff --git a/.gitignore b/.gitignore
index 66c9f45..a323ac9 100644
--- a/.gitignore
+++ b/.gitignore
@@ -12,6 +12,5 @@
**/livingroom_ac/
**/kitchen_ac/
/examples/*/*.h
-**/tests/test_*
**/__pycache__
**/private/
\ No newline at end of file
diff --git a/README-EN.md b/README-EN.md
index b8177f5..b328bbc 100644
--- a/README-EN.md
+++ b/README-EN.md
@@ -36,7 +36,7 @@ The best way to report about your test results is writing a message in the [tele
For correct component operation, you need hardware and firmware. The hardware description is located [in a separate file](docs/HARDWARE-EN.md).
### Firmware: Integration aux_ac to your configuration ###
-You need [ESPHome](https://esphome.io) v.1.18.0 or above. `External_components` have appeared in this version. But it is better to use ESPHome v.1.20.4 or above, cause there were a lot of `external_components` errors corrected before this version.
+You need [ESPHome](https://esphome.io) v.2025.2.0 or above. You can try esphome before 2025.2.0 but I can't guarantee error-free compilation of the examples.
## Installing ##
1. Declare external component. Read [the manual](https://esphome.io/components/external_components.html?highlight=external) for details.
diff --git a/README.md b/README.md
index dfa322a..3f93387 100644
--- a/README.md
+++ b/README.md
@@ -43,7 +43,7 @@ AUX - это один из нескольких OEM-производителей
Для работы с кондиционером понадобится "железо" и прошивка. Описание электроники вынесено [в отдельный файл](docs/HARDWARE.md).
### Прошивка: интеграция aux_ac в вашу конфигурацию ESPHome ###
-Для использования требуется [ESPHome](https://esphome.io) версией не ниже 1.18.0. Именно в этой версии появились `external_components`. Но лучше использовать версию 1.20.4 или старше, так как до этой версии массированно исправлялись ошибки в механизме подключения внешних компонентов.
+Для использования требуется [ESPHome](https://esphome.io) версией не ниже 2025.2.0. Работа с более ранними версиями возможна, но не гарантируется.
## Установка ##
1. Подключите компонент.
diff --git a/examples/advanced/ac_common.yaml b/examples/advanced/ac_common.yaml
index 3edc6b9..060be4e 100644
--- a/examples/advanced/ac_common.yaml
+++ b/examples/advanced/ac_common.yaml
@@ -7,7 +7,8 @@ external_components:
esphome:
name: $devicename
- platform: ESP8266
+
+esp8266:
board: esp12e
wifi:
diff --git a/examples/simple/aux_ac_simple.yaml b/examples/simple/aux_ac_simple.yaml
index 63ce5d3..12cc3d1 100644
--- a/examples/simple/aux_ac_simple.yaml
+++ b/examples/simple/aux_ac_simple.yaml
@@ -5,7 +5,8 @@ external_components:
esphome:
name: aux_air_conditioner
- platform: ESP8266
+
+esp8266:
board: esp12e
# don't forget to set your's wifi settings!
diff --git a/tests/.gitignore b/tests/.gitignore
deleted file mode 100644
index 0bbf89c..0000000
--- a/tests/.gitignore
+++ /dev/null
@@ -1,10 +0,0 @@
-# Gitignore settings for ESPHome
-# This is an example and may include too much for your use-case.
-# You can modify this file to suit your needs.
-/.esphome/
-**/.pioenvs/
-**/.piolibdeps/
-**/lib/
-**/src/
-**/platformio.ini
-/secrets.yaml
diff --git a/tests/ac_send_packet_for_engineer.py b/tests/ac_send_packet_for_engineer.py
deleted file mode 100644
index ce26215..0000000
--- a/tests/ac_send_packet_for_engineer.py
+++ /dev/null
@@ -1,191 +0,0 @@
-import time
-import aioesphomeapi
-import asyncio
-import re
-import sys
-import argparse
-from aioesphomeapi.api_pb2 import (LOG_LEVEL_NONE,
- LOG_LEVEL_ERROR,
- LOG_LEVEL_WARN,
- LOG_LEVEL_INFO,
- LOG_LEVEL_DEBUG,
- LOG_LEVEL_VERBOSE,
- LOG_LEVEL_VERY_VERBOSE)
-
-def createParser ():
- parser = argparse.ArgumentParser(
- description='''This script is used for collecting logs from ac_aux ESPHome component.
