Mirror/AI-on-the-edge-device
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device.git synced 2025-12-19 22:18:26 +03:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/haverland/AI-on-the-edge-device

Browse Source
This commit is contained in:
Frank Haverland
2022-11-28 20:45:42 +01:00
parent a096cf7182 2901263556
commit f68695a4c0
1 changed files with 34 additions and 26 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
Changelog.md
View File

@@ -2,32 +2,38 @@
## [Unreleased]
## [13.0.11] - 2022-11-28
**Home Assistant MQTT Discovery Support**
### Update Procedure
:bangbang: **Make sure to read the instructions below carfully!**.
1. Backup your configuration (use the `System -> Backup/Restore` page)!
1. You should update to `12.0.1` before you update to this release. All other migrations are untested.
1. Upload and update the `update-*.zip` file from this release.
1. Let it restart and check on the `System -> Info` page that the Firmware as well as the Web UI got updated. If only one got updated, redo the update. If it fails several times, you also can update the Firmware and the Web UI separately.
1. Safe way:
1. Update first the `firmware.bin` (extract from zip file) and do the Reboot
1. Update with the full zip file (`update-*.zip`, ignore the version warning after the reboot)
1. Please go to `Settings -> Configuration` and address the changed parameters:
* DataLogging (storing the values for data graph)
* Debug (extended by different debug reporting levels)
2. You should update to `12.0.1` before you update to this release. All other migrations are untested.
3. Upload and update the `update-*.zip` file from this release.
4. Let it restart and check on the `System -> Info` page that the Firmware as well as the Web UI got updated. If only one got updated, redo the update. If it fails several times, you also can update the Firmware and the Web UI separately.
5. Safe way:
1. Update first the `firmware.bin` (extract from zip file) and do the Reboot
2. Update with the full zip file (`update-*.zip`, ignore the version warning after the reboot)
6. Please go to `Settings -> Configuration` and address the changed parameters:
- DataLogging (storing the values for data graph)
- Debug (extended by different debug reporting levels)
If anything breaks you can try to enforce manual update as following:
**OTA:**
1. Make sure the last run of the update completed the **Uploading** step.
1. Call `http://<IP>/ota?task=update&file=<UPLOAD_FILENAME>` to enforce the extraction/flashing.
1\. Make sure the last run of the update completed the **Uploading** step.
1\. Call `http://<IP>/ota?task=update&file=<UPLOAD_FILENAME>` to enforce the extraction/flashing.
**Initial Setup:**
1. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative to have a clean install.
1\. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative to have a clean install.
### Added
@@ -38,6 +44,7 @@ If anything breaks you can try to enforce manual update as following:
- Format: csv - comma separated
- Content: `time`, `name-of-number`, `raw-value`, `return-value`, `pre-value`, `change-rate`, `change-absolute`, `error-text`, `cnn-digital`, `cnn-analog`
- Show graph of values direct in the user interface (thanks to [@rdmueller](https://github.com/rdmueller))
- Using new data logging (see above)
- Possibility to choose different values and switch between different numbers (if present)
@@ -47,7 +54,6 @@ If anything breaks you can try to enforce manual update as following:
- Version check (Firmware vs. Web UI)
- Various minor new features
### Changed
- Updated tflite (`dig-cont_0600_s3.tflite`)
@@ -56,6 +62,7 @@ If anything breaks you can try to enforce manual update as following:
- [#1176](https://github.com/jomjol/AI-on-the-edge-device/discussions/1176) accept minor negative values (-0.2) if extended resolution is enabled
- [#1143](https://github.com/jomjol/AI-on-the-edge-device/issues/1143) added config parameter `AnalogDigitalTransitionStart`. It can setup very early and very late digit transition starts.
- New version of `dig-class100` (v1.4.0): added images of heliowatt powermeter
### Fixed
- [#1116](https://github.com/jomjol/AI-on-the-edge-device/issues/1116) precision problem at setting prevalue
@@ -71,7 +78,6 @@ If anything breaks you can try to enforce manual update as following:
- n.a.
## [12.0.1] 2022-09-29
Improve **u**ser e**x**perience
@@ -88,8 +94,8 @@ Improve **u**ser e**x**perience
5. Now you can reboot.
If anything breaks you can try to
1. Call `http://<IP>/ota?task=update&file=firmware.bin` resp. `http://<IP>/ota?task=update&file=html.zip` if the upload successed but the extraction failed.
1. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative.
1\. Call `http://<IP>/ota?task=update&file=firmware.bin` resp. `http://<IP>/ota?task=update&file=html.zip` if the upload successed but the extraction failed.
1\. Use the initial_esp32_setup.zip ( <https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation> ) as alternative.
### Added
@@ -741,7 +747,9 @@ External Illumination
- Initial Version
[Unreleased]: https://github.com/jomjol/AI-on-the-edge-device/compare/12.0.1...HEAD
[Unreleased]: https://github.com/haverland/AI-on-the-edge-device/compare/13.0.11...HEAD
[13.0.11]: https://github.com/haverland/AI-on-the-edge-device/compare/12.0.1...13.0.11
[12.0.1]: https://github.com/jomjol/AI-on-the-edge-device/compare/11.3.1...12.0.1