From b65e77511c3d5d7b4981176b1456e028bf56d7c5 Mon Sep 17 00:00:00 2001 From: CaCO3 Date: Sun, 5 Feb 2023 01:14:03 +0100 Subject: [PATCH] . --- param-docs/parameter-pages/Alignment/AlignmentAlgo.md | 1 - param-docs/parameter-pages/Alignment/FlipImageSize.md | 1 - param-docs/parameter-pages/Alignment/InitialMirror.md | 1 - param-docs/parameter-pages/Alignment/InitialRotate.md | 1 - param-docs/parameter-pages/Alignment/SearchFieldX.md | 1 - param-docs/parameter-pages/Alignment/SearchFieldY.md | 1 - param-docs/parameter-pages/Analog/CNNGoodThreshold.md | 1 - param-docs/parameter-pages/Analog/ExtendedResolution.md | 1 - param-docs/parameter-pages/Analog/LogImageLocation.md | 1 - param-docs/parameter-pages/Analog/LogfileRetentionInDays.md | 1 - param-docs/parameter-pages/Analog/Model.md | 1 - param-docs/parameter-pages/AutoTimer/AutoStart.md | 1 - param-docs/parameter-pages/AutoTimer/Intervall.md | 1 - param-docs/parameter-pages/DataLogging/DataLogActive.md | 1 - param-docs/parameter-pages/DataLogging/DataLogRetentionInDays.md | 1 - param-docs/parameter-pages/Debug/Logfile.md | 1 - param-docs/parameter-pages/Debug/LogfileRetentionInDays.md | 1 - param-docs/parameter-pages/Digits/CNNGoodThreshold.md | 1 - param-docs/parameter-pages/Digits/LogImageLocation.md | 1 - param-docs/parameter-pages/Digits/LogfileRetentionInDays.md | 1 - param-docs/parameter-pages/Digits/Model.md | 1 - param-docs/parameter-pages/GPIO/IO0.md | 1 - param-docs/parameter-pages/GPIO/IO1.md | 1 - param-docs/parameter-pages/GPIO/IO12.md | 1 - param-docs/parameter-pages/GPIO/IO13.md | 1 - param-docs/parameter-pages/GPIO/IO3.md | 1 - param-docs/parameter-pages/GPIO/IO4.md | 1 - param-docs/parameter-pages/GPIO/LEDColor.md | 1 - param-docs/parameter-pages/GPIO/LEDNumbers.md | 1 - param-docs/parameter-pages/GPIO/LEDType.md | 1 - param-docs/parameter-pages/GPIO/MainTopicMQTT.md | 1 - param-docs/parameter-pages/InfluxDB/Database.md | 1 - param-docs/parameter-pages/InfluxDB/Measurement.md | 1 - param-docs/parameter-pages/InfluxDB/Uri.md | 1 - param-docs/parameter-pages/InfluxDB/password.md | 1 - param-docs/parameter-pages/InfluxDB/user.md | 1 - param-docs/parameter-pages/MQTT/ClientID.md | 1 - param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md | 1 - param-docs/parameter-pages/MQTT/MainTopic.md | 1 - param-docs/parameter-pages/MQTT/MeterType.md | 1 - param-docs/parameter-pages/MQTT/SetRetainFlag.md | 1 - param-docs/parameter-pages/MQTT/Uri.md | 1 - param-docs/parameter-pages/MQTT/password.md | 1 - param-docs/parameter-pages/MQTT/user.md | 1 - param-docs/parameter-pages/MakeImage/Brightness.md | 1 - param-docs/parameter-pages/MakeImage/Contrast.md | 1 - param-docs/parameter-pages/MakeImage/Demo.md | 1 - param-docs/parameter-pages/MakeImage/FixedExposure.md | 1 - param-docs/parameter-pages/MakeImage/ImageQuality.md | 1 - param-docs/parameter-pages/MakeImage/ImageSize.md | 1 - param-docs/parameter-pages/MakeImage/LEDIntensity.md | 1 - param-docs/parameter-pages/MakeImage/LogImageLocation.md | 1 - param-docs/parameter-pages/MakeImage/LogfileRetentionInDays.md | 1 - param-docs/parameter-pages/MakeImage/Saturation.md | 1 - param-docs/parameter-pages/MakeImage/WaitBeforeTakingPicture.md | 1 - .../PostProcessing/.AnalogDigitalTransitionStart.md | 1 - .../parameter-pages/PostProcessing/.DecimalShift.md | 1 - .../PostProcessing/.ExtendedResolution.md | 1 - .../parameter-pages/PostProcessing/.IgnoreLeadingNaN.md | 1 - .../parameter-pages/PostProcessing/.MaxRateType.md | 1 - .../parameter-pages/PostProcessing/.MaxRateValue.md | 1 - .../PostProcessing/.AllowNegativeRates.md | 1 - param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md | 1 - .../PostProcessing/CheckDigitIncreaseConsistency.md | 1 - param-docs/parameter-pages/PostProcessing/ErrorMessage.md | 1 - param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md | 1 - param-docs/parameter-pages/PostProcessing/PreValueUse.md | 1 - param-docs/parameter-pages/System/AutoAdjustSummertime.md | 1 - param-docs/parameter-pages/System/Hostname.md | 1 - param-docs/parameter-pages/System/RSSIThreashold.md | 1 - param-docs/parameter-pages/System/SetupMode.md | 1 - param-docs/parameter-pages/System/TimeServer.md | 1 - param-docs/parameter-pages/System/TimeZone.md | 1 - param-docs/templates/parameter.md | 1 - 74 files changed, 74 deletions(-) diff --git a/param-docs/parameter-pages/Alignment/AlignmentAlgo.md b/param-docs/parameter-pages/Alignment/AlignmentAlgo.md index bfff8af..4077abc 100644 --- a/param-docs/parameter-pages/Alignment/AlignmentAlgo.md +++ b/param-docs/parameter-pages/Alignment/AlignmentAlgo.md @@ -4,7 +4,6 @@ Default Value: `Default` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Algorithm used