* Migration to PlatformIO 6.1.0
* Disable RMTMEM usage as it is no longer allowed -> Smart LEDs not functional!
* moved miniz into subfolder of jomjol_fileserver_ota, else it does not build anymore.
* cleanup
* fix leading NaN (#2310)
* Migration to PlatformIO 6.1.0
* Disable RMTMEM usage as it is no longer allowed -> Smart LEDs not functional!
* moved miniz into subfolder of jomjol_fileserver_ota, else it does not build anymore.
* cleanup
* Task watchdog has new config name
* Fix return value check. It must be something else than ESP_FAIL, but it does not need to be ESP_OK!
* add missing strucures to work around new RMTMEM restriction (untested)
---------
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* centralize PSRAM usage (application code only)
* update logging
* update logging
* fix use after free
* initialize buffer
* free rgb_image before ussing it for new allocation
* use wrapper function
* switch log level to debug
* .
* undo adding free() calls
* .
* add names to all CImage instances
* .
* .
* .
* revert changes of stbi_image_free() with free_psram_heap() on the places where is is not in PSRAM
* .
* typos
* typo
* Added MQTT Outbox explanation/warning
* added CONFIG_SPIRAM_USE_MEMMAP explanation
---------
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Run the Homeassistant Discovery directly after connecting to the broker. Before it was delayed 10s and happened while the first round alredy was in progress
* schedule sending HA discovery and static topics
* Allow setting QOS for MQTT topics
* .
* .
* change MQTT QOS1 expiration time from (default) 30 to 5s
* add logging of heap change on MQTT topic sendings
* wait for MQTT transmission timeout after publishing
* use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap
* .
* use PSRAM for the MQTT outbox
* use QOS1 for HA discovery again
* .
* .
* disable delay, not needed with PSRAM
* .
* consolidated scheduledSendingOf_DiscoveryAndStaticTopics into sendingOf_DiscoveryAndStaticTopics_scheduled
* Send Homeasstsiatnt Discovery and static data in MQTT step instead of when the wifi gets connected
* "WIFI roaming" by channel scan (AP switching at low RSSI) (#2120)
* Activate 802.11kv wifi mesh roaming
* Activate roaming by scanning
* Revert stack reducation
* move Wifi, LWIP and BSSI to PSRAm
* added State Class "measurement" to rate_per_time_unit (#2116)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap
* use QOS0 for Homeassistant Discovery topics. the messages then could possibly get lost but we save a lot of heap
# Conflicts:
# code/components/jomjol_mqtt/server_mqtt.cpp
# Conflicts:
# code/components/jomjol_mqtt/server_mqtt.cpp
* .
* .
* move to next PR
* Update code/components/jomjol_mqtt/server_mqtt.cpp
* Update code/components/jomjol_mqtt/server_mqtt.cpp
---------
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com>
* moved functions
* use hostname as default MQTT maintopic if parameter is not set
* use hostname as default MQTT client ID
* Only send Homassistant Discovery and Static Topics on the first connect. Retry in next round if any topic failed
* .
* add missing return code usage
* send maintopic/connection on every round like the system topics
---------
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Show image for flow not started + take image
* Update
* Adding new images
* .
* Avoid multiple Access-Control-Allow-Origin * (#1859)
* Avoid multiple Access-Control-Allow-Origin *
* Adapt loglevel to debug
* Update build.yaml
* .
* New state "initialization (delayed)", renaming
* Overview: Renamed "Status" + switched position
* Improve data logging on errors (#1839)
* use error level for log if "Rate to High" or "Negative Rate"
* remove redundant data logging
* .
* .
* update time also in case of an error
* move calculation of difference to the top as discussed in PR 1839
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Heap tracing (#1861)
* Update sdkconfig.esp32cam-dev-task-analysis.defaults
* Update defines.h
* Update platformio.ini
* Update main.cpp
* Update defines.h
* Update ClassFlowCNNGeneral.cpp
* Update platformio.ini
* disable HIMEM (external > 4mb ram) not used (#1864)
#force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem]
#free 256kb of internal memory :
#I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory.
CONFIG_SPIRAM_BANKSWITCH_ENABLE=n
#CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set
* Update ota_page.html (#1866)
Fixed the firework to match the actual button text.
Fixed other random typos.
* add AlignmentAlgo=off option (#1867)
* Replace outdated wiki links, wording (#1871)
* Revert "add AlignmentAlgo=off option (#1867)" (#1876)
This reverts commit 3de4cc7c56.
