Rolling 20220924

code/components/esp32-camera-master/Kconfig

@@ -69,6 +69,45 @@ menu "Camera configuration"
         help
             Enable this option if you want to use the BF3005.
             Disable this option to save memory.
+            
+    config BF20A6_SUPPORT
+        bool "Support BF20A6(BYD20A6) VGA"
+        default y
+        help
+            Enable this option if you want to use the BF20A6.
+            Disable this option to save memory.
+
+    config SC101IOT_SUPPORT
+        bool "Support SC101IOT HD"
+        default n
+        help
+            Enable this option if you want to use the SC101IOT.
+            Disable this option to save memory.
+
+    choice SC101_REGS_SELECT
+        prompt "SC101iot default regs"
+        default SC101IOT_720P_15FPS_ENABLED
+        depends on SC101IOT_SUPPORT
+        help
+            Currently SC010iot has several register sets available.
+            Select the one that matches your needs.
+
+        config SC101IOT_720P_15FPS_ENABLED
+            bool "xclk20M_720p_15fps"
+        help
+            Select this option means that when xclk is 20M, the frame rate is 15fps at 720p resolution.
+        config SC101IOT_VGA_25FPS_ENABLED
+            bool "xclk20M_VGA_25fps"
+        help
+            Select this option means that when xclk is 20M, the frame rate is 25fps at VGA resolution.
+    endchoice
+
+    config SC030IOT_SUPPORT
+        bool "Support SC030IOT VGA"
+        default y
+        help
+            Enable this option if you want to use the SC030IOT.
+            Disable this option to save memory.
 
     choice SCCB_HARDWARE_I2C_PORT
         bool "I2C peripheral to use for SCCB"
@@ -103,6 +142,12 @@ menu "Camera configuration"
             bool "Subsample Mode"
     endchoice
 
+    config CAMERA_TASK_STACK_SIZE
+        int "CAM task stack size"
+        default 2048
+        help
+            Camera task stack size
+
     choice CAMERA_TASK_PINNED_TO_CORE
         bool "Camera task pinned to core"
         default CAMERA_CORE0
@@ -124,6 +169,37 @@ menu "Camera configuration"
         default 32768
         help
             Maximum value of DMA buffer
-            Larger values may fail to allocate due to insufficient contiguous memory blocks, and smaller value may cause DMA interrupt to be too frequent
+            Larger values may fail to allocate due to insufficient contiguous memory blocks, and smaller value may cause DMA interrupt to be too frequent.
 
+    config CAMERA_CONVERTER_ENABLED
+        bool "Enable camera RGB/YUV converter"
+        depends on IDF_TARGET_ESP32S3
+        default n
+        help
+            Enable this option if you want to use RGB565/YUV422/YUV420/YUV411 format conversion.
+
+    choice CAMERA_CONV_PROTOCOL
+        bool "Camera converter protocol"
+        depends on CAMERA_CONVERTER_ENABLED
+        default LCD_CAM_CONV_BT601_ENABLED
+        help
+            Supports format conversion under both BT601 and BT709 standards.
+
+        config LCD_CAM_CONV_BT601_ENABLED
+            bool "BT601"
+        config LCD_CAM_CONV_BT709_ENABLED
+            bool "BT709"
+    endchoice
+
+    config LCD_CAM_CONV_FULL_RANGE_ENABLED
+        bool "Camera converter full range mode"
+        depends on CAMERA_CONVERTER_ENABLED
+        default y
+        help
+            Supports format conversion under both full color range mode and limited color range mode.
+            If full color range mode is selected, the color range of RGB or YUV is 0~255.
+            If limited color range mode is selected, the color range of RGB is 16~240, and the color range of YUV is Y[16~240], UV[16~235].
+            Full color range mode has a wider color range, so details in the image show more clearly.
+            Please confirm the color range mode of the current camera sensor, incorrect color range mode may cause color difference in the final converted image.
+            Full range mode is used by default. If this option is not selected, the format conversion function will be done using the limited range mode.
 endmenu