for the alignment step. - `Default`: Use only red color channel diff --git a/param-docs/parameter-pages/Alignment/FlipImageSize.md b/param-docs/parameter-pages/Alignment/FlipImageSize.md index 609bffd..4a1d2f5 100644 --- a/param-docs/parameter-pages/Alignment/FlipImageSize.md +++ b/param-docs/parameter-pages/Alignment/FlipImageSize.md @@ -7,7 +7,6 @@ Default Value: `false` !!! Note This parameter is not accessible through the Web Interface Configuration Page! -## Description This parameter can be used to rotate the viewport together with the alignment rotation: ![](img/flipImageSize.png) diff --git a/param-docs/parameter-pages/Alignment/InitialMirror.md b/param-docs/parameter-pages/Alignment/InitialMirror.md index ac0ab09..d6f3aec 100644 --- a/param-docs/parameter-pages/Alignment/InitialMirror.md +++ b/param-docs/parameter-pages/Alignment/InitialMirror.md @@ -6,6 +6,5 @@ Default Value: `false` !!! Note This parameter is not accessible through the Web Interface Configuration Page! -## Description Please fill me with an explanation and useful links diff --git a/param-docs/parameter-pages/Alignment/InitialRotate.md b/param-docs/parameter-pages/Alignment/InitialRotate.md index a99b3ea..32436eb 100644 --- a/param-docs/parameter-pages/Alignment/InitialRotate.md +++ b/param-docs/parameter-pages/Alignment/InitialRotate.md @@ -6,6 +6,5 @@ Default Value: `179` !!! Note This parameter is not accessible through the Web Interface Configuration Page! -## Description Please fill me with an explanation and useful links diff --git a/param-docs/parameter-pages/Alignment/SearchFieldX.md b/param-docs/parameter-pages/Alignment/SearchFieldX.md index ea0f1ef..310825f 100644 --- a/param-docs/parameter-pages/Alignment/SearchFieldX.md +++ b/param-docs/parameter-pages/Alignment/SearchFieldX.md @@ -4,5 +4,4 @@ Default Value: `20` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description `x` size (width) in which the reference is searched. diff --git a/param-docs/parameter-pages/Alignment/SearchFieldY.md b/param-docs/parameter-pages/Alignment/SearchFieldY.md index 23554eb..0e290da 100644 --- a/param-docs/parameter-pages/Alignment/SearchFieldY.md +++ b/param-docs/parameter-pages/Alignment/SearchFieldY.md @@ -4,6 +4,5 @@ Default Value: `20` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description `y` size (height) in which the reference is searched. diff --git a/param-docs/parameter-pages/Analog/CNNGoodThreshold.md b/param-docs/parameter-pages/Analog/CNNGoodThreshold.md index 38404c8..779fe31 100644 --- a/param-docs/parameter-pages/Analog/CNNGoodThreshold.md +++ b/param-docs/parameter-pages/Analog/CNNGoodThreshold.md @@ -4,7 +4,6 @@ Default Value: `0.5` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Threshold above which the classification should be to accept the value (only meaningful for digits). !!! Warning diff --git a/param-docs/parameter-pages/Analog/ExtendedResolution.md b/param-docs/parameter-pages/Analog/ExtendedResolution.md index 332fe07..d0bd965 100644 --- a/param-docs/parameter-pages/Analog/ExtendedResolution.md +++ b/param-docs/parameter-pages/Analog/ExtendedResolution.md @@ -5,6 +5,5 @@ Default Value: `true` -## Description Please fill me with an explanation and useful links diff --git a/param-docs/parameter-pages/Analog/LogImageLocation.md b/param-docs/parameter-pages/Analog/LogImageLocation.md index ae6da0d..1deebe6 100644 --- a/param-docs/parameter-pages/Analog/LogImageLocation.md +++ b/param-docs/parameter-pages/Analog/LogImageLocation.md @@ -2,7 +2,6 @@ Default Value: `/log/analog` -## Description Location to store separated analog images on the SD-Card for logging. !!! Warning diff --git a/param-docs/parameter-pages/Analog/LogfileRetentionInDays.md b/param-docs/parameter-pages/Analog/LogfileRetentionInDays.md index 218ea5c..8651cf5 100644 --- a/param-docs/parameter-pages/Analog/LogfileRetentionInDays.md +++ b/param-docs/parameter-pages/Analog/LogfileRetentionInDays.md @@ -1,5 +1,4 @@ # Parameter `LogfileRetentionInDays` Default Value: `3` -## Description Days to keep the separated analog images (`0` = forever). diff --git a/param-docs/parameter-pages/Analog/Model.md b/param-docs/parameter-pages/Analog/Model.md index 301e8e5..342fa44 100644 --- a/param-docs/parameter-pages/Analog/Model.md +++ b/param-docs/parameter-pages/Analog/Model.md @@ -1,5 +1,4 @@ # Parameter `Model` Default Value: `/config/ana-cont_11.3.1_s2.tflite` -## Description Path to CNN model file for image recognition. See [here](../Choosing-the-Model) for details. diff --git a/param-docs/parameter-pages/AutoTimer/AutoStart.md b/param-docs/parameter-pages/AutoTimer/AutoStart.md index 287c4f7..fff75c8 100644 --- a/param-docs/parameter-pages/AutoTimer/AutoStart.md +++ b/param-docs/parameter-pages/AutoTimer/AutoStart.md @@ -4,7 +4,6 @@ Default Value: `true` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Automatically start the Flow (Digitization Rounds) immediately after power up. !!! Note diff --git a/param-docs/parameter-pages/AutoTimer/Intervall.md b/param-docs/parameter-pages/AutoTimer/Intervall.md index c1e67a4..a61699c 100644 --- a/param-docs/parameter-pages/AutoTimer/Intervall.md +++ b/param-docs/parameter-pages/AutoTimer/Intervall.md @@ -1,6 +1,5 @@ # Parameter `Intervall` Default Value: `5` -## Description Interval in minutes in which the Flow (Digitization Round) is run. If a rund takes longer than this interval, the next round gets postponed until the current round completes. diff --git a/param-docs/parameter-pages/DataLogging/DataLogActive.md b/param-docs/parameter-pages/DataLogging/DataLogActive.md index cbcd8ff..5786210 100644 --- a/param-docs/parameter-pages/DataLogging/DataLogActive.md +++ b/param-docs/parameter-pages/DataLogging/DataLogActive.md @@ -1,7 +1,6 @@ # Parameter `DataLogActive` Default Value: `true` -## Description Activate data logging to SD-Card. !!! Warning diff --git a/param-docs/parameter-pages/DataLogging/DataLogRetentionInDays.md b/param-docs/parameter-pages/DataLogging/DataLogRetentionInDays.md index 6c365f5..b925184 100644 --- a/param-docs/parameter-pages/DataLogging/DataLogRetentionInDays.md +++ b/param-docs/parameter-pages/DataLogging/DataLogRetentionInDays.md @@ -4,5 +4,4 @@ Default Value: `3` -## Description Number of days to keep the data files (`0` = forever). diff --git a/param-docs/parameter-pages/Debug/Logfile.md b/param-docs/parameter-pages/Debug/Logfile.md index 0a64872..feab73b 100644 --- a/param-docs/parameter-pages/Debug/Logfile.md +++ b/param-docs/parameter-pages/Debug/Logfile.md @@ -1,7 +1,6 @@ # Parameter `Logfile` Default Value: `1` (`ERROR`) -## Description Define the log level for the logging to the SD-Card. Available options: diff --git a/param-docs/parameter-pages/Debug/LogfileRetentionInDays.md b/param-docs/parameter-pages/Debug/LogfileRetentionInDays.md index ba0e2d8..72597ae 100644 --- a/param-docs/parameter-pages/Debug/LogfileRetentionInDays.md +++ b/param-docs/parameter-pages/Debug/LogfileRetentionInDays.md @@ -1,5 +1,4 @@ # Parameter `LogfileRetentionInDays` Default Value: `3` -## Description Number of days to keep the log files (`0` = forever). diff --git a/param-docs/parameter-pages/Digits/CNNGoodThreshold.md b/param-docs/parameter-pages/Digits/CNNGoodThreshold.md index 38404c8..779fe31 100644 --- a/param-docs/parameter-pages/Digits/CNNGoodThreshold.md +++ b/param-docs/parameter-pages/Digits/CNNGoodThreshold.md @@ -4,7 +4,6 @@ Default Value: `0.5` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Threshold above which the classification should be to accept the value (only meaningful for digits). !!! Warning diff --git a/param-docs/parameter-pages/Digits/LogImageLocation.md b/param-docs/parameter-pages/Digits/LogImageLocation.md index 81fd048..949f660 100644 --- a/param-docs/parameter-pages/Digits/LogImageLocation.md +++ b/param-docs/parameter-pages/Digits/LogImageLocation.md @@ -1,7 +1,6 @@ # Parameter `LogImageLocation` Default Value: `/log/digit` -## Description Location to store separated digit images on the SD-Card for logging. !!! Warning diff --git a/param-docs/parameter-pages/Digits/LogfileRetentionInDays.md b/param-docs/parameter-pages/Digits/LogfileRetentionInDays.md index f111dc3..40fe6d3 100644 --- a/param-docs/parameter-pages/Digits/LogfileRetentionInDays.md +++ b/param-docs/parameter-pages/Digits/LogfileRetentionInDays.md @@ -1,6 +1,5 @@ # Parameter `LogfileRetentionInDays` Default Value: `3` -## Description Days to keep the separated digit images (`0` = forever). diff --git a/param-docs/parameter-pages/Digits/Model.md b/param-docs/parameter-pages/Digits/Model.md index a76c4a1..bc066c1 100644 --- a/param-docs/parameter-pages/Digits/Model.md +++ b/param-docs/parameter-pages/Digits/Model.md @@ -1,5 +1,4 @@ # Parameter `Model` Default Value: `/config/dig-cont_0600_s3.tflite` -## Description Path to CNN model file for image recognition. See [here](../Choosing-the-Model) for details. diff --git a/param-docs/parameter-pages/GPIO/IO0.md b/param-docs/parameter-pages/GPIO/IO0.md index 6df0615..a9b180a 100644 --- a/param-docs/parameter-pages/GPIO/IO0.md +++ b/param-docs/parameter-pages/GPIO/IO0.md @@ -4,7 +4,6 @@ Default Value: `input disabled 10 false false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description This parameter can be used to configure the GPIO `IO0` pin. !!! Warning diff --git a/param-docs/parameter-pages/GPIO/IO1.md b/param-docs/parameter-pages/GPIO/IO1.md