* fixed typo (#1881)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Show WIFI signal text labels / Log RSSI value to logfile (#1877)
* Overview: WIFI RSSI strength text labels
* Log RSSI value (debug level)
* Typo
* Update config.ini (#1880)
* Update Changelog.md for release (#1892)
Co-authored-by: github-actions <github-actions@github.com>
* Update Changelog.md
* Remove newline in version (#1891)
* remove newline in version
* .
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: CaCO3 <caco3@ruinelli.ch>
Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com>
Co-authored-by: AngryApostrophe <89547888+AngryApostrophe@users.noreply.github.com>
Co-authored-by: github-actions <github-actions@github.com>
* use error level for log if "Rate to High" or "Negative Rate"
* remove redundant data logging
* .
* .
* update time also in case of an error
* move calculation of difference to the top as discussed in PR 1839
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* move main part to cam file
* added demo mode
* .
* add a define to configure the logfile handling (#1709)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Move Logfile Switch to define.h
* Update Reboot Algo
* Update server_ota.cpp
* Avoid loading of status infos twice (#1711)
* Force a reboot even reboot task cannot be created due to lack of heap (#1713)
* Deinit all components before reboot
* Update
* Update
* Force reboot when reboot task cannot be created
* Improve log message when web UI is incomplete (#1716)
* improve warning if version.txt is missing
* typo
* show round duration in log
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* .
* .
* .
* creade demo dir
* fix static IP in UP, improve explanation for HA (#1719)
* fix static IP in UP, improve explanation for HA
* Update edit_config_param.html
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Create demo folder at startup (if not present)
* move demo files
* Update defines.h (#1726)
* updated description
* moved to expert section
* fixed broken enabled state
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com>
* fix special case where number is named "default" (keep all topics in top level instead of in a sub-group)
* re-implemented SNTP usage, added way to disable NTP client, added timezone table
* minor fixes
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* comment translation
* translation part #2
* code translation from DE to ENG #part3
* translation #4
* dismantled =>splitted
* bereich => range
* Update defines.h
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
* defines changes
* Finish #define move + #define STBI_ONLY_JPEGsave 2% of Flash
* remove the defines on the old places
* ClassFlowCNNGeneral in define.h
* revert to origin
* fix translation not ready
* Fix for securing wlan.ini (#1509)
* Fix for securing wlan.ini
* Fixing error with ' instead of "
* Changing to errorcode 403
* maybe strcmp instead of regular ==
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
* Update Web-Installer
* solves #1530 (#1531)
* Refactor JSON (#1518)
* use correct log level
* corrected logging
* typo
* refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre"
* Wrapped 'rate' into double quotes, like all other JSON values
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Various corrections (#1519)
* use correct log level
* corrected logging
* typo
* add release to webinstaller
* changed logs, added INFO log of raw, value, error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Prevent auto restart on cam framebuffer init error (#1522)
* use correct log level
* revert autorestart on camera framebuffer init error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* #1524 - ensure the recognized digit is less than 10 (#1525)
* fix kernel panic (vector out of range) in getReadoutRawString
* fix key of caches
* fix key of caches
* fix key caches
* fix cache keys
* fix cache keys
* move set variables to top
* debug
* fix key
* testing
* try fix changelog
* test
* Update Changelog.md for release
* Revert "Update Changelog.md for release"
This reverts commit 4f51ec7962.
* remove testing
* fix release creation
* testing
* Update Changelog.md for release
* test
* Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device"
This reverts commit f68695a4c0, reversing
changes made to a096cf7182.
* Revert "test"
This reverts commit a096cf7182.
* revert testing
* #1524 - ensure the result of ZeigerEvalHybridNeu is <10
* Fix late digit transition #1503
Co-authored-by: github-actions <github-actions@github.com>
* fix frozen time in datafile on error (#1534)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* log NTP server name (#1497)
* log NTP server name
* .
* .
* replace calls to /wasserzaehler.html with calls to /value (#1469)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Fix cookie usage, use correct http response codes, add 404 page (#1495)
* replaced some HTTP response code with better matching codes
* add custom 404 page, add log entry for debugging
* fix cookie
* replace non-necessary whitespace
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Don't autofail if NTP server can't be reached during initalization (#1498)
This fixes an issue with a restricted network without internet access,
where the hardcoded ntp server can't be reached and thus the esp resets,
as it's not able to finish initalization.
