Mirror/AI-on-the-edge-device
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device.git synced 2025-12-14 07:26:53 +03:00
Code Issues Packages Projects Releases Wiki Activity

update web installer

Browse Source
This commit is contained in:
CaCO3
2023-10-21 22:15:47 +02:00
committed by GitHub
parent 18917b2d82
commit e2bfcd26c9
4 changed files with 17 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
docs/index.html
View File

@@ -18,14 +18,15 @@
For further information about AI-on-the-edge-device please go to <a href=https://github.com/jomjol/AI-on-the-edge-device target=_blank>https://github.com/jomjol/AI-on-the-edge-device</a>.</p>
<p>Notes:</p>
<h2>Notes:</h2>
<ul>
<li>For the installation, make sure to switch the ESP32 to Bootloader mode!</li>
<li>The Webinstall will install the latest firmware (Version $VERSION).</li>
<li>For the installation, make sure to switch the ESP32 to Bootloader mode by keeping the <b>FLASH</b> button pressed while the <b>RESET</b> button gets relesed. if there is no <b>FLASH</b> button, you need to pull <b>GPIO0</b> low!</li>
<li>After the installation, a manual reset might be required!</li>
<li>Please note that not all web browsers and operating systems support the necessary USB access!</li>
<li>Please note that not all web browsers and operating systems support the necessary USB access needed for this Webinstaller!</li>
<li>Check the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation target=_blank>documentation</a> for additional information.</li>
<li>The SD card must still be set up separately. This can be done manually or using the new <b>Remote Setup</b>. See the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#3-sd-card target=_blank>documentation</a> for further instructions!</li>
<li>The SD card can be setup automatically after the firmware got installed. See <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#remote-setup-using-the-built-in-access-point>jomjol.github.io/AI-on-the-edge-device-docs/Installation</a> for details. For this to work, the SD card must be FAT formated (which is the default on a new SD card).
Alternatively the SD card still can be setup manually, see the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#3-sd-card target=_blank>documentation</a> for details!</li>
</ul>
<p><esp-web-install-button manifest="manifest.json"></esp-web-install-button></p>