index 266b0a7..481a847 100644 --- a/param-docs/parameter-pages/GPIO/IO1.md +++ b/param-docs/parameter-pages/GPIO/IO1.md @@ -4,7 +4,6 @@ Default Value: `input disabled 10 false false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description This parameter can be used to configure the GPIO `IO1` pin. !!! Warning diff --git a/param-docs/parameter-pages/GPIO/IO12.md b/param-docs/parameter-pages/GPIO/IO12.md index de28702..f5f62b8 100644 --- a/param-docs/parameter-pages/GPIO/IO12.md +++ b/param-docs/parameter-pages/GPIO/IO12.md @@ -4,7 +4,6 @@ Default Value: `input-pullup disabled 10 false false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description This parameter can be used to configure the GPIO `IO12` pin. !!! Note diff --git a/param-docs/parameter-pages/GPIO/IO13.md b/param-docs/parameter-pages/GPIO/IO13.md index bda52aa..64bd642 100644 --- a/param-docs/parameter-pages/GPIO/IO13.md +++ b/param-docs/parameter-pages/GPIO/IO13.md @@ -4,7 +4,6 @@ Default Value: `input-pullup disabled 10 false false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description This parameter can be used to configure the GPIO `IO13` pin. !!! Note diff --git a/param-docs/parameter-pages/GPIO/IO3.md b/param-docs/parameter-pages/GPIO/IO3.md index e345339..7d00209 100644 --- a/param-docs/parameter-pages/GPIO/IO3.md +++ b/param-docs/parameter-pages/GPIO/IO3.md @@ -4,7 +4,6 @@ Default Value: `input disabled 10 false false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description This parameter can be used to configure the GPIO `IO3` pin. !!! Warning diff --git a/param-docs/parameter-pages/GPIO/IO4.md b/param-docs/parameter-pages/GPIO/IO4.md index d2cddbe..f59883d 100644 --- a/param-docs/parameter-pages/GPIO/IO4.md +++ b/param-docs/parameter-pages/GPIO/IO4.md @@ -4,7 +4,6 @@ Default Value: `built-in-led disabled 10 false false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description This parameter can be used to configure the GPIO `IO4` pin. !!! Warning diff --git a/param-docs/parameter-pages/GPIO/LEDColor.md b/param-docs/parameter-pages/GPIO/LEDColor.md index 6cbf84c..ea76aac 100644 --- a/param-docs/parameter-pages/GPIO/LEDColor.md +++ b/param-docs/parameter-pages/GPIO/LEDColor.md @@ -1,6 +1,5 @@ # Parameter `LEDColor` Default Value: `150 150 150` -## Description Color of the attached LEDs to GPIO12 in (R)ed, (G)reen (B)lue from `0` (full off) .. `255` (full on). (See `IO12` parameter). diff --git a/param-docs/parameter-pages/GPIO/LEDNumbers.md b/param-docs/parameter-pages/GPIO/LEDNumbers.md index ebd20f8..b151b24 100644 --- a/param-docs/parameter-pages/GPIO/LEDNumbers.md +++ b/param-docs/parameter-pages/GPIO/LEDNumbers.md @@ -1,5 +1,4 @@ # Parameter `LEDNumbers` Default Value: `2` -## Description Number of LEDs on the external LED-stripe attached to GPIO12 (See `IO12` parameter). diff --git a/param-docs/parameter-pages/GPIO/LEDType.md b/param-docs/parameter-pages/GPIO/LEDType.md index 2d5d8a5..1cee7d6 100644 --- a/param-docs/parameter-pages/GPIO/LEDType.md +++ b/param-docs/parameter-pages/GPIO/LEDType.md @@ -1,5 +1,4 @@ # Parameter `LEDType` Default Value: `WS2812` -## Description Type of the `WS2812x` which is connected to GPIO12 (See `IO12` parameter). diff --git a/param-docs/parameter-pages/GPIO/MainTopicMQTT.md b/param-docs/parameter-pages/GPIO/MainTopicMQTT.md index f10734d..db5b0ca 100644 --- a/param-docs/parameter-pages/GPIO/MainTopicMQTT.md +++ b/param-docs/parameter-pages/GPIO/MainTopicMQTT.md @@ -6,6 +6,5 @@ Default Value: `wasserzaehler/GPIO` !!! Note This parameter is not accessible through the Web Interface Configuration Page! -## Description Please fill me with an explanation and useful links diff --git a/param-docs/parameter-pages/InfluxDB/Database.md b/param-docs/parameter-pages/InfluxDB/Database.md index f2de52f..75cef16 100644 --- a/param-docs/parameter-pages/InfluxDB/Database.md +++ b/param-docs/parameter-pages/InfluxDB/Database.md @@ -1,5 +1,4 @@ # Parameter `Database` Default Value: `` -## Description Name of the Database into which to publish the values. diff --git a/param-docs/parameter-pages/InfluxDB/Measurement.md b/param-docs/parameter-pages/InfluxDB/Measurement.md index f9910c2..9d49750 100644 --- a/param-docs/parameter-pages/InfluxDB/Measurement.md +++ b/param-docs/parameter-pages/InfluxDB/Measurement.md @@ -1,5 +1,4 @@ # Parameter `Measurement` Default Value: `undefined` -## Description Name of the Measurement to use to publish the value. diff --git a/param-docs/parameter-pages/InfluxDB/Uri.md b/param-docs/parameter-pages/InfluxDB/Uri.md index f337899..c546b52 100644 --- a/param-docs/parameter-pages/InfluxDB/Uri.md +++ b/param-docs/parameter-pages/InfluxDB/Uri.md @@ -1,7 +1,6 @@ # Parameter `Uri` Default Value: `undefined` -## Description URI of the HTTP interface to InfluxDB v1, without trailing slash, e.g. `http://IP-Address:Port`. !!! Note diff --git a/param-docs/parameter-pages/InfluxDB/password.md b/param-docs/parameter-pages/InfluxDB/password.md index b430487..28965c7 100644 --- a/param-docs/parameter-pages/InfluxDB/password.md +++ b/param-docs/parameter-pages/InfluxDB/password.md @@ -1,7 +1,6 @@ # Parameter `password` Default Value: `undefined` -## Description Password for the InfluxDB v1 authentication. !!! Note diff --git a/param-docs/parameter-pages/InfluxDB/user.md b/param-docs/parameter-pages/InfluxDB/user.md index e8d4d71..7ffc613 100644 --- a/param-docs/parameter-pages/InfluxDB/user.md +++ b/param-docs/parameter-pages/InfluxDB/user.md @@ -1,7 +1,6 @@ # Parameter `user` Default Value: `undefined` -## Description Username for the InfluxDB v1 authentication. !!! Note diff --git a/param-docs/parameter-pages/MQTT/ClientID.md b/param-docs/parameter-pages/MQTT/ClientID.md index 5d76109..ff3ab48 100644 --- a/param-docs/parameter-pages/MQTT/ClientID.md +++ b/param-docs/parameter-pages/MQTT/ClientID.md @@ -1,7 +1,6 @@ # Parameter `ClientID` Default Value: `watermeter` -## Description ClientID to connect to the MQTT broker. If disabled, the `hostname` will be used. \ No newline at end of file diff --git a/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md b/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md index bc50003..275faf8 100644 --- a/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md +++ b/param-docs/parameter-pages/MQTT/HomeassistantDiscovery.md @@ -1,7 +1,6 @@ # Parameter `HomeassistantDiscovery` Default Value: `true` -## Description Enable or disable the Homeassistant Discovery. See [here](../Integration-Home-Assistant) for details about the discovery. \ No newline at end of file diff --git a/param-docs/parameter-pages/MQTT/MainTopic.md b/param-docs/parameter-pages/MQTT/MainTopic.md index e6f5aec..43b4532 100644 --- a/param-docs/parameter-pages/MQTT/MainTopic.md +++ b/param-docs/parameter-pages/MQTT/MainTopic.md @@ -1,7 +1,6 @@ # Parameter `MainTopic` Default Value: `watermeter` -## Description MQTT main topic, under which the counters are published. The single value will be published with the following key: `MAINTOPIC/NUMBER/RESULT_TOPIC` where: diff --git a/param-docs/parameter-pages/MQTT/MeterType.md b/param-docs/parameter-pages/MQTT/MeterType.md index 81c304f..6bc9f05 100644 --- a/param-docs/parameter-pages/MQTT/MeterType.md +++ b/param-docs/parameter-pages/MQTT/MeterType.md @@ -1,7 +1,6 @@ # Parameter `MeterType` Default Value: `other` -## Description Select the Meter Type so the sensors have the right units in Homeassistant. !!! Note diff --git a/param-docs/parameter-pages/MQTT/SetRetainFlag.md b/param-docs/parameter-pages/MQTT/SetRetainFlag.md index 9e556a9..8d089d6 100644 --- a/param-docs/parameter-pages/MQTT/SetRetainFlag.md +++ b/param-docs/parameter-pages/MQTT/SetRetainFlag.md @@ -1,6 +1,5 @@ # Parameter `SetRetainFlag` Default Value: `true` -## Description Enable or disable the retain flag for all MQTT entries. diff --git a/param-docs/parameter-pages/MQTT/Uri.md b/param-docs/parameter-pages/MQTT/Uri.md index 727fdda..6631164 100644 --- a/param-docs/parameter-pages/MQTT/Uri.md +++ b/param-docs/parameter-pages/MQTT/Uri.md @@ -1,5 +1,4 @@ # Parameter `Uri` Default Value: `mqtt://IP-ADRESS:1883` -## Description URI to the MQTT broker including the port. E.g. `mqtt://IP-Address:Port`. diff --git a/param-docs/parameter-pages/MQTT/password.md b/param-docs/parameter-pages/MQTT/password.md index a872393..9459cc9 100644 --- a/param-docs/parameter-pages/MQTT/password.md +++ b/param-docs/parameter-pages/MQTT/password.md @@ -1,6 +1,5 @@ # Parameter `password` Default Value: `PASSWORD` -## Description Password for MQTT authentication. diff --git a/param-docs/parameter-pages/MQTT/user.md b/param-docs/parameter-pages/MQTT/user.md index 99b5af3..7a4230a 100644 --- a/param-docs/parameter-pages/MQTT/user.md +++ b/param-docs/parameter-pages/MQTT/user.md @@ -1,5 +1,4 @@ # Parameter `user` Default Value: `USERNAME` -## Description Username for MQTT authentication. diff --git a/param-docs/parameter-pages/MakeImage/Brightness.md b/param-docs/parameter-pages/MakeImage/Brightness.md index 60d9b0f..4b259bb 100644 --- a/param-docs/parameter-pages/MakeImage/Brightness.md +++ b/param-docs/parameter-pages/MakeImage/Brightness.md @@ -5,5 +5,4 @@ Default Value: `0` This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. -## Description Image Brightness (`-2` .. `2`) diff --git a/param-docs/parameter-pages/MakeImage/Contrast.md b/param-docs/parameter-pages/MakeImage/Contrast.md