diff --git a/awg_config.sh b/awg_config.sh
new file mode 100644
index 0000000..5a75383
--- /dev/null
+++ b/awg_config.sh
@@ -0,0 +1,293 @@
+#!/bin/sh
+
+install_awg_packages() {
+    # Получение pkgarch с наибольшим приоритетом
+    PKGARCH=$(opkg print-architecture | awk 'BEGIN {max=0} {if ($3 > max) {max = $3; arch = $2}} END {print arch}')
+
+    TARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 1)
+    SUBTARGET=$(ubus call system board | jsonfilter -e '@.release.target' | cut -d '/' -f 2)
+    VERSION=$(ubus call system board | jsonfilter -e '@.release.version')
+    PKGPOSTFIX="_v${VERSION}_${PKGARCH}_${TARGET}_${SUBTARGET}.ipk"
+    BASE_URL="https://github.com/Slava-Shchipunov/awg-openwrt/releases/download/"
+
+    AWG_DIR="/tmp/amneziawg"
+    mkdir -p "$AWG_DIR"
+    
+    if opkg list-installed | grep -q kmod-amneziawg; then
+        echo "kmod-amneziawg already installed"
+    else
+        KMOD_AMNEZIAWG_FILENAME="kmod-amneziawg${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${KMOD_AMNEZIAWG_FILENAME}"
+        wget -O "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "kmod-amneziawg file downloaded successfully"
+        else
+            echo "Error downloading kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+            exit 1
+        fi
+        
+        opkg install "$AWG_DIR/$KMOD_AMNEZIAWG_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "kmod-amneziawg file downloaded successfully"
+        else
+            echo "Error installing kmod-amneziawg. Please, install kmod-amneziawg manually and run the script again"
+            exit 1
+        fi
+    fi
+
+    if opkg list-installed | grep -q amneziawg-tools; then
+        echo "amneziawg-tools already installed"
+    else
+        AMNEZIAWG_TOOLS_FILENAME="amneziawg-tools${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${AMNEZIAWG_TOOLS_FILENAME}"
+        wget -O "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "amneziawg-tools file downloaded successfully"
+        else
+            echo "Error downloading amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+            exit 1
+        fi
+
+        opkg install "$AWG_DIR/$AMNEZIAWG_TOOLS_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "amneziawg-tools file downloaded successfully"
+        else
+            echo "Error installing amneziawg-tools. Please, install amneziawg-tools manually and run the script again"
+            exit 1
+        fi
+    fi
+    
+    if opkg list-installed | grep -q luci-app-amneziawg; then
+        echo "luci-app-amneziawg already installed"
+    else
+        LUCI_APP_AMNEZIAWG_FILENAME="luci-app-amneziawg${PKGPOSTFIX}"
+        DOWNLOAD_URL="${BASE_URL}v${VERSION}/${LUCI_APP_AMNEZIAWG_FILENAME}"
+        wget -O "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME" "$DOWNLOAD_URL"
+
+        if [ $? -eq 0 ]; then
+            echo "luci-app-amneziawg file downloaded successfully"
+        else
+            echo "Error downloading luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+            exit 1
+        fi
+
+        opkg install "$AWG_DIR/$LUCI_APP_AMNEZIAWG_FILENAME"
+
+        if [ $? -eq 0 ]; then
+            echo "luci-app-amneziawg file downloaded successfully"
+        else
+            echo "Error installing luci-app-amneziawg. Please, install luci-app-amneziawg manually and run the script again"
+            exit 1
+        fi
+    fi
+
+    rm -rf "$AWG_DIR"
+}
+
+echo "opkg update"
+opkg update
+
+#проверка и установка пакетов AmneziaWG
+install_awg_packages
+
+#проверяем установлени ли библиотека jq
+if opkg list-installed | grep -q jq; then
+    echo "jq already installed..."
+else
+	echo "jq not installed. Installed jq..."