- For more info, see https://github.com/GrKoR/ac_python_logger''',
- add_help = False)
- parent_group = parser.add_argument_group (title='Params')
- parent_group.add_argument ('--help', '-h', action='help', help='show this help message and exit')
- parent_group.add_argument ('-i', '--ip', nargs=1, required=True, help='IP address of the esphome device')
- parent_group.add_argument ('-p', '--pwd', nargs=1, required=True, help='native API password for the esphome device')
- return parser
-
-async def main():
- """Connect to an ESPHome device and wait for state changes."""
- api = aioesphomeapi.APIClient(namespace.ip[0], 6053, namespace.pwd[0])
-
- try:
- await api.connect(login=True)
- except aioesphomeapi.InvalidAuthAPIError as e:
- return print(e)
-
- print(api.api_version)
-
- async def display_off():
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x01, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x00],
- }
- )
-
- async def display_on():
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x01, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- }
- )
-
- async def ac_enable():
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x00, 0x87, 0xE0, 0x2F, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- }
- )
-
- async def ac_disable():
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x00, 0x87, 0xE0, 0x2F, 0xA0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00],
- }
- )
-
- async def ac_get11_01():
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x02, 0x00, 0x11, 0x01],
- }
- )
-
- async def ac_get11_00():
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x02, 0x00, 0x11, 0x00],
- }
- )
-
- async def ac_set_vlouver(lvr):
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, lvr, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- }
- )
-
- async def ac_set_hlouver(lvr):
- await api.execute_service(
- service,
- data={
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, lvr, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- }
- )
-
- # key надо искать в выводе list_entities_services
- service = aioesphomeapi.UserService(
- name="send_data",
- key=311254518,
- args=[
- aioesphomeapi.UserServiceArg(name="data_buf", type=aioesphomeapi.UserServiceArgType.INT_ARRAY),
- ],
- )
-
- time.sleep(7)
- await ac_get11_00()
- time.sleep(7)
- await ac_get11_01()
-
- #await ac_set_vlouver( 0b10010000 ) # swing on
- #await ac_set_vlouver( 0b10010111 ) # swing off
- #await ac_set_vlouver( 0b10010001 ) # 1
- #await ac_set_vlouver( 0b10010010 ) # 2
- #await ac_set_vlouver( 0b10010011 ) # 3
- #await ac_set_vlouver( 0b10010100 ) # 4
- #await ac_set_vlouver( 0b10010101 ) # 5
- #await ac_set_vlouver( 0b10010110 ) # не работает, сбрасывает на swing on
- #time.sleep(5)
-
- #await ac_set_hlouver( 0b00000000 ) # swing on
- #await ac_set_hlouver( 0b11100000 ) # swing off
- #await ac_set_hlouver( 0b00100000 ) # не работает, сбрасывает в swing off
- #await ac_set_hlouver( 0b01000000 ) # не работает, сбрасывает в swing off
- #await ac_set_hlouver( 0b01100000 ) # не работает, сбрасывает в swing off
- #await ac_set_hlouver( 0b10000000 ) # не работает, сбрасывает в swing off
- #await ac_set_hlouver( 0b10100000 ) # не работает, сбрасывает в swing off
- #await ac_set_hlouver( 0b11000000 ) # не работает, сбрасывает в swing off
- #time.sleep(5)
-
- async def test_byte(bt):
- await api.execute_service(
- service,
- data={
- #display on
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- #"data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- #display off
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- "data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0x00],
- # swing on
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- #"data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x90, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- # swing off
- # 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
- #"data_buf": [0xBB, 0x00, 0x06, 0x80, 0x00, 0x00, 0x0F, 0x00, 0x01, 0x01, 0x97, 0xE0, 0x00, 0x20, 0x00, 0xC0, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00],
- }
- )
- '''