index 8376022..f1b358e 100644 --- a/param-docs/parameter-pages/MakeImage/Contrast.md +++ b/param-docs/parameter-pages/MakeImage/Contrast.md @@ -5,7 +5,6 @@ Default Value: `0` This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. -## Description Image Contrast (`-2` .. `2`) !!! Note diff --git a/param-docs/parameter-pages/MakeImage/Demo.md b/param-docs/parameter-pages/MakeImage/Demo.md index 688c753..985b683 100644 --- a/param-docs/parameter-pages/MakeImage/Demo.md +++ b/param-docs/parameter-pages/MakeImage/Demo.md @@ -1,7 +1,6 @@ # Parameter `Demo` Default Value: `false` -## Description Enable to use demo images instead of the real camera images. Make sure to have a `/demo` folder on your SD-Card and it contains the expected files! Check [here](../Demo-Mode) for details. diff --git a/param-docs/parameter-pages/MakeImage/FixedExposure.md b/param-docs/parameter-pages/MakeImage/FixedExposure.md index 3df0ff4..57c77db 100644 --- a/param-docs/parameter-pages/MakeImage/FixedExposure.md +++ b/param-docs/parameter-pages/MakeImage/FixedExposure.md @@ -4,7 +4,6 @@ Default Value: `false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Fixes the illumination setting of camera at the startup and uses this later --> individual round is faster. diff --git a/param-docs/parameter-pages/MakeImage/ImageQuality.md b/param-docs/parameter-pages/MakeImage/ImageQuality.md index 234fa40..dfbfa3c 100644 --- a/param-docs/parameter-pages/MakeImage/ImageQuality.md +++ b/param-docs/parameter-pages/MakeImage/ImageQuality.md @@ -4,7 +4,6 @@ Default Value: `12` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Quality index for pictures. `0` (high) .. `63` (low) !!! Warning Values below `12` can result in reboots as the image gets larger and might no longer fit in the available RAM! diff --git a/param-docs/parameter-pages/MakeImage/ImageSize.md b/param-docs/parameter-pages/MakeImage/ImageSize.md index 9134c26..9545336 100644 --- a/param-docs/parameter-pages/MakeImage/ImageSize.md +++ b/param-docs/parameter-pages/MakeImage/ImageSize.md @@ -4,7 +4,6 @@ Default Value: `VGA` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Size of the camera picture. Available options: diff --git a/param-docs/parameter-pages/MakeImage/LEDIntensity.md b/param-docs/parameter-pages/MakeImage/LEDIntensity.md index 904f54c..212d1f8 100644 --- a/param-docs/parameter-pages/MakeImage/LEDIntensity.md +++ b/param-docs/parameter-pages/MakeImage/LEDIntensity.md @@ -5,5 +5,4 @@ Default Value: `50` This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. -## Description Set the Flash LED Intensity. diff --git a/param-docs/parameter-pages/MakeImage/LogImageLocation.md b/param-docs/parameter-pages/MakeImage/LogImageLocation.md index a8b1dbc..5188933 100644 --- a/param-docs/parameter-pages/MakeImage/LogImageLocation.md +++ b/param-docs/parameter-pages/MakeImage/LogImageLocation.md @@ -1,7 +1,6 @@ # Parameter `LogImageLocation` Default Value: `/log/source` -## Description Location on the SD-Card to store the raw images for logging. !!! Warning diff --git a/param-docs/parameter-pages/MakeImage/LogfileRetentionInDays.md b/param-docs/parameter-pages/MakeImage/LogfileRetentionInDays.md index 227c7fc..d0d8d42 100644 --- a/param-docs/parameter-pages/MakeImage/LogfileRetentionInDays.md +++ b/param-docs/parameter-pages/MakeImage/LogfileRetentionInDays.md @@ -1,5 +1,4 @@ # Parameter `LogfileRetentionInDays` Default Value: `15` -## Description Number of days to keep the raw images (`0` = forever) diff --git a/param-docs/parameter-pages/MakeImage/Saturation.md b/param-docs/parameter-pages/MakeImage/Saturation.md index 7618be8..461164d 100644 --- a/param-docs/parameter-pages/MakeImage/Saturation.md +++ b/param-docs/parameter-pages/MakeImage/Saturation.md @@ -5,7 +5,6 @@ Default Value: `0` This is an **Expert Parameter**! Only change it if you understand what it does! This parameter can also be set on the Reference Image configuration. -## Description Image Saturation (`-2` .. `2`) !!! Note diff --git a/param-docs/parameter-pages/MakeImage/WaitBeforeTakingPicture.md b/param-docs/parameter-pages/MakeImage/WaitBeforeTakingPicture.md index ba01a64..b4e0827 100644 --- a/param-docs/parameter-pages/MakeImage/WaitBeforeTakingPicture.md +++ b/param-docs/parameter-pages/MakeImage/WaitBeforeTakingPicture.md @@ -4,5 +4,4 @@ Default Value: `5` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Waiting time between switching illumination on and taking the picture (in seconds)- diff --git a/param-docs/parameter-pages/PostProcessing/.AnalogDigitalTransitionStart.md b/param-docs/parameter-pages/PostProcessing/.AnalogDigitalTransitionStart.md index bb1d173..bb21cc8 100644 --- a/param-docs/parameter-pages/PostProcessing/.AnalogDigitalTransitionStart.md +++ b/param-docs/parameter-pages/PostProcessing/.AnalogDigitalTransitionStart.md @@ -1,7 +1,6 @@ # Parameter `.AnalogDigitalTransitionStart` Default Value: `9.2` -## Description This can be used if you have wrong values, but the recognition of the individual ROIs are correct. Look for the start of changing of the first digit and note the analog pointer value behind. Set it here. Only used on combination of digits and analog pointers. diff --git a/param-docs/parameter-pages/PostProcessing/.DecimalShift.md b/param-docs/parameter-pages/PostProcessing/.DecimalShift.md index c93d273..4e15eea 100644 --- a/param-docs/parameter-pages/PostProcessing/.DecimalShift.md +++ b/param-docs/parameter-pages/PostProcessing/.DecimalShift.md @@ -1,6 +1,5 @@ # Parameter `.DecimalShift` Default Value: `0` -## Description Shift the decimal separator (positiv or negativ). Eg. to move from 'm³' to 'liter' (1 m³ equals 1000 liters), you need to set it to +3. diff --git a/param-docs/parameter-pages/PostProcessing/.ExtendedResolution.md b/param-docs/parameter-pages/PostProcessing/.ExtendedResolution.md index 8ba58ef..b0a5f86 100644 --- a/param-docs/parameter-pages/PostProcessing/.ExtendedResolution.md +++ b/param-docs/parameter-pages/PostProcessing/.ExtendedResolution.md @@ -1,5 +1,4 @@ # Parameter `.ExtendedResolution` Default Value: `false` -## Description Use the decimal place of the last analog counter for increased accuracy. diff --git a/param-docs/parameter-pages/PostProcessing/.IgnoreLeadingNaN.md b/param-docs/parameter-pages/PostProcessing/.IgnoreLeadingNaN.md index 5117668..93e96db 100644 --- a/param-docs/parameter-pages/PostProcessing/.IgnoreLeadingNaN.md +++ b/param-docs/parameter-pages/PostProcessing/.IgnoreLeadingNaN.md @@ -1,7 +1,6 @@ # Parameter `.IgnoreLeadingNaN` Default Value: `true` -## Description Leading `N`'s will be deleted before further processing. This is only relevant for models which use `N`! diff --git a/param-docs/parameter-pages/PostProcessing/.MaxRateType.md b/param-docs/parameter-pages/PostProcessing/.MaxRateType.md index a611563..45da6ad 100644 --- a/param-docs/parameter-pages/PostProcessing/.MaxRateType.md +++ b/param-docs/parameter-pages/PostProcessing/.MaxRateType.md @@ -1,6 +1,5 @@ # Parameter `.MaxRateType` Default Value: `AbsoluteChange` -## Description Defines if the **Change Rate** compared to the previous value is calculated as absolute change (`AbsoluteChange`) or as rate normalized to the interval (`RateChange` = change/minute). diff --git a/param-docs/parameter-pages/PostProcessing/.MaxRateValue.md b/param-docs/parameter-pages/PostProcessing/.MaxRateValue.md index 3d86488..f41cab7 100644 --- a/param-docs/parameter-pages/PostProcessing/.MaxRateValue.md +++ b/param-docs/parameter-pages/PostProcessing/.MaxRateValue.md @@ -1,7 +1,6 @@ # Parameter `.MaxRateValue` Default Value: `0.05` -## Description Maximum change of a reading. Depending on the settings of `.MaxRateType` it is either treated as `absolute` or `relative`! diff --git a/param-docs/parameter-pages/PostProcessing/.AllowNegativeRates.md b/param-docs/parameter-pages/PostProcessing/.AllowNegativeRates.md index 1fdca3c..3bb7342 100644 --- a/param-docs/parameter-pages/PostProcessing/.AllowNegativeRates.md +++ b/param-docs/parameter-pages/PostProcessing/.AllowNegativeRates.md @@ -1,7 +1,6 @@ # Parameter `.AllowNegativeRates` Default Value: `false` -## Description Allow a meter to count backwards (decreasing values). !!! Note diff --git a/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md b/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md index fbad940..f0a48ad 100644 --- a/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md +++ b/param-docs/parameter-pages/PostProcessing/AllowNegativeRates.md @@ -5,6 +5,5 @@ Default Value: `false` -## Description Please fill me with an explanation and useful links diff --git a/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md b/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md index 432b8df..d8963f2 100644 --- a/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md +++ b/param-docs/parameter-pages/PostProcessing/CheckDigitIncreaseConsistency.md @@ -4,7 +4,6 @@ Default Value: `false` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description An additional consistency check. It especially improves the zero crossing check between digits. diff --git a/param-docs/parameter-pages/PostProcessing/ErrorMessage.md b/param-docs/parameter-pages/PostProcessing/ErrorMessage.md index 1790254..2213efb 100644 --- a/param-docs/parameter-pages/PostProcessing/ErrorMessage.md +++ b/param-docs/parameter-pages/PostProcessing/ErrorMessage.md @@ -4,6 +4,5 @@ Default Value: `true` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Do not show error message in return value. In an error case, the last valid number will be used for the various transmission protocols (MQTT, InfluxDB, REST, ...). diff --git a/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md b/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md index 670be86..0c5987b 100644 --- a/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md +++ b/param-docs/parameter-pages/PostProcessing/PreValueAgeStartup.md @@ -4,5 +4,4 @@ Default Value: `720` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Time in minutes, how long a previous read value is valid after reboot. diff --git a/param-docs/parameter-pages/PostProcessing/PreValueUse.md b/param-docs/parameter-pages/PostProcessing/PreValueUse.md index 9dc1655..9a7084c 100644 --- a/param-docs/parameter-pages/PostProcessing/PreValueUse.md +++ b/param-docs/parameter-pages/PostProcessing/PreValueUse.md @@ -1,6 +1,5 @@ # Parameter `PreValueUse` Default Value: `true` -## Description Use the previous value (value from previous round) for consistency checks. This also work through a reboot of the device! diff --git a/param-docs/parameter-pages/System/AutoAdjustSummertime.md b/param-docs/parameter-pages/System/AutoAdjustSummertime.md index 6ba7902..b8bed5f 100644 --- a/param-docs/parameter-pages/System/AutoAdjustSummertime.md +++ b/param-docs/parameter-pages/System/AutoAdjustSummertime.md @@ -4,6 +4,5 @@ Default Value: `false` !!! Note This parameter is not accessible through the Web Interface Configuration Page! -## Description Please fill me with an explanation and useful links diff --git a/param-docs/parameter-pages/System/Hostname.md b/param-docs/parameter-pages/System/Hostname.md index e94632b..6c435cb 100644 --- a/param-docs/parameter-pages/System/Hostname.md +++ b/param-docs/parameter-pages/System/Hostname.md @@ -4,6 +4,5 @@ Default Value: `undefined` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Hostname for the device. It gets automatically transferred to `/wlan.ini` on the SD-Card at next startup. diff --git a/param-docs/parameter-pages/System/RSSIThreashold.md b/param-docs/parameter-pages/System/RSSIThreashold.md index fdcbd8b..40116b2 100644 --- a/param-docs/parameter-pages/System/RSSIThreashold.md +++ b/param-docs/parameter-pages/System/RSSIThreashold.md @@ -1,7 +1,6 @@ # Parameter `RSSIThreashold` Default Value: `` -## Description WLAN Mesh Parameter: Threshold for the RSSI value to check for start switching access point in a mesh system. Possible values: `-100` .. `0`, `0` = disabled. It gets automatically transferred to `/wlan.ini` on the SD-Card at next startup. diff --git a/param-docs/parameter-pages/System/SetupMode.md b/param-docs/parameter-pages/System/SetupMode.md index d4950bf..18fcdaa 100644 --- a/param-docs/parameter-pages/System/SetupMode.md +++ b/param-docs/parameter-pages/System/SetupMode.md @@ -4,5 +4,4 @@ Default Value: `true` !!! Note This parameter is not accessible through the Web Interface Configuration Page! -## Description Set this parameter to `true` to stay in the Setup Mode after the next start of the device. diff --git a/param-docs/parameter-pages/System/TimeServer.md b/param-docs/parameter-pages/System/TimeServer.md index 75189a4..f10713d 100644 --- a/param-docs/parameter-pages/System/TimeServer.md +++ b/param-docs/parameter-pages/System/TimeServer.md @@ -4,7 +4,6 @@ Default Value: `pool.ntp.org` !!! Warning This is an **Expert Parameter**! Only change it if you understand what it does! -## Description Time server to synchronize system time. If it is disabled or `undefined`, `pool.ntp.org` will be used. You can also set it to the IP of your router. Many routers like Fritzboxes can act as a local NTP server. To disable NTP, you need to activate it but set the TimeServer config to be empty (`""`). diff --git a/param-docs/parameter-pages/System/TimeZone.md b/param-docs/parameter-pages/System/TimeZone.md index ffe148b..fb6dfea 100644 --- a/param-docs/parameter-pages/System/TimeZone.md +++ b/param-docs/parameter-pages/System/TimeZone.md @@ -1,6 +1,5 @@ # Parameter `TimeZone` Default Value: `CET-1CEST,M3.5.0,M10.5.0/3` -## Description Time zone in POSIX syntax (Europe/Berlin = `CET-1CEST,M3.5.0,M10.5.0/3` - incl. daylight saving) Check the table on `http:///timezones.html` to find the settings for your region. diff --git a/param-docs/templates/parameter.md b/param-docs/templates/parameter.md index ead20fd..67f76d3 100644 --- a/param-docs/templates/parameter.md +++ b/param-docs/templates/parameter.md @@ -5,6 +5,5 @@ $EXPERT_PARAMETER $HIDDEN_IN_UI -## Description Please fill me with an explanation and useful links