* Update Changelog.md
* Update Changelog.md for release
* Fix for securing wlan.ini (#1509)
* Fix for securing wlan.ini
* Fixing error with ' instead of "
* Changing to errorcode 403
* maybe strcmp instead of regular ==
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
* Update Web-Installer
* solves #1530 (#1531)
* Refactor JSON (#1518)
* use correct log level
* corrected logging
* typo
* refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre"
* Wrapped 'rate' into double quotes, like all other JSON values
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Various corrections (#1519)
* use correct log level
* corrected logging
* typo
* add release to webinstaller
* changed logs, added INFO log of raw, value, error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Prevent auto restart on cam framebuffer init error (#1522)
* use correct log level
* revert autorestart on camera framebuffer init error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* #1524 - ensure the recognized digit is less than 10 (#1525)
* fix kernel panic (vector out of range) in getReadoutRawString
* fix key of caches
* fix key of caches
* fix key caches
* fix cache keys
* fix cache keys
* move set variables to top
* debug
* fix key
* testing
* try fix changelog
* test
* Update Changelog.md for release
* Revert "Update Changelog.md for release"
This reverts commit 4f51ec7962.
* remove testing
* fix release creation
* testing
* Update Changelog.md for release
* test
* Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device"
This reverts commit f68695a4c0, reversing
changes made to a096cf7182.
* Revert "test"
This reverts commit a096cf7182.
* revert testing
* #1524 - ensure the result of ZeigerEvalHybridNeu is <10
* Fix late digit transition #1503
Co-authored-by: github-actions <github-actions@github.com>
* only use sntp_getservername() after init sntp
* set default NTP server on dnew installations
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Ralf Rachinger <git@ralfrachinger.de>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
Co-authored-by: github-actions <github-actions@github.com>
Co-authored-by: parhedberg <par.hedberg@gmail.com>
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com>
Co-authored-by: Frank Haverland <fspapaping@googlemail.com>
* Renamed variables and added debug log (#1537)
* add debug logs
* renamed variables
* renamed TAGs, added flow status logging
* .
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* replaced printf usage in LogFile.WriteToFile()
* ENABLE_MQTT c++ macro definition (#1546)
* macro
* 2
* 2
* delete jomjol_mqtt from CMakeLists
* mqtt macro
* final
* ENABLE_INFLUXDB c++ macro definition (#1547)
* macro
* 2
* 2
* delete jomjol_mqtt from CMakeLists
* mqtt macro
* final
* ENABLE_INFLUXDB c++ macro definition
* Update Changelog.md
* Update Changelog.md
* Rearange task to CPU (http, camera, mqtt) (#1557)
* Streamlined MQTT interlock when not activated & interlock MQTT when WIFI is not connected (#1556)
* streamlined mqtt interlock when disabled
* Disconnect mqtt client before reboot
* Interlock MQTT with WIFI
* Update
* loglevel to DEBUG
* Update
* mqtt msg id incremental
* new ENABLE_MQTT includes
* Loglevel to DEBUG
* Loglevel
* Update interface_mqtt.cpp
* show uptime on overview page, moved labels from firmware to Web UI (#1543)
* show uptime on overview page, moved labels from firmware to Web UI
* show uptime on info page
* also use formated time in log
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Continue boot on bad PSRAM (#1558)
* add sensor status, show special index/setup page in case of a critical error
* continue booting on PSRAM error
* Update main.cpp
added log messages
* init PSRAM and add more log messages
* cleanup of init checks
* .
* .
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* add sensor status, show special index/setup page in case of a critical error (#1560)
* add sensor status, show special index/setup page in case of a critical error
* Added Reboot
* .
* added more buttons
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
* Update Webinstaller to v13.0.7
* remove html-from-11.3.1 in release (#1565)
* fix kernel panic (vector out of range) in getReadoutRawString
* fix key of caches
* fix key of caches
* fix key caches
* fix cache keys
* fix cache keys
* move set variables to top
* debug
* fix key
* testing
* try fix changelog
* test
* Update Changelog.md for release
* Revert "Update Changelog.md for release"
This reverts commit 4f51ec7962.
* remove testing
* fix release creation
* testing
* Update Changelog.md for release
* test
* Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device"
This reverts commit f68695a4c0, reversing
changes made to a096cf7182.
* Revert "test"
This reverts commit a096cf7182.