- не проходит команда, если байт 1 или 7 не 0x00
- не проходит команда, если байт 3 не 0x80
-
- проходит и не меняется, если меняю байт 4 или 5
- '''
-
- #await test_byte(0b10000110)
- #await test_byte(0b01000110)
- #await test_byte(0b00100110)
- #await test_byte(0b00010110)
- time.sleep(2)
-
-
-parser = createParser()
-namespace = parser.parse_args()
-print("IP: ", namespace.ip[0])
-
-
-loop = asyncio.get_event_loop()
-try:
- #asyncio.ensure_future(main())
- #loop.run_forever()
- loop.run_until_complete(main())
-except aioesphomeapi.InvalidAuthAPIError as e:
- print(e)
-except KeyboardInterrupt:
- pass
-finally:
- loop.close()
- pass
\ No newline at end of file
diff --git a/tests/test-ext-esp32.yaml b/tests/test-ext-esp32.yaml
deleted file mode 100644
index 13ffe7e..0000000
--- a/tests/test-ext-esp32.yaml
+++ /dev/null
@@ -1,122 +0,0 @@
-external_components:
- - source: github://GrKoR/esphome_aux_ac_component@dev
- components: [ aux_ac ]
- refresh: 0s
-
-substitutions:
- devicename: test_aux_ac_ext_esp32
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP32
- board: nodemcu-32s
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- manual_ip:
- static_ip: 192.168.0.151 # Для примера
- gateway: !secret wifi_gateway
- subnet: !secret wifi_subnet
- dns1: 8.8.8.8
- dns2: 1.1.1.1
- reboot_timeout: 0s
- ap:
- ssid: Test AUX Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-uart:
- id: ac_uart_bus
- #tx_pin: GPIO1
- #rx_pin: GPIO3
- tx_pin: TX
- rx_pin: RX
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-sensor:
- - platform: uptime
- name: Uptime Sensor
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
- id: aux_id
- uart_id: ac_uart_bus
- period: 7s
- show_action: true
- display_inverted: true
- indoor_temperature:
- name: $upper_devicename Indoor Temperature
- id: ${devicename}_indoor_temp
- internal: false
- display_state:
- name: $upper_devicename Display State
- id: ${devicename}_display_state
- internal: false
- outdoor_temperature:
- name: $upper_devicename Outdoor Temperature
- id: ${devicename}_outdoor_temp
- internal: false
- outbound_temperature:
- name: $upper_devicename Coolant Outbound Temperature
- id: ${devicename}_outbound_temp
- internal: false
- inbound_temperature:
- name: $upper_devicename Coolant Inbound Temperature
- id: ${devicename}_inbound_temp
- internal: false
- compressor_temperature:
- name: $upper_devicename Compressor Temperature
- id: ${devicename}_strange_temp
- internal: false
- defrost_state:
- name: $upper_devicename Defrost State
- id: ${devicename}_defrost_state
- internal: false
- inverter_power:
- name: $upper_devicename Invertor Power
- id: ${devicename}_invertor_power
- internal: false
- preset_reporter:
- name: $upper_devicename Preset Reporter
- id: ${devicename}_preset_reporter
- internal: false
- visual:
- min_temperature: 16
- max_temperature: 32
- temperature_step: 0.5
- supported_modes:
- - HEAT_COOL
- - COOL
- - HEAT
- - DRY
- - FAN_ONLY
- custom_fan_modes:
- - MUTE
- - TURBO
- supported_presets:
- - SLEEP
- custom_presets:
- - CLEAN
- - HEALTH
- - ANTIFUNGUS
- supported_swing_modes:
- - VERTICAL
- - HORIZONTAL
- - BOTH
diff --git a/tests/test-ext-for-engineer.yaml b/tests/test-ext-for-engineer.yaml
deleted file mode 100644
index 465dbf2..0000000
--- a/tests/test-ext-for-engineer.yaml
+++ /dev/null
@@ -1,157 +0,0 @@
-external_components:
- - source: github://GrKoR/esphome_aux_ac_component@dev
- components: [ aux_ac ]
- refresh: 0s
-
-substitutions:
- devicename: test_aux_ac_ext_engeneer
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP8266
- board: esp12e
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- manual_ip:
- static_ip: !secret wifi_ip
- gateway: !secret wifi_gateway
- subnet: !secret wifi_subnet
- dns1: 8.8.8.8
- dns2: 1.1.1.1
- reboot_timeout: 0s
- ap:
- ssid: Test AUX Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
- services:
- # этот сервис можно вызвать из Home Assistant или Python. Он отправляет полученные байты в кондиционер
- - service: send_data
- variables:
- data_buf: int[]
- then:
- # ВАЖНО! Только для инженеров!
