Mirror/AI-on-the-edge-device-docs
1
0
Fork 0
mirror of https://github.com/jomjol/AI-on-the-edge-device-docs.git synced 2025-12-15 16:06:56 +03:00
Code Issues Packages Projects Releases Wiki Activity

added first pages to nav

Browse Source
This commit is contained in:
CaCO3
2023-01-03 08:11:27 +01:00
parent d5d2435214
commit bf5f82131b
7 changed files with 53 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
docs/FAQs.md
View File

@@ -1,6 +1,6 @@
# Frequently Asked Questions
#### My device is reboot frequently. What can I do?
## My device is reboot frequently. What can I do?
There are several reasons for the reboot:
@@ -11,7 +11,7 @@ There are several reasons for the reboot:
There is a dedicated Wiki page about this: [[Frequent Reboots]]
#### How accurate are the detections?
### How accurate are the detections?
It is hard to give a specific accuracy number. It depends on many factors, e.g.
@@ -26,12 +26,12 @@ Anecdotally, the authors of this wiki have great success with the meter. While t
See the FAQs below for more details and configuration hints.
#### My numbers are not corrected detected. What can I do?
## My numbers are not corrected detected. What can I do?
* There is a dedicated Wiki page about the correct setting [[ROI Configuration]]
* This page also includes the instructions for gathering new images for the training.
#### How can I ensure invalid numbers are never reported?
## How can I ensure invalid numbers are never reported?
As mentioned above, the AI algorithm is not perfect. Sometimes it may read an incorrect value.
@@ -42,7 +42,7 @@ You can change the following settings to reduce incorrect readings (but potentia
* Change `PostProcessing` configuration option `MaxRateType` to be time based instead of absolute. Set `MaxRateValue` to something realistic (e.g. `5` gal/min). You can often find the max flow rate your meter supports directly on the cover.
* Reduce `AutoTimer` configuration option `Intervall` to the lowest it can be (e.g. `3` min). The more often you take readings, the less likely for data staleness to occur.
#### Even after I have setup everything perfect there is a false reading - especially around the zero crossing (roll over to next number)
## Even after I have setup everything perfect there is a false reading - especially around the zero crossing (roll over to next number)
* The roll over behavior is different for the different meters. E.g.:
* Rolling over start with different previous position (e.g. at 7, 8 or 9)
* The neutral position (no rolling) is not perfectly at zero, but rather at something like 7.9 or 8.1, even if it should be exactly 8