diff --git a/private/.gitignore b/private/.gitignore
deleted file mode 100644
index d8b4157..0000000
--- a/private/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-# Gitignore settings for ESPHome
-# This is an example and may include too much for your use-case.
-# You can modify this file to suit your needs.
-/.esphome/
-/secrets.yaml
diff --git a/private/ac_common.yaml b/private/ac_common.yaml
deleted file mode 100644
index 78621cf..0000000
--- a/private/ac_common.yaml
+++ /dev/null
@@ -1,95 +0,0 @@
-external_components:
-  - source: github://GrKoR/esphome_aux_ac_component
-    components: [ aux_ac ]
-    refresh: 0s
-    
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: ${wifi_ip}
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-    dns1: 8.8.8.8
-    dns2: 1.1.1.1
-  reboot_timeout: 0s
-  ap:
-    ssid: ${upper_devicename} Hotspot
-    password: !secret wifi_ap_pass
-  use_address: ${wifi_ota_ip}
-
-captive_portal:
-debug:
-
-logger:
-    level: DEBUG
-    # important: for avoiding collisions logger works with UART1 (for esp8266 tx = GPIO2, rx = None)
-    hardware_uart: UART1
-    baud_rate: 0
-
-api:
-  password: !secret api_pass
-
-ota:
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-  auth:
-    username: !secret web_server_user
-    password: !secret web_server_password
-
-# UART0 configuration for aircon communication
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-sensor:
-  - platform: uptime
-    name: ${upper_devicename} Uptime Sensor
-
-climate:
-  - platform: aux_ac
-    name: ${upper_devicename}
-    id: ${devicename}
-    uart_id: ac_uart_bus
-    period: 7s            # период опроса состояния сплита, по дефолту 7 сек
-    show_action: true     # надо ли показывать текущий режим работы: при HEAT_COOL mode сплит может греть (HEAT), охлаждать (COOL) или бездействовать (IDLE)
-    indoor_temperature:   # сенсор, показывающий температуру воздуха на внутреннем блоке кондиционера; имеет все те же параметры, как и любой сенсор ESPHome
-      name: ${upper_devicename} AC Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false    # сенсор установлен как внутренний по дефолту (не попадёт в Home Assistant)
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL   # не AUTO, так как только нагревает и остужает. В доках на ESPHome говорится, что AUTO - это если у устройства есть календарь и какие-то установки по расписанию.
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - FEEL
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH
\ No newline at end of file
diff --git a/private/ac_kidsroom.yaml b/private/ac_kidsroom.yaml
deleted file mode 100644
index ffb03d9..0000000
--- a/private/ac_kidsroom.yaml
+++ /dev/null
@@ -1,7 +0,0 @@
-substitutions:
-  devicename: kidsroom_ac
-  upper_devicename: Kids room AC
-  wifi_ip: !secret wifi_ip_kidsroom
-  wifi_ota_ip: !secret wifi_ota_ip_kidsroom
-
-<<: !include ac_common.yaml
\ No newline at end of file
diff --git a/private/ac_kitchen.yaml b/private/ac_kitchen.yaml
deleted file mode 100644
index 2712384..0000000
--- a/private/ac_kitchen.yaml
+++ /dev/null
@@ -1,7 +0,0 @@
-substitutions:
-  devicename: kitchen_ac
-  upper_devicename: Kitchen AC
-  wifi_ip: !secret wifi_ip_kitchen
-  wifi_ota_ip: !secret wifi_ota_ip_kitchen
-
-<<: !include ac_common.yaml
\ No newline at end of file
diff --git a/private/ac_livingroom.yaml b/private/ac_livingroom.yaml
deleted file mode 100644
index 5571e4d..0000000
--- a/private/ac_livingroom.yaml
+++ /dev/null
@@ -1,7 +0,0 @@
-substitutions:
-  devicename: livingroom_ac
-  upper_devicename: Livingroom AC
-  wifi_ip: !secret wifi_ip_livingroom
-  wifi_ota_ip: !secret wifi_ota_ip_livingroom
-
-<<: !include ac_common.yaml
\ No newline at end of file
diff --git a/private/ac_masterbedroom.yaml b/private/ac_masterbedroom.yaml
deleted file mode 100644
index 4a2757f..0000000
--- a/private/ac_masterbedroom.yaml
+++ /dev/null
@@ -1,7 +0,0 @@
-substitutions:
-  devicename: masterbedroom_ac
-  upper_devicename: Master bedroom AC
-  wifi_ip: !secret wifi_ip_masterbedroom
-  wifi_ota_ip: !secret wifi_ota_ip_masterbedroom
-
-<<: !include ac_common.yaml
\ No newline at end of file