- # Вызывайте метод aux_ac.send_packet только если понимаете, что делаете! Он не проверяет данные, а передаёт
- # кондиционеру всё как есть. Какой эффект получится от передачи кондиционеру рандомных байт, никто не знает.
- # Вы действуете на свой страх и риск.
- - aux_ac.send_packet:
- id: aux_id
- data: !lambda |-
- std::vector data{};
- for (int n : data_buf) {
- data.push_back( (uint8_t) n );
- }
- return data;
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-web_server:
- port: 80
-
-uart:
- id: ac_uart_bus
- tx_pin: GPIO1
- rx_pin: GPIO3
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-sensor:
- - platform: uptime
- name: Uptime Sensor
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
- id: aux_id
- uart_id: ac_uart_bus
- period: 7s
- show_action: true
- display_inverted: true
- optimistic: true
- indoor_temperature:
- name: $upper_devicename Indoor Temperature
- id: ${devicename}_indoor_temp
- internal: false
- display_state:
- name: $upper_devicename Display State
- id: ${devicename}_display_state
- internal: false
- outdoor_temperature:
- name: $upper_devicename Outdoor Temperature
- id: ${devicename}_outdoor_temp
- internal: false
- outbound_temperature:
- name: $upper_devicename Coolant Outbound Temperature
- id: ${devicename}_outbound_temp
- internal: false
- inbound_temperature:
- name: $upper_devicename Coolant Inbound Temperature
- id: ${devicename}_inbound_temp
- internal: false
- compressor_temperature:
- name: $upper_devicename Compressor Temperature
- id: ${devicename}_strange_temp
- internal: false
- defrost_state:
- name: $upper_devicename Defrost State
- id: ${devicename}_defrost_state
- internal: false
- inverter_power:
- name: $upper_devicename Invertor Power
- id: ${devicename}_invertor_power
- internal: false
- preset_reporter:
- name: $upper_devicename Preset Reporter
- id: ${devicename}_preset_reporter
- internal: false
- visual:
- min_temperature: 16
- max_temperature: 32
- temperature_step: 0.5
- supported_modes:
- - HEAT_COOL
- - COOL
- - HEAT
- - DRY
- - FAN_ONLY
- custom_fan_modes:
- - MUTE
- - TURBO
- supported_presets:
- - SLEEP
- custom_presets:
- - CLEAN
- - HEALTH
- - ANTIFUNGUS
- supported_swing_modes:
- - VERTICAL
- - HORIZONTAL
- - BOTH
-
-
-switch:
- - platform: template
- name: AC Display
- lambda: |-
- if (id(${devicename}_display_state).state) {
- return true;
- } else {
- return false;
- }
- turn_on_action:
- - aux_ac.display_on: aux_id
- turn_off_action:
- - aux_ac.display_off: aux_id
\ No newline at end of file
diff --git a/tests/test-ext-power-limit.yaml b/tests/test-ext-power-limit.yaml
deleted file mode 100644
index c50079a..0000000
--- a/tests/test-ext-power-limit.yaml
+++ /dev/null
@@ -1,163 +0,0 @@
-external_components:
- - source: github://GrKoR/esphome_aux_ac_component@dev
- components: [ aux_ac ]
- refresh: 0s
-
-substitutions:
- devicename: test_ext_power_limitations
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP8266
- board: esp12e
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- manual_ip:
- static_ip: !secret wifi_ip
- gateway: !secret wifi_gateway
- subnet: !secret wifi_subnet
- dns1: 8.8.8.8
- dns2: 1.1.1.1
- reboot_timeout: 0s
- ap:
- ssid: Test AUX Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-web_server:
- port: 80
-
-uart:
- id: ac_uart_bus
- tx_pin: GPIO1
- rx_pin: GPIO3
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-sensor:
- - platform: uptime
- name: Uptime Sensor
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
- id: aux_id
- uart_id: ac_uart_bus
- period: 7s
- show_action: true
- display_inverted: true
- timeout: 150
- indoor_temperature:
- name: $upper_devicename Indoor Temperature
- id: ${devicename}_indoor_temp
- internal: false
- display_state:
- name: $upper_devicename Display State
