From f66ea4f01f035fb95b5763d83658c5acdf9ccbe1 Mon Sep 17 00:00:00 2001
From: CaCO3 <caco3@ruinelli.ch>
Date: Sun, 29 Jan 2023 18:12:20 +0100
Subject: [PATCH] Update index.html

---
 docs/index.html | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/docs/index.html b/docs/index.html
index 85aa2bc8..3ffecafe 100644
--- a/docs/index.html
+++ b/docs/index.html
@@ -26,10 +26,12 @@
       
       <p>Notes:</p>
       <ul>
-         <li>For the installation, make sure to switch the ESP32 to Bootloader mode!</li> -         <li>The SD-Card still must be flashed separately on a PC (See in the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#sd-card>documentation</a>)!</li>
+         <li>For the installation, make sure to switch the ESP32 to Bootloader mode!</li>
          <li>After the installation, a manual reset might be required!</li>
          <li>Please note that not all webbrowsers and operating systems support the needed access to USB!</li>
- -         <li>Check the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation>documentation</a> for additional information.</li>
+         <li>Check the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation>documentation</a> for additional information.</li>
+         <li>The SD-Card still must be setup separately. This can be done manually or using the new <b>Remote Setup</b>. See the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#sd-card>documentation</a> for further instructions!</li>
+         
       </ul>
             
       <p><esp-web-install-button manifest="manifest.json"></esp-web-install-button></p>