diff --git a/.gitignore b/.gitignore
index 1c4bbeb..66c9f45 100644
--- a/.gitignore
+++ b/.gitignore
@@ -11,11 +11,7 @@
 **/secrets.yaml
 **/livingroom_ac/
 **/kitchen_ac/
-**/examples
+/examples/*/*.h
 **/tests/test_*
 **/__pycache__
-**/private/
-**/docs/
-**/enclosure/
-**/images/
-**/tests/
+**/private/
\ No newline at end of file
diff --git a/ac_common.yaml b/ac_common.yaml
new file mode 100644
index 0000000..911ef52
--- /dev/null
+++ b/ac_common.yaml
@@ -0,0 +1,123 @@
+# DON'T COMPILE THIS FILE
+# This file contains common settings for all air conditioners of your house
+external_components:
+    - source: github://GrKoR/esphome_aux_ac_component
+      components: [ aux_ac ]
+      refresh: 0s
+  
+  esphome:
+    name: $devicename
+    platform: ESP8266
+    board: esp12e
+  
+  wifi:
+    ssid: !secret wifi_ssid
+    password: !secret wifi_pass
+    manual_ip:
+      static_ip: ${wifi_ip}
+      gateway: !secret wifi_gateway
+      subnet: !secret wifi_subnet
+    ap:
+      ssid: ${upper_devicename} Hotspot
+      password: !secret wifi_ap_pass
+    use_address: ${wifi_ota_ip}
+  
+  captive_portal:
+  debug:
+  
+  logger:
+      level: DEBUG
+      baud_rate: 0
+      # set hardware_uart to UART1 and comment out baud_rate above in case of boot crashes
+      # it is suitable if you need hardware loggin
+      # hardware_uart: UART1
+  
+  api:
+    password: !secret api_pass
+  
+  ota:
+    password: !secret ota_pass
+  
+  web_server:
+    port: 80
+    auth:
+      username: !secret web_server_user
+      password: !secret web_server_password
+  
+  # UART0 configuration for AUX air conditioner communication
+  uart:
+    id: ac_uart_bus
+    tx_pin: GPIO1
+    rx_pin: GPIO3
+    baud_rate: 4800
+    data_bits: 8
+    parity: EVEN
+    stop_bits: 1
+  
+  
+  
+  climate:
+    - platform: aux_ac
+      name: ${upper_devicename}
+      id: aux_id
+      uart_id: ac_uart_bus
+      period: 7s
+      show_action: true
+      display_inverted: true
+      indoor_temperature:
+        name: ${upper_devicename} Indoor Temperature
+        id: ${devicename}_indoor_temp
+        internal: false
+      display_state:
+        name: $upper_devicename Display State
+        id: ${devicename}_display_state
+        internal: false
+      visual:
+        min_temperature: 16
+        max_temperature: 32
+        temperature_step: 0.5
+      supported_modes:
+        - HEAT_COOL
+        - COOL
+        - HEAT
+        - DRY
+        - FAN_ONLY
+      custom_fan_modes:
+        - MUTE
+        - TURBO
+      supported_presets:
+        - SLEEP
+      custom_presets:
+        - CLEAN
+        - FEEL
+        - HEALTH
+        - ANTIFUNGUS
+      supported_swing_modes:
+        - VERTICAL
+        - HORIZONTAL
+        - BOTH
+  
+  
+  sensor:
+    # just wifi signal strength for debug purpose only
+    - platform: wifi_signal
+      name: ${upper_devicename} WiFi Signal
+      update_interval: 30s
+      unit_of_measurement: "dBa"
+      accuracy_decimals: 0
+  
+  
+  switch:
+    - platform: template
+      name: $upper_devicename Display
+      lambda: |-
+        if (id(${devicename}_display_state).state) {
+          return true;
+        } else {
+          return false;
+        }
+      turn_on_action:
+        - aux_ac.display_on: aux_id
+      turn_off_action:
+        - aux_ac.display_off: aux_id
+  
\ No newline at end of file
diff --git a/examples/simple/aux_ac_simple.yaml b/examples/simple/aux_ac_simple.yaml
index 3da24b1..df12e23 100644
--- a/examples/simple/aux_ac_simple.yaml
+++ b/examples/simple/aux_ac_simple.yaml
@@ -1,5 +1,5 @@
 external_components:
-  - source: github://Brokly/esphome_aux_ac_component
+  - source: github://GrKoR/esphome_aux_ac_component
     components: [ aux_ac ]
     refresh: 0s
 
@@ -43,4 +43,4 @@ uart:
 
 climate:
   - platform: aux_ac
-    name: "AC Name"
+    name: "AC Name"
\ No newline at end of file