diff --git a/docs/index.html b/docs/index.html index 7f114447..144f1310 100644 --- a/docs/index.html +++ b/docs/index.html @@ -9,45 +9,7 @@ padding-left: 60px; padding-right: 60px; "> -

Welcome to the AI-on-the-edge-device

-

Artificial intelligence based systems have been established in our every days live. Just think of speech or image recognition. Most of the systems relay on either powerful processors or a direct connection to the cloud for doing the calculations up there. With the increasing power of modern processors the AI systems are coming closer to the end user - which is usually called edge computing. - Here this edge computing is brought into a practical oriented example, where a AI network is implemented on a ESP32 device so: AI on the edge. -

-

This projects allows you to digitalize your analoge water, gas, power and other meters using cheap and easily available hardware.

-

All you need is an ESP32 board with a supported camera and a bit of a practical hand.

-

-

Key features

- -

Workflow

-

The device takes a photo of your meter at a defined interval. It then extracts the Regions of Interest (ROI's) out of it and runs them through an artificial inteligence. As a result, you get the digitalized value of your meter.

-

There are several options what to do with that value. Either send it to a MQTT broker, write it to an InfluxDb or simply provide it throug a REST API.

-

-

Impressions

-

AI-on-the-edge-device on a Water Meter

-

-

Web Interface (Water Meter)

-

-

AI-on-the-edge-device on a Electrical Power Meter

-

-

Setup

-

There is a growing wiki which provides you with a lot of information. - Head there to get a start, set it up and configure it. -

-

There are also a articles in the German Heise magazine "make:" about the setup and the technical background (behind a paywall) : DIY - Setup

-

For further background information, head to Neural Networks, Training Neural Networks and Programming on the ESP32

- -

Download

-

The latest available version is available on the Releases page.

-

Initially you will have to flash it through an USB connection. Later an update is possible directly over the Air (OTA).

... or use the

- +

Welcome to the AI-on-the-edge-device Web Installer

Webinstaller and Console

(AI-on-the-edge-device Installer powered by ESP Web Tools)

- -

Casing

-

A 3d-printable housing can be found here:

- -

Build it yourself

-

See Build Instructions.

- -

If you would like to support the developer with a cup of coffee you can do that via Paypal.

-

-

-

-

-

- -

- If you have any technical topics, you can create an Issue.

-

In other cases you can contact the developer via email:

-

Changes and History

-

See Changelog

-

Tools

- -

Additional Ideas

-

There are some ideas and feature requests which are not followed currently - mainly due to capacity reasons on side of the developer. They are collected here: FeatureRequest.md

- + diff --git a/docs/releases/download/v11.2.0/bootloader.bin b/docs/releases/download/v11.2.0/bootloader.bin new file mode 100644 index 00000000..07a73f5f Binary files /dev/null and b/docs/releases/download/v11.2.0/bootloader.bin differ diff --git a/docs/releases/download/v11.2.0/partitions.bin b/docs/releases/download/v11.2.0/partitions.bin new file mode 100644 index 00000000..31d08b2f Binary files /dev/null and b/docs/releases/download/v11.2.0/partitions.bin differ diff --git a/docs/releases/download/v12.0.1/firmware.bin b/docs/releases/download/v12.0.1/firmware.bin new file mode 100644 index 00000000..14904df2 Binary files /dev/null and b/docs/releases/download/v12.0.1/firmware.bin differ