- id: ${devicename}_display_state
- internal: false
- outdoor_temperature:
- name: $upper_devicename Outdoor Temperature
- id: ${devicename}_outdoor_temp
- internal: false
- outbound_temperature:
- name: $upper_devicename Coolant Outbound Temperature
- id: ${devicename}_outbound_temp
- internal: false
- inbound_temperature:
- name: $upper_devicename Coolant Inbound Temperature
- id: ${devicename}_inbound_temp
- internal: false
- compressor_temperature:
- name: $upper_devicename Compressor Temperature
- id: ${devicename}_strange_temp
- internal: false
- defrost_state:
- name: $upper_devicename Defrost State
- id: ${devicename}_defrost_state
- internal: false
- inverter_power:
- name: $upper_devicename Inverter Power
- id: ${devicename}_invertor_power
- internal: false
- preset_reporter:
- name: $upper_devicename Preset Reporter
- id: ${devicename}_preset_reporter
- internal: false
- inverter_power_limit_value:
- name: $upper_devicename Inverter Power Limit Value
- id: ${devicename}_inverter_power_limit_value
- internal: false
- inverter_power_limit_state:
- name: $upper_devicename Inverter Power Limit State
- id: ${devicename}_inverter_power_limit_state
- internal: false
- visual:
- min_temperature: 16
- max_temperature: 32
- temperature_step: 0.5
- supported_modes:
- - HEAT_COOL
- - COOL
- - HEAT
- - DRY
- - FAN_ONLY
- custom_fan_modes:
- - MUTE
- - TURBO
- supported_presets:
- - SLEEP
- custom_presets:
- - CLEAN
- - HEALTH
- - ANTIFUNGUS
- supported_swing_modes:
- - VERTICAL
- - HORIZONTAL
- - BOTH
-
-
-button:
- - platform: template
- name: ${upper_devicename} IPower Limit Off
- icon: "mdi:power-plug-off-outline"
- on_press:
- - aux_ac.power_limit_off: aux_id
-
- - platform: template
- name: ${upper_devicename} IPower Limit On Half
- icon: "mdi:fraction-one-half"
- on_press:
- - aux_ac.power_limit_on:
- id: aux_id
- limit: 50
-
-number:
- - platform: template
- name: ${upper_devicename} IPower Limit Value
- id: ${devicename}_ipower_limit_value
- icon: "mdi:battery-unknown"
- mode: "slider"
- min_value: 30
- max_value: 100
- step: 1
- set_action:
- then:
- - lambda: !lambda |-
- id(aux_id).powerLimitationOnSequence( x );
-
diff --git a/tests/test-local-airflow-dir.yaml b/tests/test-local-airflow-dir.yaml
deleted file mode 100644
index 2981e80..0000000
--- a/tests/test-local-airflow-dir.yaml
+++ /dev/null
@@ -1,126 +0,0 @@
-external_components:
- - source:
- type: local
- path: ../components
-
-substitutions:
- devicename: test_local_airflow_dir
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP8266
- board: esp12e
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- manual_ip:
- static_ip: !secret wifi_ip
- gateway: !secret wifi_gateway
- subnet: !secret wifi_subnet
- dns1: 8.8.8.8
- dns2: 1.1.1.1
- reboot_timeout: 0s
- ap:
- ssid: $upper_devicename Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-web_server:
- port: 80
-
-uart:
- id: ac_uart_bus
- tx_pin: GPIO1
- rx_pin: GPIO3
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-
-sensor:
- - platform: uptime
- name: Uptime Sensor
-
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
- id: aux_id
- uart_id: ac_uart_bus
- period: 7s
- show_action: true
- display_inverted: true
-
-
-button:
- - platform: template
- name: ${upper_devicename} VLouver Stop
- icon: "mdi:circle-small"
- on_press:
- - aux_ac.vlouver_stop: aux_id
-
- - platform: template
- name: ${upper_devicename} VLouver Swing
- icon: "mdi:pan-vertical"
- on_press:
- - aux_ac.vlouver_swing: aux_id
-
- - platform: template
- name: ${upper_devicename} VLouver Top
- icon: "mdi:pan-up"
- on_press:
- - aux_ac.vlouver_top: aux_id
-
- - platform: template
- name: ${upper_devicename} VLouver Middle Above
- icon: "mdi:pan-top-left"
- on_press:
- - aux_ac.vlouver_middle_above: aux_id
-
- - platform: template