* revert testing
* #1524 - ensure the result of ZeigerEvalHybridNeu is <10
* Fix late digit transition #1503
* only initial_esp32_setup and update.zip as artefacts
* remove unneeded cache
* rename step ota-v2 to ota
* rename ota-v2 to ota
Co-authored-by: github-actions <github-actions@github.com>
* make the sidebar on the overviw page wider and show the round counter (#1570)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Create reply-bot.yml
* Update ClassFlowPostProcessing.cpp
* Add bot (#1581)
* Update reply-bot.yml
* Create label-commenter-config.yml
* added missing html change
* extended instructions (#1583)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Fix Rate Problem
* removed redundant "Status:"
* Bugfix Double Extract ZIP-Files
* Update FeatureRequest.md (#1591)
in case of position change between the measurments set this state to true, if there is no change set it back to false.
In a defined time window this movement can lead into an alarm state / water leak..
haveing this state in the mqtt broker can trigger functions like closing the ater pipe walve and so on...
* Update manifest.json
* Delete .gitignore
* Delete .gitmodules
* Delete firmware.bin
* Add files via upload
* Block REST API calls till resource is ready (#1609)
* Block REST API call till ressource is ready
* Update
* Update
* Update
* replace relative include of gethost.js with absolute one. This is needed as that file gets incuded on dynamically generated content which can be on different path levels (#1610)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* esp_spiram.h has been replaced by esp32/spiram.h (#1605)
* esp_spiram.h has been replaced by esp32/spiram.h
* Preparations for next Bugfix Release (#1615)
* Merge branch 'rolling' (#1559)
* Fix for securing wlan.ini (#1509)
* Fix for securing wlan.ini
* Fixing error with ' instead of "
* Changing to errorcode 403
* maybe strcmp instead of regular ==
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
* Update Web-Installer
* solves #1530 (#1531)
* Refactor JSON (#1518)
* use correct log level
* corrected logging
* typo
* refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre"
* Wrapped 'rate' into double quotes, like all other JSON values
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Various corrections (#1519)
* use correct log level
* corrected logging
* typo
* add release to webinstaller
* changed logs, added INFO log of raw, value, error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Prevent auto restart on cam framebuffer init error (#1522)
* use correct log level
* revert autorestart on camera framebuffer init error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* #1524 - ensure the recognized digit is less than 10 (#1525)
* fix kernel panic (vector out of range) in getReadoutRawString
* fix key of caches
* fix key of caches
* fix key caches
* fix cache keys
* fix cache keys
* move set variables to top
* debug
* fix key
* testing
* try fix changelog
* test
* Update Changelog.md for release
* Revert "Update Changelog.md for release"
This reverts commit 4f51ec7962.
* remove testing
* fix release creation
* testing
* Update Changelog.md for release
* test
* Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device"
This reverts commit f68695a4c0, reversing
changes made to a096cf7182.
* Revert "test"
This reverts commit a096cf7182.
* revert testing
* #1524 - ensure the result of ZeigerEvalHybridNeu is <10
* Fix late digit transition #1503
Co-authored-by: github-actions <github-actions@github.com>
* fix frozen time in datafile on error (#1534)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* log NTP server name (#1497)
* log NTP server name
* .
* .
* replace calls to /wasserzaehler.html with calls to /value (#1469)
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Fix cookie usage, use correct http response codes, add 404 page (#1495)
* replaced some HTTP response code with better matching codes
* add custom 404 page, add log entry for debugging
* fix cookie
* replace non-necessary whitespace
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Don't autofail if NTP server can't be reached during initalization (#1498)
This fixes an issue with a restricted network without internet access,
where the hardcoded ntp server can't be reached and thus the esp resets,
as it's not able to finish initalization.
* Update Changelog.md
* Update Changelog.md for release
* Fix for securing wlan.ini (#1509)
* Fix for securing wlan.ini
* Fixing error with ' instead of "
* Changing to errorcode 403
* maybe strcmp instead of regular ==
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
* Update Web-Installer
* solves #1530 (#1531)
* Refactor JSON (#1518)
* use correct log level
* corrected logging
* typo
* refactored JSON generagion: removed unused parameters, consolidated into singel function, added "pre"
* Wrapped 'rate' into double quotes, like all other JSON values
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Various corrections (#1519)
* use correct log level
* corrected logging
* typo
* add release to webinstaller
* changed logs, added INFO log of raw, value, error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* Prevent auto restart on cam framebuffer init error (#1522)
* use correct log level
* revert autorestart on camera framebuffer init error
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* #1524 - ensure the recognized digit is less than 10 (#1525)
* fix kernel panic (vector out of range) in getReadoutRawString
* fix key of caches
* fix key of caches
* fix key caches
* fix cache keys
* fix cache keys
* move set variables to top
* debug
* fix key
* testing
* try fix changelog
* test
* Update Changelog.md for release
* Revert "Update Changelog.md for release"
This reverts commit 4f51ec7962.