+	opkg install jq
+	if [ $? -eq 0 ]; then
+		echo "jq file downloaded successfully"
+	else
+		echo "Error installing jq. Please, install jq manually and run the script again"
+		exit 1
+	fi
+fi
+
+#проверяем установлени ли пакет dnsmasq-full
+if opkg list-installed | grep -q dnsmasq-full; then
+	echo "dnsmasq-full already installed..."
+else
+	echo "Installed dnsmasq-full..."
+	cd /tmp/ && opkg download dnsmasq-full
+	opkg remove dnsmasq && opkg install dnsmasq-full --cache /tmp/
+
+	[ -f /etc/config/dhcp-opkg ] && cp /etc/config/dhcp /etc/config/dhcp-old && mv /etc/config/dhcp-opkg /etc/config/dhcp
+fi
+
+#проверяем установлени ли пакет coreutils-base64
+if opkg list-installed | grep -q coreutils-base64; then
+	echo "coreutils-base64 already installed..."
+else
+	echo "Installed coreutils-base64"
+	opkg install coreutils-base64
+	if [ $? -eq 0 ]; then
+		echo "coreutils-base64 file downloaded successfully"
+	else
+		echo "Error installing coreutils-base64. Please, install coreutils-base64 manually and run the script again"
+		exit 1
+	fi
+fi
+
+
+#запрос конфигурации WARP
+result=$(curl 'https://warp.llimonix.pw/api/warp' \
+  -H 'Accept: */*' \
+  -H 'Accept-Language: ru-RU,ru;q=0.9,en-US;q=0.8,en;q=0.7' \
+  -H 'Connection: keep-alive' \
+  -H 'Content-Type: application/json' \
+  -H 'Origin: https://warp.llimonix.pw' \
+  -H 'Referer: https://warp.llimonix.pw/' \
+  -H 'Sec-Fetch-Dest: empty' \
+  -H 'Sec-Fetch-Mode: cors' \
+  -H 'Sec-Fetch-Site: same-origin' \
+  -H 'User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/133.0.0.0 Safari/537.36' \
+  -H 'sec-ch-ua: "Not(A:Brand";v="99", "Google Chrome";v="133", "Chromium";v="133")' \
+  -H 'sec-ch-ua-mobile: ?0' \
+  -H 'sec-ch-ua-platform: "Windows"' \
+  --data-raw '{"selectedServices":[],"siteMode":"all","deviceType":"computer"}')
+
+
+#парсим результат запроса конфигурации WARP
+content=$(echo $result | jq '.content')
+configBase64=$(echo $content | jq -r '.configBase64')
+#echo "$result"
+warp_config=$(echo "$configBase64" | base64 -d)
+#echo "$warp_config"
+while IFS=' = ' read -r line; do
+    if echo "$line" | grep -q "="; then
+        # Разделяем строку по первому вхождению "="
+        key=$(echo "$line" | cut -d'=' -f1 | xargs)  # Убираем пробелы
+        value=$(echo "$line" | cut -d'=' -f2- | xargs)  # Убираем пробелы
+        eval "$key=\"$value\""
+	fi
+done < <(echo "$warp_config")
+
+#вытаскиваем нужные нам данные из распарсинного ответа
+Address=$(echo "$Address" | cut -d',' -f1)
+DNS=$(echo "$DNS" | cut -d',' -f1)
+AllowedIPs=$(echo "$AllowedIPs" | cut -d',' -f1)
+EndpointIP=$(echo "$Endpoint" | cut -d':' -f1)
+EndpointPort=$(echo "$Endpoint" | cut -d':' -f2)
+
+echo "Create and configure tunnel AmneziaWG WARP..."