- name: ${upper_devicename} VLouver Middle
- icon: "mdi:pan-left"
- on_press:
- - aux_ac.vlouver_middle: aux_id
-
- - platform: template
- name: ${upper_devicename} VLouver Middle Below
- icon: "mdi:pan-bottom-left"
- on_press:
- - aux_ac.vlouver_middle_below: aux_id
-
- - platform: template
- name: ${upper_devicename} VLouver Bottom
- icon: "mdi:pan-down"
- on_press:
- - aux_ac.vlouver_bottom: aux_id
-
-
-number:
- - platform: template
- name: ${upper_devicename} Vertical Louver
- id: ${devicename}_vlouver
- icon: "mdi:circle-small"
- mode: "slider"
- min_value: 0
- max_value: 6
- step: 1
- set_action:
- then:
- - lambda: !lambda |-
- if (x == 6) x = 7; // делаем так, чтобы выключение отрабатывать корректно
- id(aux_id).setVLouverSequence( static_cast(x) );
diff --git a/tests/test-local-power-limit.yaml b/tests/test-local-power-limit.yaml
deleted file mode 100644
index 655bc80..0000000
--- a/tests/test-local-power-limit.yaml
+++ /dev/null
@@ -1,163 +0,0 @@
-external_components:
- - source:
- type: local
- path: ../components
-
-substitutions:
- devicename: test_local_power_limitations
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP8266
- board: esp12e
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- manual_ip:
- static_ip: !secret wifi_ip
- gateway: !secret wifi_gateway
- subnet: !secret wifi_subnet
- dns1: 8.8.8.8
- dns2: 1.1.1.1
- reboot_timeout: 0s
- ap:
- ssid: Test AUX Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-web_server:
- port: 80
-
-uart:
- id: ac_uart_bus
- tx_pin: GPIO1
- rx_pin: GPIO3
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-sensor:
- - platform: uptime
- name: Uptime Sensor
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
- id: aux_id
- uart_id: ac_uart_bus
- period: 7s
- show_action: true
- display_inverted: true
- timeout: 150
- indoor_temperature:
- name: $upper_devicename Indoor Temperature
- id: ${devicename}_indoor_temp
- internal: false
- display_state:
- name: $upper_devicename Display State
- id: ${devicename}_display_state
- internal: false
- outdoor_temperature:
- name: $upper_devicename Outdoor Temperature
- id: ${devicename}_outdoor_temp
- internal: false
- outbound_temperature:
- name: $upper_devicename Coolant Outbound Temperature
- id: ${devicename}_outbound_temp
- internal: false
- inbound_temperature:
- name: $upper_devicename Coolant Inbound Temperature
- id: ${devicename}_inbound_temp
- internal: false
- compressor_temperature:
- name: $upper_devicename Compressor Temperature
- id: ${devicename}_strange_temp
- internal: false
- defrost_state:
- name: $upper_devicename Defrost State
- id: ${devicename}_defrost_state
- internal: false
- inverter_power:
- name: $upper_devicename Inverter Power
- id: ${devicename}_invertor_power
- internal: false
- preset_reporter:
- name: $upper_devicename Preset Reporter
- id: ${devicename}_preset_reporter
- internal: false
- inverter_power_limit_value:
- name: $upper_devicename Inverter Power Limit Value
- id: ${devicename}_inverter_power_limit_value
- internal: false
- inverter_power_limit_state:
- name: $upper_devicename Inverter Power Limit State
- id: ${devicename}_inverter_power_limit_state
- internal: false
- visual:
- min_temperature: 16
- max_temperature: 32
- temperature_step: 0.5
- supported_modes:
- - HEAT_COOL
- - COOL
- - HEAT
- - DRY
- - FAN_ONLY
- custom_fan_modes:
- - MUTE
- - TURBO
- supported_presets:
- - SLEEP
- custom_presets:
- - CLEAN
- - HEALTH
- - ANTIFUNGUS
- supported_swing_modes:
- - VERTICAL
- - HORIZONTAL
- - BOTH
-
-
-button:
- - platform: template
- name: ${upper_devicename} IPower Limit Off
- icon: "mdi:power-plug-off-outline"
- on_press:
- - aux_ac.power_limit_off: aux_id
-
- - platform: template
- name: ${upper_devicename} IPower Limit On Half
- icon: "mdi:fraction-one-half"
- on_press:
- - aux_ac.power_limit_on:
- id: aux_id
- limit: 50
-
-number:
- - platform: template
- name: ${upper_devicename} IPower Limit Value
- id: ${devicename}_ipower_limit_value
- icon: "mdi:battery-unknown"
- mode: "slider"
- min_value: 30
- max_value: 100
- step: 1
- set_action:
- then:
- - lambda: !lambda |-
- id(aux_id).powerLimitationOnSequence( x );
-
diff --git a/tests/test-local.yaml b/tests/test-local.yaml
deleted file mode 100644
index 068b424..0000000
--- a/tests/test-local.yaml
+++ /dev/null
@@ -1,124 +0,0 @@
-external_components:
- - source:
- type: local
- path: ../components
-
-substitutions:
- devicename: test_local_airflow_dir
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP8266
- board: esp12e
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- manual_ip:
- static_ip: !secret wifi_ip
- gateway: !secret wifi_gateway
- subnet: !secret wifi_subnet
- dns1: 8.8.8.8
- dns2: 1.1.1.1
- reboot_timeout: 0s
- ap:
- ssid: Test AUX Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-web_server:
- port: 80
-
-uart:
- id: ac_uart_bus
- tx_pin: GPIO1
- rx_pin: GPIO3
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-sensor:
- - platform: uptime
- name: Uptime Sensor
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
- id: aux_id
- uart_id: ac_uart_bus
- period: 7s
- show_action: true
- display_inverted: true
- optimistic: true
- indoor_temperature:
- name: $upper_devicename Indoor Temperature
- id: ${devicename}_indoor_temp
- internal: false
- display_state:
- name: $upper_devicename Display State
- id: ${devicename}_display_state
- internal: false
- outdoor_temperature:
- name: $upper_devicename Outdoor Temperature
- id: ${devicename}_outdoor_temp
- internal: false
- outbound_temperature:
- name: $upper_devicename Coolant Outbound Temperature
- id: ${devicename}_outbound_temp
- internal: false
- inbound_temperature:
- name: $upper_devicename Coolant Inbound Temperature
- id: ${devicename}_inbound_temp
- internal: false
- compressor_temperature:
- name: $upper_devicename Compressor Temperature
- id: ${devicename}_strange_temp
- internal: false
- defrost_state:
- name: $upper_devicename Defrost State
- id: ${devicename}_defrost_state
- internal: false
- inverter_power:
- name: $upper_devicename Invertor Power
- id: ${devicename}_invertor_power
- internal: false
- preset_reporter:
- name: $upper_devicename Preset Reporter
- id: ${devicename}_preset_reporter
- internal: false
- visual:
- min_temperature: 16
- max_temperature: 32
- temperature_step: 0.5
- supported_modes:
- - HEAT_COOL
- - COOL
- - HEAT
- - DRY
- - FAN_ONLY
- custom_fan_modes:
- - MUTE
- - TURBO
- supported_presets:
- - SLEEP
- custom_presets:
- - CLEAN
- - HEALTH
- - ANTIFUNGUS
- supported_swing_modes:
- - VERTICAL
- - HORIZONTAL
- - BOTH
diff --git a/tests/test-minimal.yaml b/tests/test-minimal.yaml
deleted file mode 100644
index 7df5756..0000000
--- a/tests/test-minimal.yaml
+++ /dev/null
@@ -1,49 +0,0 @@
-external_components:
- - source:
- type: local
- path: ../components
- #- source: github://GrKoR/esphome_aux_ac_component@dev
- #components: [ aux_ac ]
- #refresh: 0s
-
-substitutions:
- devicename: test_local_minimal
- upper_devicename: Test AUX
-
-esphome:
- name: $devicename
- platform: ESP8266
- board: esp12e
-
-wifi:
- ssid: !secret wifi_ssid
- password: !secret wifi_pass
- reboot_timeout: 0s
- ap:
- ssid: $upper_devicename Fallback Hotspot
- password: !secret wifi_ap_pass
-
-logger:
- level: DEBUG
- baud_rate: 0
-
-api:
- password: !secret api_pass
- reboot_timeout: 0s
-
-ota:
- - platform: esphome
- password: !secret ota_pass
-
-uart:
- id: ac_uart_bus
- tx_pin: GPIO1
- rx_pin: GPIO3
- baud_rate: 4800
- data_bits: 8
- parity: EVEN
- stop_bits: 1
-
-climate:
- - platform: aux_ac
- name: $upper_devicename
\ No newline at end of file