* centralize PSRAM usage (application code only)
* update logging
* update logging
* fix use after free
* initialize buffer
* free rgb_image before ussing it for new allocation
* use wrapper function
* switch log level to debug
* .
* undo adding free() calls
* .
* add names to all CImage instances
* .
* .
* .
* revert changes of stbi_image_free() with free_psram_heap() on the places where is is not in PSRAM
* .
* typos
* typo
* Added MQTT Outbox explanation/warning
* added CONFIG_SPIRAM_USE_MEMMAP explanation
---------
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Run the Homeassistant Discovery directly after connecting to the broker. Before it was delayed 10s and happened while the first round alredy was in progress
* schedule sending HA discovery and static topics
* Allow setting QOS for MQTT topics
* .
* .
* change MQTT QOS1 expiration time from (default) 30 to 5s
* add logging of heap change on MQTT topic sendings
* wait for MQTT transmission timeout after publishing
* use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap
* .
* use PSRAM for the MQTT outbox
* use QOS1 for HA discovery again
* .
* .
* disable delay, not needed with PSRAM
* .
* consolidated scheduledSendingOf_DiscoveryAndStaticTopics into sendingOf_DiscoveryAndStaticTopics_scheduled
* Send Homeasstsiatnt Discovery and static data in MQTT step instead of when the wifi gets connected
* "WIFI roaming" by channel scan (AP switching at low RSSI) (#2120)
* Activate 802.11kv wifi mesh roaming
* Activate roaming by scanning
* Revert stack reducation
* move Wifi, LWIP and BSSI to PSRAm
* added State Class "measurement" to rate_per_time_unit (#2116)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap
* use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap
# Conflicts:
# code/components/jomjol_mqtt/server_mqtt.cpp
# Conflicts:
# code/components/jomjol_mqtt/server_mqtt.cpp
* .
* .
* move to next PR
* Update code/components/jomjol_mqtt/server_mqtt.cpp
* Update code/components/jomjol_mqtt/server_mqtt.cpp
---------
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com>
#force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem]
#free 256kb of internal memory :
#I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory.
CONFIG_SPIRAM_BANKSWITCH_ENABLE=n
#CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set
* delete img_convert.h as included in code\components\tflite-micro-esp-examples\components\esp32-camera\conversions\include\img_converters.h
* macro definition #ifdef ENABLE_SOFTAP
* comment translation
* translation part #2
* code translation from DE to ENG #part3
* translation #4
* dismantled =>splitted
* bereich => range
* Update defines.h
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
* defines changes
* Finish #define move + #define STBI_ONLY_JPEGsave 2% of Flash
* remove the defines on the old places
* ClassFlowCNNGeneral in define.h
* revert to origin
* fix translation not ready
* add sensor status, show special index/setup page in case of a critical error
* continue booting on PSRAM error
* Update main.cpp
added log messages
* init PSRAM and add more log messages
* cleanup of init checks
* .
* .
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
This reverts commit cb84074981339d44266a1a999a7567a722af11f4.
Cleanup REST API (#1255)
* Replaced URIs:
- value.html => value
- statusflow.html => statusflow
- cputemp.html => cputemp
- rssi.html => rssi
- statusflow.html => statusflow
Removed URLs:
- wasserzaehler.html
* keep legacy API
* .
* .
* .
* .
* .
* .
* updated links
Remove ErrorMessage
Fix various warnings which become fatal with later gcc versons in esp-idf 5.x (#1268)
- we cannot use partial initialisation of structs in C++ files (copied from example C files initially it seems)
- IRAM_ATTR uses a COUNTER, do not use the attribute on the implementation
- provide missing copy implementations for Rgb and Hsv
- one no longer can |= on volatile variables; use = | instead
- fix project and header includes
- avoid redefining BLINK_GPIO
- Remove defined but unused variables
- Fix printf formats
- Add missing case statement (HTTP_EVENT_REDIRECT)
- RMT needs to be updated to new interface (CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is on currently; see https://docs.espressif.com/projects/esp-idf/en/release-v5.0/esp32/api-reference/peripherals/rmt.html)
- Adjust tcpip_adpater_* to esp_netif_*
- Use buffered versions of *ntoa* functions for IPv4 addresses and not a static on the stack (also fixes warnings)
- Whatever I missed
Correct spelling of "Hostname" (#1270)
Correct sdkonfig
Increase max handler due to new handlers
Revert "Cleanup REST API (#1255)"
This reverts commit f3e73ec64a.
Revert "Increase max handler due to new handlers"
This reverts commit cbd63ad4bd.
System instable
Revert "Revert "Cleanup REST API (#1255)""
This reverts commit 2793c761413ffb987ab6a75da372e00e9f2f2cbd.
Co-Authored-By: Bjoern A. Zeeb <patch@zabbadoz.net>