* remove testing
* fix release creation
* testing
* Update Changelog.md for release
* test
* Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device"
This reverts commit f68695a4c0, reversing
changes made to a096cf7182.
* Revert "test"
This reverts commit a096cf7182.
* revert testing
* #1524 - ensure the result of ZeigerEvalHybridNeu is <10
* Fix late digit transition #1503
Co-authored-by: github-actions <github-actions@github.com>
* only use sntp_getservername() after init sntp
* set default NTP server on dnew installations
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Ralf Rachinger <git@ralfrachinger.de>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
Co-authored-by: github-actions <github-actions@github.com>
Co-authored-by: parhedberg <par.hedberg@gmail.com>
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com>
Co-authored-by: Frank Haverland <fspapaping@googlemail.com>
* Renamed variables and added debug log (#1537)
* add debug logs
* renamed variables
* renamed TAGs, added flow status logging
* .
* .
Co-authored-by: CaCO3 <caco@ruinelli.ch>
* replaced printf usage in LogFile.WriteToFile()
* ENABLE_MQTT c++ macro definition (#1546)
* macro
* 2
* 2
* delete jomjol_mqtt from CMakeLists
* mqtt macro
* final
* ENABLE_INFLUXDB c++ macro definition (#1547)
* macro
* 2
* 2
* delete jomjol_mqtt from CMakeLists
* mqtt macro
* final
* ENABLE_INFLUXDB c++ macro definition
* Update Changelog.md
Co-authored-by: parhedberg <par.hedberg@gmail.com>
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com>
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Frank Haverland <fspapaping@googlemail.com>
Co-authored-by: github-actions <github-actions@github.com>
Co-authored-by: Ralf Rachinger <git@ralfrachinger.de>
Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com>
* Update Changelog.md for release
Co-authored-by: parhedberg <par.hedberg@gmail.com>
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com>
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Frank Haverland <fspapaping@googlemail.com>
Co-authored-by: github-actions <github-actions@github.com>
Co-authored-by: Ralf Rachinger <git@ralfrachinger.de>
Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com>
* new model version (#1619)
* fix kernel panic (vector out of range) in getReadoutRawString
* fix key of caches
* fix key of caches
* fix key caches
* fix cache keys
* fix cache keys
* move set variables to top
* debug
* fix key
* testing
* try fix changelog
* test
* Update Changelog.md for release
* Revert "Update Changelog.md for release"
This reverts commit 4f51ec7962.
* remove testing
* fix release creation
* testing
* Update Changelog.md for release
* test
* Revert "Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device"
This reverts commit f68695a4c0, reversing
changes made to a096cf7182.
* Revert "test"
This reverts commit a096cf7182.
* revert testing
* #1524 - ensure the result of ZeigerEvalHybridNeu is <10
* Fix late digit transition #1503
* only initial_esp32_setup and update.zip as artefacts
* remove unneeded cache
* rename step ota-v2 to ota
* rename ota-v2 to ota
* new models
- ana-class100 v1.5.4
- ana-cont-11.0.4
- dig-class100 v1.5.0
Co-authored-by: github-actions <github-actions@github.com>
* Update Changelog.md (#1630)
* Correct RenameNumber
* Update Changelog.md
* Fix reloading of data file (#1635)
* Update data.html
* fixed
* show link to graph
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: parhedberg <par.hedberg@gmail.com>
Co-authored-by: Pär Hedberg <par.hedberg@nordicmedtest.se>
Co-authored-by: jomjol <30766535+jomjol@users.noreply.github.com>
Co-authored-by: Christopher Fenner <9592452+CFenner@users.noreply.github.com>
Co-authored-by: CaCO3 <caco@ruinelli.ch>
Co-authored-by: Frank Haverland <fspapaping@googlemail.com>
Co-authored-by: github-actions <github-actions@github.com>
Co-authored-by: Ralf Rachinger <git@ralfrachinger.de>
Co-authored-by: Nicolas Liaudat <nliaudat@users.noreply.github.com>
Co-authored-by: Slider0007 <115730895+Slider0007@users.noreply.github.com>
Co-authored-by: smartboart <38385805+smartboart@users.noreply.github.com>
* modify mqtt init at startup + after disconnection
* mqtt_init only when not initialized
* Minor udapte
* Apply suggestions from code review
Co-authored-by: CaCO3 <caco3@ruinelli.ch>
* Correct typo
Co-authored-by: CaCO3 <caco3@ruinelli.ch>
