diff --git a/docs/index.html b/docs/index.html
index e542a976..85aa2bc8 100644
--- a/docs/index.html
+++ b/docs/index.html
@@ -26,11 +26,10 @@
       
       <p>Notes:</p>
       <ul>
-         <li>For the installation, make sure to switch the ESP32 to Bootloader mode!</li>
-         <li>Beside the firmware, also the SD-Card needs to be flashed. This can be done manually or through an initial simple access point.<br>Instructions see <a href=https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation>Wiki</a>!</li>
+         <li>For the installation, make sure to switch the ESP32 to Bootloader mode!</li> -         <li>The SD-Card still must be flashed separately on a PC (See in the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation/#sd-card>documentation</a>)!</li>
          <li>After the installation, a manual reset might be required!</li>
          <li>Please note that not all webbrowsers and operating systems support the needed access to USB!</li>
-         <li>Check the <a href=https://github.com/jomjol/AI-on-the-edge-device/wiki/Installation>Wiki</a> for additional information.</li>
+ -         <li>Check the <a href=https://jomjol.github.io/AI-on-the-edge-device-docs/Installation>documentation</a> for additional information.</li>
       </ul>
             
       <p><esp-web-install-button manifest="manifest.json"></esp-web-install-button></p>