+
+#задаём имя интерфейса
+INTERFACE_NAME="awg_route0"
+CONFIG_NAME="amnezia_route0"
+PROTO="amneziawg"
+ZONE_NAME="awg"
+
+uci set network.${INTERFACE_NAME}=interface
+uci set network.${INTERFACE_NAME}.proto=$PROTO
+uci set network.${INTERFACE_NAME}.private_key=$PrivateKey
+uci set network.${INTERFACE_NAME}.listen_port='51821'
+uci set network.${INTERFACE_NAME}.addresses=$Address
+uci set network.${INTERFACE_NAME}.awg_jc=$Jc
+uci set network.${INTERFACE_NAME}.awg_jmin=$Jmin
+uci set network.${INTERFACE_NAME}.awg_jmax=$Jmax
+uci set network.${INTERFACE_NAME}.awg_s1=$S1
+uci set network.${INTERFACE_NAME}.awg_s2=$S2
+uci set network.${INTERFACE_NAME}.awg_h1=$H1
+uci set network.${INTERFACE_NAME}.awg_h2=$H2
+uci set network.${INTERFACE_NAME}.awg_h3=$H3
+uci set network.${INTERFACE_NAME}.awg_h4=$H4
+uci set network.${INTERFACE_NAME}.mtu=$MTU
+
+if ! uci show network | grep -q ${CONFIG_NAME}; then
+	uci add network ${CONFIG_NAME}
+	echo "add $INTERFACE_NAME"
+fi
+
+uci set network.@${CONFIG_NAME}[0]=$CONFIG_NAME
+uci set network.@${CONFIG_NAME}[0].name="${INTERFACE_NAME}_client"
+uci set network.@${CONFIG_NAME}[0].public_key=$PublicKey
+uci set network.@${CONFIG_NAME}[0].route_allowed_ips='0'
+uci set network.@${CONFIG_NAME}[0].persistent_keepalive='25'
+uci set network.@${CONFIG_NAME}[0].endpoint_host=$EndpointIP
+uci set network.@${CONFIG_NAME}[0].allowed_ips='0.0.0.0/0'
+uci set network.@${CONFIG_NAME}[0].endpoint_port=$EndpointPort
+uci commit network
+
+if ! uci show firewall | grep -q "@zone.*name='${ZONE_NAME}'"; then
+	printf "\033[32;1mZone Create\033[0m\n"
+	uci add firewall zone
+	uci set firewall.@zone[-1].name=$ZONE_NAME
+	uci set firewall.@zone[-1].network=$INTERFACE_NAME
+	uci set firewall.@zone[-1].forward='REJECT'
+	uci set firewall.@zone[-1].output='ACCEPT'
+	uci set firewall.@zone[-1].input='REJECT'
+	uci set firewall.@zone[-1].masq='1'
+	uci set firewall.@zone[-1].mtu_fix='1'
+	uci set firewall.@zone[-1].family='ipv4'
+	uci commit firewall
+fi
+
+if ! uci show firewall | grep -q "@forwarding.*name='${ZONE_NAME}'"; then
+	printf "\033[32;1mConfigured forwarding\033[0m\n"
+	uci add firewall forwarding
+	uci set firewall.@forwarding[-1]=forwarding
+	uci set firewall.@forwarding[-1].name="${ZONE_NAME}-lan"
+	uci set firewall.@forwarding[-1].dest=${ZONE_NAME}
+	uci set firewall.@forwarding[-1].src='lan'
+	uci set firewall.@forwarding[-1].family='ipv4'
+	uci commit firewall
+fi
+
+if [ -f "/etc/init.d/podkop" ]; then
+    path_podkop_config="/etc/config/podkop"
+	path_podkop_config_backup="/root/podkop"
+	URL="https://raw.githubusercontent.com/CodeRoK7/RouterichAX3000_configs/refs/heads/main"
+	printf "Podkop installed. Reconfigured on AWG WARP? (y/n): \n"
+	read is_reconfig_podkop
+	if [ "$is_reconfig_podkop" = "y" ] || [ "$is_reconfig_podkop" = "Y" ]; then
+		cp -f "$path_podkop_config" "$path_podkop_config_backup"
+		wget -O "$path_podkop_config" "$URL/podkop" 
+		echo "Backup of your config in path '$path_podkop_config_backup'"
+		echo "Podkop reconfigured..."
+		echo "Service Podkop restart..."
