diff --git a/examples/advanced/ac_common.yaml b/examples/advanced/ac_common.yaml
deleted file mode 100644
index e012151..0000000
--- a/examples/advanced/ac_common.yaml
+++ /dev/null
@@ -1,122 +0,0 @@
-# DON'T COMPILE THIS FILE
-# This file contains common settings for all air conditioners of your house
-external_components:
-  - source: github://GrKoR/esphome_aux_ac_component
-    components: [ aux_ac ]
-    refresh: 0s
-
-esphome:
-  name: $devicename
-  platform: ESP8266
-  board: esp12e
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_pass
-  manual_ip:
-    static_ip: ${wifi_ip}
-    gateway: !secret wifi_gateway
-    subnet: !secret wifi_subnet
-  ap:
-    ssid: ${upper_devicename} Hotspot
-    password: !secret wifi_ap_pass
-  use_address: ${wifi_ota_ip}
-
-captive_portal:
-debug:
-
-logger:
-    level: DEBUG
-    baud_rate: 0
-    # set hardware_uart to UART1 and comment out baud_rate above in case of boot crashes
-    # it is suitable if you need hardware loggin
-    # hardware_uart: UART1
-
-api:
-  password: !secret api_pass
-
-ota:
-  password: !secret ota_pass
-
-web_server:
-  port: 80
-  auth:
-    username: !secret web_server_user
-    password: !secret web_server_password
-
-# UART0 configuration for AUX air conditioner communication
-uart:
-  id: ac_uart_bus
-  tx_pin: GPIO1
-  rx_pin: GPIO3
-  baud_rate: 4800
-  data_bits: 8
-  parity: EVEN
-  stop_bits: 1
-
-
-
-climate:
-  - platform: aux_ac
-    name: ${upper_devicename}
-    id: aux_id
-    uart_id: ac_uart_bus
-    period: 7s
-    show_action: true
-    display_inverted: true
-    indoor_temperature:
-      name: ${upper_devicename} Indoor Temperature
-      id: ${devicename}_indoor_temp
-      internal: false
-    display_state:
-      name: $upper_devicename Display State
-      id: ${devicename}_display_state
-      internal: false
-    visual:
-      min_temperature: 16
-      max_temperature: 32
-      temperature_step: 0.5
-    supported_modes:
-      - HEAT_COOL
-      - COOL
-      - HEAT
-      - DRY
-      - FAN_ONLY
-    custom_fan_modes:
-      - MUTE
-      - TURBO
-    supported_presets:
-      - SLEEP
-    custom_presets:
-      - CLEAN
-      - FEEL
-      - HEALTH
-      - ANTIFUNGUS
-    supported_swing_modes:
-      - VERTICAL
-      - HORIZONTAL
-      - BOTH
-
-
-sensor:
-  # just wifi signal strength for debug purpose only
-  - platform: wifi_signal
-    name: ${upper_devicename} WiFi Signal
-    update_interval: 30s
-    unit_of_measurement: "dBa"
-    accuracy_decimals: 0
-
-
-switch:
-  - platform: template
-    name: $upper_devicename Display
-    lambda: |-
-      if (id(${devicename}_display_state).state) {
-        return true;
-      } else {
-        return false;
-      }
-    turn_on_action:
-      - aux_ac.display_on: aux_id
-    turn_off_action:
-      - aux_ac.display_off: aux_id