+		service podkop restart
+	fi
+else
+	printf "\033[32;1mInstall and configure PODKOP (a tool for point routing of traffic)?? (y/n): \033[0m\n"
+	read is_install_podkop
+
+	if [ "$is_install_podkop" = "y" ] || [ "$is_install_podkop" = "Y" ]; then
+		DOWNLOAD_DIR="/tmp/podkop"
+		mkdir -p "$DOWNLOAD_DIR"
+		REPO="https://api.github.com/repos/itdoginfo/podkop/releases/tags/v0.2.5"
+		wget -qO- "$REPO" | grep -o 'https://[^"]*\.ipk' | while read -r url; do
+			filename=$(basename "$url")
+			echo "Download $filename..."
+			wget -q -O "$DOWNLOAD_DIR/$filename" "$url"
+		done
+		opkg install $DOWNLOAD_DIR/podkop*.ipk
+		opkg install $DOWNLOAD_DIR/luci-app-podkop*.ipk
+		opkg install $DOWNLOAD_DIR/luci-i18n-podkop-ru*.ipk
+		rm -f $DOWNLOAD_DIR/podkop*.ipk $DOWNLOAD_DIR/luci-app-podkop*.ipk $DOWNLOAD_DIR/luci-i18n-podkop-ru*.ipk
+
+		uci set podkop.main.mode='vpn'
+		uci set podkop.main.interface="$INTERFACE_NAME"
+		uci set podkop.main.domain_list_enabled='1'
+		uci set podkop.main.domain_list='ru_inside'
+		uci set podkop.main.delist_domains_enabled='0'
+		uci add_list podkop.main.subnets='meta'
+		uci add_list podkop.main.subnets='twitter'
+		uci add_list podkop.main.subnets='discord'
+		uci commit podkop
+		echo "Service Podkop restart..."
+		service podkop restart
+	fi
+fi
+
+printf  "\033[32;1mStop and disabled service 'youtubeUnblock'...\033[0m"
+service youtubeUnblock stop
+service youtubeUnblock disable
+
+printf  "Configured completed...\n\033[32;1mRestart network...\033[0m\n"
+service firewall restart
+service network restart
diff --git a/configure_zaprets.sh b/configure_zaprets.sh
index 10f611c..c6cebd5 100644
--- a/configure_zaprets.sh
+++ b/configure_zaprets.sh
@@ -35,18 +35,18 @@ then
   do
     cp -f "$DIR/$file" "$DIR_BACKUP/$file"  
   done
+
+  echo "Replace configs..."
+
+  for file in $config_files
+  do
+    if [ "$file" != "dhcp" ] 
+    then 
+      wget -O "$DIR/$file" "$URL/$file" 
+    fi
+  done
 fi
 
-echo "Replace configs..."
-
-for file in $config_files
-do
-  if [ "$file" != "dhcp" ] 
-  then 
-    wget -O "$DIR/$file" "$URL/$file" 
-  fi
-done
-
 echo "Configure dhcp..."
 
 uci set dhcp.cfg01411c.strictorder='1'
diff --git a/podkop b/podkop
new file mode 100644
index 0000000..1baa571
--- /dev/null
+++ b/podkop
@@ -0,0 +1,26 @@
+
+config main 'main'
+	option mode 'vpn'
+	option domain_list_enabled '1'
+	option subnets_list_enabled '1'
+	option custom_domains_list_enabled 'disabled'
+	option custom_subnets_list_enabled 'disabled'
+	option all_traffic_from_ip_enabled '0'
+	option custom_download_domains_list_enabled '0'
+	option custom_download_subnets_list_enabled '0'
+	option exclude_from_ip_enabled '0'
+	option exclude_ntp '1'
+	option update_interval '0 4 * * *'
+	option custom_local_domains_list_enabled '0'
+	option interface 'awg_route0'
+	option domain_list 'ru_inside'
+	option delist_domains_enabled '0'
+	list subnets 'meta'
+	list subnets 'twitter'
+	list subnets 'discord'
+
+config second 'second'
+	option second_enable '0'
+	option domain_list_enabled '0'
+	list domains 'youtube'
+